Fender 63 Reverb Owner's Manual - page 4
Troubleshooter’s checklist
-
Is the power cord properly plugged into an electrical outlet?
-Is there power at the outlet?
-Is the volume control on the instrument turned up?
-Is your instrument properly plugged into the Reverb Unit?
-Does the guitar and amplifier work properly without the Reverb Unit?
(If so, then eliminate all other effects and try different guitar cords.)
-If, after checking all the above, the system is still not operating
properly, consult your authorized Fender Service Dealer.
‘63 Fender Reverb specifications
Brown W/Tan grille
Black W/Silver grille Blonde w/OxbIood grille
Part Number:
120V Version:
21-7500
021-7501
021-7502
230V Version:
21-7560
021-7561
021-7562
Input Impedance:
520k Ohms
Nominal Gain:
Mixer fully CCW: I (With Mixer turned above “‘I gain varies
from pan to pan and with frequency)
Power Requirement: 120V Version:
120 Volts AC, 60Hz, 45W Maximum
230V Version:
230 Volts AC, 50Hz, 45W Maximum
Dimensions:
Height:
10 1/2’ (26.7 cm)
Width:
18 7/8’ (47.9 cm)
Depth:
7 1/2’ (19.0 cm)
Weight:
13 Lbs. (5.9 kg)
‘63 Fender Reverb Block Diagram
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 91720