Reference and owner’s manual for the sfx keyboard 200 p/n 053448 rev c.
A message from the chairman since 1946, fender realized the importance of your amplifier. You see, your amplifier is more than just a combination of dials, wires and speakers. It is a finely tuned musical instrument. And like any fine musical instrument, it should be treated with special care and at...
Congratulations on your purchase of a fender sfx keyboard 200 amplifier. Your new fender amp is designed by the same tone-team that has created many other classic fender amps: like the tone- master ® , princeton ® chorus and the versatile hot rod series. Built with care and special attention to deta...
A. Inputs - plug your keyboard in here; these are line level input jacks. If sending a mono signal from your keyboard, plug your cord into the left or l/m input. B. Volume - adjusts the loudness of the sfx keyboard 200’s stereo channel 1 inputs. C. Low - adjusts the amount of increase or decrease in...
P. Volume - adjusts the loudness of the sfx keyboard 200’s mono channel. Q. Low - adjusts the amount of increase or decrease in the low frequency range of the sfx keyboard 200’s mono channel. R. Mid - adjusts the amount of increase or decrease in the middle frequency range of the sfx keyboard 200’s ...
6 sfx keyboard 200 rear panel a. Power switch - turns the ac power on and off. When the switch is in the off position, the amplifier is completely shut down. B. Line cord - this amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it t...
7 if the sfx keyboard 200 is set up but does not function, check the following items: • is the power cord properly plugged into an electrical outlet? • is there power at the outlet? • are the control knobs turned above 1? • is the volume control on the instrument turned up? • are the control knobs o...
Type: pr 372 part number: 22-8503 (120v) 22-8533 (240v) aust 22-8543 (230v) uk 22-8563 (230v) eur 22-8573 (100v) power requirements: 100v ac, 50/60 hz 450w 120v ac, 60 hz, 450w 230v ac, 50 hz, 450w 240v ac, 50 hz, 450w power amplifier section power output: 80w r.M.S. Per channel, (160w r.M.S. Total)...
