Fender BXR 200 Service Manual - Specifications
BXR 200
SPECIFICATIONS
Product Release No.:
PR 286
(This is not a model number)
POWER AMPLIFIER SECTION:
Power Output:
200 Watts RMS
Distortion at 200 watts:
Less than .1% @ 1kHz, below compression
Less than 1% @ 1kHz, maximum compression
Rated Load Impedance:
4
Ω
Sensitivity:
1.03V RMS
Input Impedance:
22k
Ω
DELTACOMP Range:
20db
PREAMP SECTION:
Input Impedance:
Input 1 – Greater than 420k
Ω
(typically
greater than 1M ohm in the passband)
Input 2 – 136k
Ω
Sensitivity for 200 watts:
Input 1 – 2.2mV
GAIN at maximum, all tone
Input 2 – 4.4mV
controls at “0” detent, no
enhancement activated.
Shelving Tone Controls:
LOW +/- 12dB at 60Hz
HIGH +/- 12dB at 10 kHz
Graphic Equalizer:
+/- 12dB at 80,140,250,450,800,1.4k,2.5k, 4.5k and 8kHz.
Dimensions:
BXR 200 Combo
BXR 200 Head
Height:25-1/2"
(64.8 cm)
6-29/32 inches (17.5cm)
Width: 21-1/2"
(54.6 cm)
Depth: 13-1/2"
(34.3 cm)
Weight:72 lbs.
(32.7 kg)
27 lbs
(12.3 kg)
Product specifications are subject to change without notice