T h e s o u n d t h a t c r e a t e s l e g e n d s p/n 040294 owner , s manual bxr 300c bxr 300r.
Introduction the fender bxr 300 amplifier is the most recent effort in state of the art bass amplifier technology, and is a member of the fender bxr series. The design execution of the bxr 300 was carried out with the aid of some of today’s best players, and represents years of thought and considera...
The front panel contains all items necessary for system operation and observation. Please read this section of the manual carefully to make sure you understand all the operational features of your new fender bxr 300. The front panel is similar for both the 300r and 300c. (a) input: two inputs are pr...
(l) speaker: speaker connections are four ohms minimum. The two jacks are wired in parallel. The bxr 300 is not designed for speaker impedance lower than 4 ohms total. (m) two speed fan: the two speed fan normally runs at low speed, and will automatically go to high speed when things get loud. High ...
T otal impedance 4 ohms bxr 410 speaker output input input impedance 8 ohms impedance 8 ohms figure #2 bxr 410 t otal impedance 4 ohms bxr 115 bxr 115 speaker output input input impedance 8 ohms impedance 8 ohms figure #1 t otal impedance 4 ohms bxr 115 bxr 410 speaker output input input impedance 8...
Suggested first time operation if this the first time you’ve used a fender bxr 300 we suggest that you try the following first time control setting procedure. Be sure the speaker is connected with a speaker cable (not an instrument cable) and the line cord is plugged into a suitable power source. If...
Specifications power amplifier section: power output 300 watts rated load impedance 4 ohms distortion at rated power less than .05% damping factor, at 4 ohms greater than 100 power bandwidth 20 hz - 20 khz input sensitivity 1.33 volt r.M.S. Input impedance >10k ohms slew factor greater than 1 signal...
