T h e s o u n d t h a t c r e a t e s l e g e n d s p/n 047059 owner , s manual ‘65 deluxe reverb type: pr 239.
Introduction your “new” ‘65 deluxe reverb amplifier is living proof of the quality and longevity of fender amplifier designs. Of all the fender amplifiers produced over the past 40 years, the deluxe reverb has probably been used on more recordings than any other amplifier in history. Over the years,...
A,b. Normal channel inputs- plug-in connection for instruments. Input 1 provides 6 db more gain than input 2. The reverb and vibrato features do not affect the normal channel. C. Normal channel volume control- adjusts the overall loudness of the normal channel. D. Treble control-adjusts the amount o...
M. Vibrato intensity control- adjusts the intensity of the vibrato feature. Turning the control full counter-clockwise turns the vibrato feature off. The vibrato feature can also be turned on and off using the the footswitch. Note that the vibrato feature does not affect the normal channel. A. Vibra...
A. Ground switch -set the ground switch to the position that produces the least amount of “buzz” or “hum” from the speakers (i 20v model only). B. Fuse- the fuse is in the ac supply of the amplifier and will help to protect the amplifier and the operator in the event of an electrical fault. If a fus...
Troubleshooter’s checklist line cord your amplifier is equipped with a grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded ac receptacle. Do not alter the ac plug. Tubes the ‘65 deluxe reverb tube complement consists of one fender special design ...
Part number: 120v version: 21-7400 dimensions: height: 17 1/2” (44.5cm) width: 24 1/2” (62.2cm) depth: 9 1/2” (24.1 cm) weight: 42lbs. (19.1 kg) power output: 22 watts r.M.S. Minimum into 8 ohms output impedance: 8 ohms input impedance: input 1, both channels: 1m ohms input 2, both channels: 136k oh...
