Specifications part number: 100v version: 081-2170-000 120v version: 081-2100-000 230v version: 081-2160-000 240v version: 081-2130-000 type: csr 10 dimensions: height: 10 in. (25.4cm) width: 24.5 in. (62.2cm) depth: 13.5 in. (34.3cm) weight: 70 lbs. (31.75kg) power requirements: 100v version: 100 v...
Rumble bass ® owners’ manual introduction the fender amp custom shop is dedicated to creating high quality amplification to serve top artists and discriminating players. The rumble bass is a unique amplifier with many possibilities. It is a 300 watt, two channel bass “head” with special features whi...
Rumble front panel functions a. A volume - adjusts the volume of channel a. B. Treble - adjusts the level of high frequencies in channel a. C. Bass - adjusts the level of low frequencies in channel a. D. Middle - adjusts the level of mid frequencies in channel a. E. Mid - selects whether pre-set mid...
J. Channel - selects whether channel a and channel b are to be separate (switch) or mixed (combine) together before being sent to the speaker jacks. K. Mid - selects whether pre-set mid frequencies are to be attenuated in channel b. L. B volume - adjusts the volume of channel b. M. Channel indicator...
Rumble bias and balance adjustment warning: bias and balance are pre-set at the factory. Make adjustments only when necessary. If you are unsure about setting the bias and balance, take your rumble bass to the nearest authorized fender service center. 1. Turn on the amplifier and let it warm up for ...
E. Effects - these switches select whether channel a, or channel b, or both are routed to the effects device. When either of the switches is on (up) the signal being sent to the speaker jacks is split. This secondary signal is diverted through the effects loop and is placed at the mix control. F. Ef...
