P/n 041224.
Tone-master ® owners’ manual introduction the fender amp custom shop is dedicated to creating high quality amplification to serve top artists and discriminating players. The tone-master is a unique amplifier with many possibilities. On the surface it is a 100 watt, 2 channel switching “head” amplifi...
Tone-master control functions a. Inputs -the guitar input for the tone-master. B. Fat - adds a 3db boost in gain to the a channel, mostly to the low and midrange frequen- cies. C. Volume a - controls the loudness of channel a. D. Treble - adjusts the overall brightness in the a channel. E. Bass - ad...
I. Gain - controls the gain or overdrive of channel b. J. Treble - adjusts the overall brightness of channel b. K. Bass - adjusts the amount of low frequencies through channel b. L. Mid - adjusts the amount of midrange frequencies through channel b. M. Volume- controls the loudness of channel b. Spe...
Tone master rear panel functions a. Fuse - the fuse is in the ac supply of the amplifier and will help to protect the amplifier in the event of an electrical fault or tube failure. If a fuse blows, it should only be replaced by one with the same type and rating. Never use a fuse of higher current ra...
F. External speaker - plug in connection for an external speaker. This jack must only be used in conjunction with the main speaker jack. If the external speaker jack is used without a cord plugged into the main speaker jack, there will be no sound. G. Footswitch jack - plug in connection for the foo...
Tone-master specifications part number: 081-2000-000 (120v) 081-2030-000 (240v australia) 081-2040-000 (230 uk) 081-2050-000 (230v) 081-2070-000 (100v) companion enclosures- with 4 12” celestion® “vintage 30” speakers- 081-3001-000 with 2-12” celestion “classic lead“ (g-12-80) speakers- 081-3000-000...
