Fender Ultimate Chorus Owner's Manual - page 7
ULTIMATE CHORUS FRONT PANEL FUNCTIONS
INPUT 1-
A high impedance, high sensitivity plug-in
connection for instruments.
INPUT 2-
Plug-in connection for instruments. This
input exhibits a lower input impedance and sensitivity
than INPUT 1 (Item A) and is useful with active preamp
guitars, and will provide a darker tone with passive
guitars. Both inputs are identical when used simulta-
neously.
VOLUME-
Adjusts the overall loudness of the Normal
Channel.
NORMAL CHANNEL INDICATOR-
This LED is illumi-
nated when the Normal Channel is active.
TREBLE-
Adjusts the amount of boost (accentuation) or
cut (attenuation) in the high frequency range of the
Normal Channel.
MID-
Adjusts the amount of boost or cut in the mid fre-
quency range of the Normal Channel.
BASS-
Adjusts the amount of boost or cut in the low
frequency range of the Normal Channel.
REVERB-
Adjusts the overall amount of reverberated
signal mixed with the original dry signal for the
Normal Channel.
GAIN-
Adjusts the amount of preamp amplification in
the Drive Channel. Cleaner sound is achieved at
lower gain settings; high gain settings will produce
more sustain and distortion. This control works in con-
junction with the DRIVE VOLUME control (Item L) to set
the overall loudness at the output while the Drive
Channel is active.
MID BOOST-
Activates a special pre-emphasis filter
that accentuates mid range frequencies. This boost
occurs pre distortion in the Drive Channel and will fur-
ther modify the distortion characteristic.
PRESENCE-
Adjusts the amount of boost or cut in the
upper high frequency range of the Drive Channel.
This control occurs post preamp distortion and is useful
in adjusting the distortion characteristic from brash, to
smooth.
VOLUME-
Adjusts the overall loudness of the Drive
Channel.
DRIVE CHANNEL INDICATOR-
This LED is illuminated
when the Drive Channel is active.
TREBLE-
Adjusts the amount of boost or cut in the high
frequency range of the Drive Channel.
MID-
Adjusts the amount of boost or cut in the mid fre-
quency range of the Drive Channel.
BASS-
Adjusts the amount of boost or cut in the low
frequency range of the Drive Channel.
DRIVE SELECT-
Activates the Drive Channel. NOTE:
This switch disables the Channel Select Footswitch and
the Normal Channel controls.
REVERB-
Adjusts the overall amount of reverberated
signal mixed with the original dry signal for the Drive
Channel.
RATE-
Adjusts the sweep rate of the chorus generating
circuitry. A lower number corresponds to a slower
rate of sweep.
SELECT-
Activates the stereo CHORUS mode for both
the Normal and Drive channels. NOTE: This switch
disables the Chorus Select Footswitch.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
VOLUME
TREBLE
MID
BASS
REVERB
GAIN
TREBLE
MID
INPUTS
1
2
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
3
7
6
4
0
1
9
10
8
5
2
NORMAL CHANNEL
DRIVE CHANNEL
A
B
C
D
E
F
G
H
I
J
K
L
N
O
M
0
0
0
0
0
0
VOLUME
2
3
7
6
4
0
1
9
10
8
5
0
PRESENCE
3
2
2
1
1
5
+
-
4
4
5
3
0
5
0
0
0