Feniex C-1020 Manual - Mounting Instructions:
3 | Haleo Switch Series
www.feniex.com
www.feniex.com
Mounting Instructions:
See Figure 1.0 for instructions on
exchanging a switch in the panel frame.
1.)Selecttheswitchtoberemoved
from the panel.
2.)Toremovetheswitch,firmlypress
the back of the switch from each side
and push it outwards from the switch
panel.
3.)Pushinthenewswitchfromthefront
of the panel and snap it into the frame.
3.)Drilltwo,0.125”mountingholeson
the mounting surface making sure no
vital components of the surface are
damaged.
4.)Makesuretode-burrtheholes
thoroughly.
5.)Usingcustomerprovidedscrews,
secure the Haleo switch panel to the
mounting surface.
SPECIFICATIONS:
LED back lit switches
Lightweight, durable aluminum frame
Option between black momentary switch or red on/off switch
mounting surface
figure 1.1
Screw
Hole
figure 1.0
Switch
Haleo
Bracket
Mounting Instructions:
See Figure 1.1 for mounting details
1.)Placetheunitagainsttheintendedmountingsurface.
2.)Marktheareaswherethemountingholeswillbedrilled.Ifthemountingsurface
is part of the vehicle, make sure no vital components could be damaged by the
drilling process.