Feniex C-4017 Instruction Manual - page 14
Feniex Industries, Inc.
1.800.615.8350
/
feniex.com
14
Rotary Dial Switch Typhoon Full Function
Position
Function
Activation
# Tones
OFF
Turns System Off
None
-
M1
Ramp Up/Ramp Down Press Manual to turn On
1
M2
Ramp Up
Press Manual to turn On
1
HF
Continuous On/Off
Press Manual to turn On and to select
Siren Tones. Press Manual twice to turn Off
3
T1
Continuous On/Off
Press Manual to switch between siren tones
2
T2
Continuous On/Off
Press Manual to switch between siren tones
2
T3
Continuous On/Off
Press Manual to switch between siren tones
2
Tone selector switch
Setting Siren Tones
Turn rotary dial to the position you would
like to program the siren tone.
Cycle through the tones using the tone
selector switch (shown right). To program
M1 and M2, hold the Manual button while
pressing the tone selector switch.
Important!
Only the buttons highlighted in red are
available to program.
HF, T1, T2, and T3 have multiple tones that
can be programmed. To switch between
the tones, press the manual button.
Release the siren tone button.