Feniex FUSION 1X Manual

FUSION

™

 1x / 2X 

MADE IN THE U.S.A 

1

Product Type:

Mode 2

Mode 2

Flash Pattern

Flash Pattern

Mode 1

Mode 1

Hardwire Option:

To operate the hard wire option, connect the black, 12V(-) wire to ground 

and the red, 12V(+) wire to an activated switch. To change patterns, tap 

the green flash pattern changer wire to the 12V(-) ground wire. To activate 

mode 2, connect the white wire to an activated 12V(+) switch.

Single Color

Dual Color

1X

2X

Mounting Specifications:

Make sure the suction cups have been cleaned with alcohol to remove 

all residue.

Stick lights onto the interior of the vehicle dash window.

Color Specifications:

A

R

B

W

G

RW

BW

AW

RB

AR

    AB

Optic: 

40

180

Cigarette Plug Option:

To operate the cigarette plug option, plug in the provided lighter plug into 

the vehicle's cigarette lighter plug outlet. Turn the unit on with the On/Off 

switch and change patterns with the momentary flash pattern changer.

Wiring Type: 

Hardwire

Cigarette Plug

12V

Red/Mode 1

White/Mode 2

Green/Pattern Changer

Black/Ground

+

Alternate Light Heads:

For the light heads to alternate, one light head must be set as master 

and the other as slave on the mode wire intended for use. To do so, 

hold the blue (flash pattern changer) wire to ground for 3 seconds. 

For Single color: if all LEDS turn on this indicates master mode. If no 

LEDS turn on this indicates slave mode. 

For Dual color: if all LEDS turn on this indicates master mode. If half of 

the LEDs turn on this indicates slave mode.