Feniex STORM PRO C-4014 Instruction Manual - 200W Wiring Diagram
TM
FENIEX.
2014
INSTRUCTION MANUAL
WEB.
www.feniex.com
11
Storm Pro - Instruction Manual
200W wiring DIAGRAM
radio
radio
speaker
Activating the Siren
Tones:
1. Extend the red, 12V (+)
wire to the (+) post of the
vehicle’s battery. Extend
the black, 12V (-) wire to
ground.
2. Connect the Horn,
Phaser, Yelp, and/or Wail
outputs to the red, 12V (+)
wire to activate function.
3. Connect both 100W
speaker outputs to a 100W,
11Ohm speaker (user
provided).
Activating Radio
Rebroadcast:
1. Extend the red, 12V (+)
wire to the (+) post of the
vehicle’s battery. Extend
the black, 12V (-) wire to
ground.
2. Connect the Broadcast
On input to the red, 12V(+)
wire to activate.
3. Connect both Radio In
outputs to the radio and
speaker wires.
V
1.0
- +
battery
100W 1
1ohm
Speaker
Positive 12V (+) Power
Negative 12V (-) Ground
Speaker 1 T1
Speaker 1 T2
Speaker 1 T3
Speaker 1 T4
Speaker 1 T5
Speaker 2 T1
Speaker 2 T2
Speaker 2 T3
Speaker 2 T4
Speaker 2 T5
Dual Tone Delay
Horn Ring
Horn Ring
Park Kill
Park Kill
Broadcast On
Radio In
Radio In
100W Speaker
100W Speaker
100W Speaker
100W Speaker
100W 1
1ohm
Speaker