Summary of FT-8100 HD
Page 1
User manual ft-8100 hd english.
Page 2
2 warning !!! On the usb memory function for ft-8100 hd model, user can make recording or playing function using by external usb devices such as usb flash memory disk or external usb hdd(hard disk). However, below condit ion should be remarked before applying. Remember: 1. To use the external usb de...
Page 3
3 safety inst ructions ..................................................................................................... 4 software for downloading ......................................................................................... 4 user manual................................................
Page 4
4 safety instruc tions please observe all warnings and instructions on the equipme nt and contained in these operating instructions. You must install the dish with correct direction and angle. Be sure to turn the receiver off and disconnect the ac power cord before cleaning the receiver surface. If ...
Page 5
5 symbols used on the receiver the digital video broadcasting logo. This logo tells you that this receiver is compliant with the dvb standards. The caution ris k of e lectrica l s hoc k - do not open symbol this sy mbol tells you that you are not allowed to open the receiver. Only authorized (se rvi...
Page 6
6 general inf ormation this digital terrestrial receiver is a highly cost-effective digital terrestrial receiver integrated. It prov ides big channels storage with fast searching. The receiver is definitely one of the best choices to deliver your digital life. 1. Main features • fully conforms to mp...
Page 7
7 installation of stb 1. Front pa nel 【 power 】 press to switch between on and off modes. 【 ch- 】 move cursor or channe l down 【 ch+ 】 move cursor or channel up 【 display screen 】 display the channel number and status. Power indicator. Signal indicator. 【 usb 】 usb for update software 2. Rea r pane ...
Page 8
8 remote controlle due to sta ndardization fact most of ferguson units is us ing the same remote control unit. That is why not all keys a re be ing use d by this stb model!! Power turns the receiver on/off. Tv/radio switches between tv and radio modes. Mute selects the sound on/off. Back returns to ...
Page 9
9 1. Connection diagram the following f igure shows cable connections required for tv and other re lated electrical equipment. If you need any assistance for specific equipment connection, please contact your local dealer. 1.1 connect to tv with hdmi cable (recommende d) 1. Connect lnb in port on re...
Page 10
10 1.3 connect scart port 1. Connect the antenna with lnb in of the stb. 2. Connect to tv as following figure. 1.4 connect audio system 1. Connect the antenna with lnb in of the stb. 2. Connect the spdif with digital theater systems to enjoy higher quality sound. 3. You can also connect audio l/r w ...
Page 11
11 quic k installation step 1: check the cable connections prior to powering up the receiver, ensure that all cables are correctly connected. Ensure that the unit is connected to a/v equipment and the power socket. Step 2: insert the cam (with smart card) released by your se rvice provide r. Inse rt...
Page 12
12 the mainmenu inf ormation after connecting the stb and switch on the power; the subject unit comes into work. If the signal is ready and there are programs saved in the unit, the tv will show the channel which when you turn off last time. The unit will be in normal play mode after getting signal....
Page 13
13 1.3 lc n the logical channel number (lcn), also known as virtual channe l means a channe l, which is different from the actual channel or frequency in which it is transmitted. Used for the automatic numbe ring of channels in accordance with a proposal for the prov ide r. 1.4 time setting user can...
Page 14
14 1.7 factory reset this operation re moves any changes made by the user. The receiver will return to its factory settings. Upon completion of this operation receiver will automatically be rebooted. 2. Video setting user can choose below options of video control: tv system: ntsc or pal. Hd output: ...
Page 15
15 4.2 auto sea rch scan all available channe ls that depends on the nation setting in the install guide. After searching well, new searched tv and radio programs will be added to the corresponding program list. 4.3 f irm wa re update via usb warning: do not turn off the power during the update. Thi...
Page 16
16 6. Program guide it provides information of the current and next programs on different channels. The information is only available from the network to which the channel you are watching. Press key to switch between program list and epg list. The contents shown on the up-right windows and epg list...
Page 17
17 specifications.
Page 18
18.