Ferimex ISM Antennas Instructions
Instructions for Assembling ISM Antennas
List of Parts:
1) Receiver, with plastic case and cable
2) Metal tube
3) Metal tube holder
4) Antenna grid
5) Elevation holder
6) Shark (2 pieces)
7) Screw: self-cutting for fastening to plastic
receiver
8) Bolt, M8x45 (2 pieces)
9) Bolt, M8x100 (4 pieces)
10) Bolt, M6x10 (3 pieces)
11) Nut, M8 (6 pieces)
12) Nut, M6 (2 pieces)
13) Split Washer, M8 big (6 pieces)
14) Washer, M8 big (6 pieces)
15) Split Washer, M6 small (2 pieces)
16) Washer, M6 small (2 pieces)
Fasten the metal tube holder (3) to the
antenna grid (4) in the following manner:
Insert the two bolts (10) through the holes
in the front of the antenna grid so that they
pass through the holes in the metal tube
holder. Onto the bolts sticking out the back
of the metal tube holder, put a washer (16),
split washer (15), and fasten with the nut
(12).
Put the cable of the receiver (1) through the
end of the metal tube (2) which has
a small hole, and make the cable go out the
other end of the metal tube. Orient the
plastic receiver so that you can see the small
hole in the plastic receiver through the
small hole in the metal tube. Fasten through
the hole with the self-cutting screw (7).
9
13
1
2
4
8
6
5
10
7
3
Obr. 1
Obr. 2
Obr. 3
11
11
12
13
14
14
15
16
3
10
1
2
4
16 15 12
7