Ferm bv • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0210/23 ferm trim saw fcd-18/140 user’s manual art.Nr. 726900 screwfix art.Nr 14286 uk subject to change document ref: fcs18-140/14286/pmr10/issue1/mar02 copyright © these instructions are the sole property of ferm-omega tools and may n...
Ferm 7 ferm trim saw fc-18/140 users manual technical specifications package contents the package contains: 1 circular saw 1 parallel guide 2 batteries 1 adapter 1 charging base 1 allen wrench 1 instruction manual 1 safety instructions 1 guarantee card check the machine, loose parts and accessories ...
6 ferm operational safety warning! Never use the machine for sawing asbe- stos. If asbestos is discovered or suspected, contact your local council for advice. The battery is normally sealed but in event of the battery being damaged be aware that it contains acid, if you get any on your skin or in yo...
Ferm 5 before using the saw ensure the battery is removed from the saw before changing blades, making adjustments or inspection. - check that the voltage marked on the charger is sui- table for use with your mains supply. - the output voltage on the charger is suitable to use with the saw battery. -...
Mounting the rip fence refer to trim saw illustration page 2. - loosen the two thumbscrews on the front of the shoe (3). - slide the rip fence (5) into slots with the fence facing downwards. - set guide to the required position. - tighten thumbscrews. Adjusting the cutting angle refer to the trim sa...
Check for damaged parts do not use a tool with damaged parts, before further use a damaged tool must be carefully checked by a qualified person to determine that it will operate properly. Check for alignment of moving parts, binding or breakage of parts, mounting and other conditions that may affect...
