1. DL manuals
  2. Ferm
  3. Saw
  4. FKZ-250
  5. User Manual

Ferm FKZ-250 User Manual

Summary of FKZ-250

  • Page 1

    Ferm bv • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0210/24 ferm 10" compound mitre saw fkz-250 user’s manual art.Nr. 727250 screwfix art.Nr. 19638 uk subject to change document ref: fkz-250/19638/pmr29/issue 1/april 02 copyright © these instructions are the sole property of ferm-omega t...

  • Page 2

    Ferm 10" compound mitre saw fkz-250 users manual technical specifications product information 1. Handgrip with switch 2. Guard unlock button 3. Motor housing 4. Protective blade guard 5. Saw head lock button 6. Extension pieces for workpiece support 7. Workpiece clamp 8. Holes for workpiece clamp 9....

  • Page 3

    10 ferm spare parts list fkz-250 ref nr description ferm nr 002/003/004/005 location plate complete 402515 030 inlay 402506 047 socket head bolt m8x35 402517 048 flange 402495 049 movable guard 402502 050 extension spring 402516 055 knob 402535 068 handle housing 402534 069 switch 402501 070 carbon ...

  • Page 4

    Ferm 9 installing and setting up the saw ensure the saw is unplugged from mains. Refer to illustration. Check package contents check contents against the list in this manual to make sure each item is present. Check for damage before assembling or using this saw check each part lis- ted is undamaged....

  • Page 5

    To adjust the head and table angles ensure the saw is unplugged from mains. Refer to the illustration page 2. The unit can saw horizontally and diagonally at any angle up 45 degrees or a combination of these. The degree scales are for indication only for accurate angles test the set angle by sawing ...

  • Page 6

    Maintence, care and repair switch off and unplug the machine before carrying out any cleaning, adjusting or changing blades. Cleaning clean the saw with a soft brush. Keep the motor ventilation slots clean. Do not use flammable liquids to clean the saw, they can damage the plastic parts and are a fi...