Ferm FTB-16/500 User Manual

Other manuals for FTB-16/500: User Manual

Summary of FTB-16/500

  • Page 1

    Ferm bv • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0210/30 ferm pillar drill machine ftb-16/500 user’s manual art.Nr. 733505 screwfix art.Nr. 34370 uk subject to change document ref: ftb-16/500/34370/pmr47/issue 1/oct 02 copyright © these instructions are the sole property of ferm-omega...

  • Page 2

    Ferm pillar drilling machine ftb-16/500 users manual spindle speeds 1. A-4 - 390 2. B-4 - 620 3. A-3 - 650 4. C-4 - 780 5. A-2 - 820 6. B-3 - 1020 7. C-2 - 1630 8. B-1 - 1830 9. C-1 - 2340 product information pillar drill parts: 1. On/off switch 2. Drill 3. Chuck guard 4. Motor 5. Depth adjustment l...

  • Page 3

    10 ferm spare parts list ftb-16/500 ferm nr description ref nr 311111 chuck 16mm - b16 001 309201 v-belt 10x478 014 309203 micro switch 020 309202 v-belt 10x456 022 309200 motor 230v 500 watt 025 311105 switch 039 311059 spring holder 043 311058 spring 044 309204 handle + globe 049 + 050 311055 eyes...

  • Page 4

    Ferm 9 avoid unintentional starting do not carry plugged in tools with your finger on the switch. Check that the switch is off before plugging in to socket. Extension cables use only three core earthed extension cables suitable for the power input of the tool (minimum cable size 1.5mm 2 ). Plug into...

  • Page 5

    Fit the depth adjustment levers • screw the three levers (5) into the boss on the left hand side of the drill head hand tight. • run idle for 15 minutes. Check the v-belt tension (see section below) - start the drill and run idle for 15 minutes to distribute the factory-applied grease throughout the...

  • Page 6

    Electrical information this product is complete with a pre-wired mains plug. If the plug needs replacing follow these instructions. Wire correctly the mains wires in this machine are coloured in the follo- wing way: blue • neutral (n) brown • live (l) earth • green/yellow (e) secure wires carefully ...