1. DL manuals
  2. Ferm
  3. Drill
  4. FTB-16
  5. User Manual

Ferm FTB-16 User Manual

Summary of FTB-16

  • Page 1

    Ferm bv • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0304-16 ferm pillar drilling machine ftb-16 user’s manual art.Nr. 733520 screwfix art.Nr. 12943 uk subject to change document ref: ftb-16/12943/pmr42/issue 1/june 02 copyright © these instructions are the sole property of ferm-omega too...

  • Page 2

    Ferm pillar drilling machine ftb-16 users manual technical specifications product information 1. On/off switch 2. Depth stop 3. Chuck guard 4. Motor 5. Depth levers 6. Column 7. Table adjustment handle 8. Belt adjustment clamp screws 9. Table 9a. Table bracket assembly 10. Rack 11. Column flange 12 ...

  • Page 3

    10 ferm spare parts list ftb-16 ref nr description ferm nr 002 rack 311108 10 arbor 311110 11 chuck 311111 28 spring-tersion 311106 29 cap-spring 311107 38 motor 311103 59 v-belt 311104 64 switch 311105 79 key-drift 311109 operational safety concentrate do not allow routine, which occurs when using ...

  • Page 4

    Ferm 9 before using the pillar drill this drill is designed for use as a pillar drill only. Do not attempt to adapt it for other purposes i.E. As a router/moulder. Ensure the drill is unplugged from mains and the drill is switched off. • the drill must be mounted on a stable surface and secured with...

  • Page 5

    Note: place some soft material (rag or cardboard) on the area/table where the drill will land to prevent the cut- ting edges being chipped by falling onto to the table or other hard surface. Fit the depth adjustment levers • screw the three levers (5) into the boss on the left hand side of the drill...

  • Page 6

    Operating the drill • plug into a suitable mains supply and switch on. • check that the chuck guard is in the down position to switch the drill on push the green button on the left hand side of the drill head in. To switch the drill off push the red button on the left hand side of drill head in. Not...