Ferm • p.O. Box 134 • 8280 ac genemuiden • nl • www.Ferm.Com 0210/22 subject to change document ref: fbj-710/17567/pmr13/issue 1/mar 02 copyright © these instructions are the sole property of ferm-omega tools and may not be reproduced ferm biscuit jointer fbj-710 user’s manual art.Nr. 726750 screwfi...
Ferm 11 ferm fbj-710 biscuit jointer users manual technical specifications package contents the package contains: 1 biscuit jointer 1 saw blade 1 wrench 1 adjustment plate 1 allen wrench 1 dust collection bag 1 instruction manual 1 safety instructions 1 guarantee card product information fig. A the ...
10 ferm carefully read this manual before using the machine. Make sure that you know how the machine functions and how to operate it. Maintain the machine in accordance with the instructions to make sure it functions properly. Keep this manual and the enclosed documentation with the machine. Ferm pr...
Ferm 9 connect a dust extraction device whenever there are facilities for fitting a dust or fume extraction system, make sure it is connected and used. Use recommended accessories the use of any other accessory or attachment other than recommended in the instructions or catalogue may pre- sent a ris...
To adjust the cutting depth referring to the illustration below. - move the motor body backwards as far as it will go, then turn the adjustment knob (7) to the required setting (see chart below). - move the motor base forwards and check that pin (a) engages in the notch. Knob marking thickness biscu...
Maintence, care and repair switch off and unplug the machine before carrying out cleaning, adjusting or changing blades. Cleaning do not use flammable liquids to clean the jointer. Faults switch off immediately at the mains plug and remove the plug when: - the plug or cable is damaged. - the switch ...
