Fernandes Nomad Deluxe Owner's Manual - Warning
Usage And Safety Precautions:
In this manual, symbols are used to highlight warnings and cautions for you to read so that
accidents can be prevented. The meanings of these symbols are as follows:
This symbol indicates explanations about
extremely dangerous matters. If users
ignore this symbol and handle the device
the wrong way, serious injury or death could
result.
Warning
Caution
This symbol indicates explanations about
dangerous matters. If users ignore this symbol
and handle the device the wrong way, bodily
injury and damage to the equipment could result.
Please observe the following safety tips and precautions
to ensure hazard-free use of the NOMAD DELUXE.
Caution
HANDLING
Warning
ABOUT POWER
* Take care that no foreign objects (coins or pins
etc.) or liquids can enter the unit. Be sure to turn
the power to all equipment off before making
connections Before moving the unit, turn the
power off, and disconnect all cables and the AC
adapter.
Since the power consumption of this unit
is fairly high, we recommend the use of
an AC adapter whenever possible. When
powering the unit from a battery, use
only an alkaline type.
ALTERATIONS
Caution
AC adapter operation
Be sure to use only an AC adapter which supplies 9V DC,
300 mA and is equipped with a center minus plug The
use of an adapter other than the specified type may
damage the unit and pose as a safety hazard.
Connect the AC adapter only to an AC outlet that
supplies the rated voltage required by the adapter.
When disconnecting the AC adapter from the AC outlet,
always grasp the adapter itself and do not pull at the
cable.
If the unit is not to be used for a long time, disconnect
the AC adapter from the outlet.
Battery Operation
Use only a 9V alkaline battery.
If the Nomad Deluxe is not to be used for an extended
period of time, remove the battery from the unit.
If battery leakage has occurred, wipe the battery
compartment and the battery terminals carefully to
remove all remnants of battery fluid. While using the
unit, the battery compartment should be closed.
Never remove the backplate of the NOMAD
DELUXE or attempt to modify the product in any
way since this can result in damage to the unit
and will void your warranty.
Usage precautions
ELECTRICAL INTERFACE
For safety considerations, the NOMAD DELUXE has been
designed to provide maximum protection against emission of
electromagnetic radiation from inside the device, and
from external interference. However, equipment that is very
susceptible to interference or that emits powerful electromagnetic
waves should not be placed near the
NOMAD DELUXE, as the possibility of interference cannot be
ruled out entirely.
Whatever the type of digital control device, the NOMAD DELUXE
included, electromagnetic damage can cause malfunctioning,
and can corrupt or destroy data. Since this is an ever-present
danger, thorough care should be taken to minimize the risk of
damage.
Caution
ENVIRONMENT
Avoid using your NOMAD DELUXE in
environments where it will be exposed to:
Extreme temperature
High humidity or moisture
Excessive dust or sand
Excessive vibration or shock.
ELECTRICAL INTERFACE
Use a soft, dry cloth to clean the NOMAD DELUXE. If necessary,
slightly moisten the cloth. Do not use abrasive cleanser, wax, or
solvents (such as paint thinner or cleaning
alcohol), since these may dull the finish or damage the surface.
Connecting cables and input and output jacks:
You should always turn off the power to the NOMAD DELUXE
and all other equipment before connecting or disconnecting any
cables. Also make sure to disconnect all cables and the AC