1. DL manuals
  2. Ferris
  3. Lawn Mower
  4. 41031301
  5. Operator's Manual

Ferris 41031301 Operator's Manual

Manual is about: IS 3100Z SERIES PRO 3 BAGGER GRASS COLLECTION SYSTEM

Summary of 41031301

  • Page 1

    Operator’s manual grass collection system assembly operation maintenance model#: 41031301 & 41031302 ferris is 3100z series mower manual part#: q0407 rev: 0 p peco peco p p p p peco peco peco pro 3 bagger.

  • Page 2: Residential Bagging System

    Residential bagging system table of contents safety 1. Read the operator’s manual carefully and familiarize yourself with the proper use of your attachment. Do not allow anyone who is not acquainted with the safety instructions to use your attachment. 2. Know the controls and how to stop quickly. Re...

  • Page 3: Safety

    3 safety warning! Never operate the mower unless the discharge guard and either the deflector assembly or the vacuum collector adapter are fastened securely in place. Warning! Do not work around the mower deck boot or the blower area until you are certain that the mower blades and the blower impelle...

  • Page 4

    Peco limited warranty for new products a. What is warranted? Peco extends the following warranties to the original purchaser of each new peco consumer product subject to the following limitations: 1. Product warranty: any part of any consumer product, which is defective in material or workmanship as...

  • Page 5: Section I

    Section i introduction & description 1-1 introduction your grass collection system has been designed to give you a low maintenance, simple, and effective way to collect the grass clippings from your mower. This manual is provided to give you the necessary instructions to properly mount and operate t...

  • Page 6

    2-3 lower stiffener installation attach the lower stiffener p#(b0611) to the left and right lower main frame legs, using (4) 3/8”-16 x 1-1/4” hhcs p#(k1192) and (4) 3/8”-16 nyloc nuts p#(k1216). Refer to figure 2-3. 2-4 exhaust deflector installation fasten the exhaust deflector p#(c0062) to the rig...

  • Page 7

    2-8 engine blower blade assembly installation position the engine/blower/blade assembly on top of the engine mount arm assembly and secure using (4) 5/16”- 18 x 1-1/2” hhcs p#(k1157) and (4) 5/16”-18 nyloc nuts p#(k1180). Refer to figure 2-8. 2-9 upper frame assembly installation note: it is recomme...

  • Page 8

    3 1 2 4 5 figure 2-13 8 2-12 blower cone installation thread (1) 5/16”-18 jam nut p#(k0120) onto each end of (2) 5/16”-18 x 2-1/2” hhcs p#(k0125). Now partially thread the bolts into each of the two tabs located on the blower housing. Place blower cone so the two tabs line up with the bolts then tig...

  • Page 9

    9 2-14 throttle cable installation to install the throttle cable kit to the rops (roll over protection system), place the 3/8” u-bolt p#(k0136) onto the rops with the threads facing the front of the mower. Next slide on the throttle mount plate assembly p#(a0666) with the rivets also facing toward t...

  • Page 10

    10 2-15 boot to mower deck installation attach the boot plate p#(b0612) to the aluminum boot p#(e2502), using (2)) 3/8”-16 x 1” carriage bolts p#(k1182), (2) 3/8” flat washer p#(k0047), and (2) 3/8”- 16 nyloc nuts p#(k1216). Insert the bolts from inside the boot, so that the threads are on the outsi...

  • Page 11

    2-20 installation/removal of collection bags to install the bag onto the bag ring, first make sure the bag ring end caps are fastened to the bag ring. Place the seam openings of the bag onto the bag ring openings and turn the bag until the slot bracket in the bag ring is protruding from the opening ...

  • Page 12

    Section iii operating instructions 3-1 general safety only qualified people familiar with this operator’s manual and the mower’s operator’s manual should operate this machine. 3-2 operation & tips on mowing a. Perform before each use maintenance list in paragraph 4-1. B. Start the engine/blower/blad...

  • Page 13

    13 model number serial number peco outdoor power equipment arden, north carolina 28704 write the model and serial number in the box above for future reference. The serial number plate is located on the plastic top assembly p#(a0551) unit model number: _____________________________ unit engine size: ...

  • Page 14

    14 exploded view of the a0551 - bagger assembly (2) k1144 - 5/16”-18 x 1” carriage bolt (6) k1142 - 5/16”-18 x 3/4” carriage bolt (4) k1010 - 1/4”-20 x 5/8” carriage bolt (1 left, 1 right) b0237 - pivot bracket (1) v1054 - inlet (1) b8002 - plastic screen (2) c0051 - long screen mount strip (2) c005...

  • Page 15

    Model#: 41031301 mower name: ferris mower model: is 3100z mower deck size: 61” vac name: 13 cubic foot pro bagger manual: q0407 for year: 2010 revised: 5.5hp briggs & stratton engine (1) engine/ blower/ blade assy. (1) hb0420 hardware bag (1) f0001 6” x 28” upper hose (1) f0001 8” x 36” lower hose (...

  • Page 16

    Model#: 41031302 mower name: ferris mower model: is 3100z mower deck size: 61” vac name: 13 cubic foot pro bagger manual: q0407 for year: 2010 revised: 6 h.P. Kohler engine (1) engine/ blower/ blade assy. (1) hb0420 hardware bag (1) f0001 6” x 28” upper hose (1) f0001 8” x 36” lower hose (4) j1000 h...

  • Page 17

    Safety decals to promote safe operation, peco supplies safety decals on all products manufactured. Damage can occur to safety decals either through shipment, use or reconditioning. Contact your local service center for replacement decals. Part #: r1054 part #: r1057 part #:r1051 17 part #: r1065 par...

  • Page 18

    18.

  • Page 19

    Notes 19.

  • Page 20: Peco

    100 airport road arden, north carolina 28704 (800) 438-5823 or (828) 684-1234 fax: (828) 684-0858 email: peco@lawnvac.Com website: www.Lawnvac.Com p peco peco p p p p peco peco peco.