Operation and maintenance manual multi-function soldering gun art. 0443 translation of the original instructions fervi.Com.
Hardware page 2 of 10 preface please ensure you have read this manual before any operation translation of the original instructions it is compulsory to read this instruction manual before starting operation. The guarantee of smooth operation and full performance of the product is highly dependent on...
Hardware page 3 of 10 contents 1 precautions with regard to electric shocks................................ 4 1.1 technical assistance .....................................................................................................4 2 description of the soldering gun and intended use .............
Hardware page 4 of 10 1 precautions with regard to electric shocks 1.1 technical assistance for any problem or request for clarification, please do not hesitate to contact the support service of the retailer from whom you purchased the product. Risks associated with electric shocks check that the ...
Hardware page 5 of 10 2 description of the soldering gun and intended use the multifunction soldering gun (art. 0443) is an device for soldering electronic circuits with tin wire. Given the possibility to modulate the operating temperature, the device can also be used for pyrography, and the welding...
Hardware page 6 of 10 2.1 technical specifications power voltage (v) / frequency (hz) 230 ac / 50 maximum power (w) 200w protection class ii soldering temperature (°c) range a: 70-200 range b: 200-350 range c: 350-500 2.2 identification plate figure 2 – identification plate fervi.Com.
Hardware page 7 of 10 3 improper use and contraindications the following is strictly prohibited! using the device on a surface that is unstable or that is susceptible to being damaged by heat or is easily flammable; resting the soldering gun in such a way that the tip touches or is close to a he...
Hardware page 8 of 10 4 how to use 4.1 switching on and off switching on and off is achieved by inserting (and removing) the plug into/from a mains socket 230 v / 50 hz. To remove the plug, hold it by the body and never pull the cord (see figure 3). Figure 3 – removing the plug 4.2 using the solderi...
Hardware page 9 of 10 5 maintenance and cleaning the purpose of this chapter is to provide all the information on maintenance procedures and the frequency required for the multifunction soldering gun. Intervention frequency daily weekly 1. General visual inspection x 2. General cleaning x 3. Mainten...
Hardware page 10 of 10 6 exploded view and spare parts ref. Description ref. Description 0443/01 soldering tip 0443/09 power cable 0443/02 holding nut 0443/10 cable inlet casing 0443/03 spacer 0443/11 cable end 0443/04 transformer 0443/12 temperature adjustment system board 0443/05 temperature adjus...
