Use and maintenance manual spray gun with fluid cup provided with bayonet lock art. A162ds translation of the original instructions fervi.Com.
Hardware page 2 of 6 preface please ensure you have read this manual before operation translation of the original instructions before starting any operation it is compulsory to read this instruction manual. The guarantee of smooth operation and full performance of the machine is highly dependent on ...
Hardware page 3 of 6 1 general safety instructions 1.1 commissioning before using this airbrush, some simple assembly is required. To properly assemble the airbrush, proceed as follows: 1. Screw on the compressed air connection and tighten it firmly using a wrench for hex nuts. Figure 1 - quick coup...
Hardware page 4 of 6 1.2 how to use the airbrush the minimum operating pressure is 0.2 – 0.3 mpa. Adjust the amount of paint and air released from the nozzle using the adjustment screws. Figure 4 – air outlet adjustments to begin painting, simply aim the airbrush at the element to be painted, keepin...
Hardware page 5 of 6 2 description and intended use the airbrush is a tool is a tool that uses compressed air to spray various types of paints. It is used for precision work, producing very thin lines, creating smooth surfaces with uniform colour, and blended tones. Figure 6 – general view of the ai...
Hardware page 6 of 6 2.2 identification the following identification plate is located on the airbrush: figure 7 – identification plate 3 improper use and contraindications it is strictly forbidden! to use the airbrush for purposes other than those for which it was intended. to use the airbrush i...
