- DL manuals
- Fervi
- Drill
- t047/230v
- User And Maintenance Manual
Fervi t047/230v User And Maintenance Manual
Summary of t047/230v
Page 1
Use and maintenance manual milling drilling machine with tapping device art. T047/230v art. T047/400v translation of the original instructions fervi.Com.
Page 2: Preface
Machines and accessories page 2 of 43 preface please ensure you have read this manual before operation translation of the original instructions reading this instruction manual is required before operating any of the machinery. The guarantee that the machine will function and perform properly is stri...
Page 3: Contents
Machines and accessories page 3 of 43 contents 1 introduction ........................................................................................ 5 2 general safety warnings ................................................................... 7 2.1 general safety rules for machine equipment........
Page 4: Fervi.Com
Machines and accessories page 4 of 43 10 troubleshooting ............................................................................. 34 11 disposal of components and materials...................................... 35 12 electrical circuit ..............................................................
Page 5: 1 Introduction
Machines and accessories page 5 of 43 1 introduction this manual is considered an integral part of the machine it was attached to at the time of purchase. The manufacturer holds all ownership to material and intellectual property of this manual; any disclosure or copying, even partial, of this publi...
Page 6: Attention
Machines and accessories page 6 of 43 attention this highlights behavioural rules to prevent damage to the machine and/or the occurrence of dangerous situations. Residual risks this highlights the presence of dangers that cause residual risks to which the operator must pay attention in order to avoi...
Page 7: 2 General Safety Warnings
Machines and accessories page 7 of 43 figure 1 - overall view 2 general safety warnings 2.1 general safety rules for machine equipment accident the operation of drilling or tapping always presents a risk of injury associated with the possibility of accidental contact of parts of the body with the ...
Page 8: Operator Protection
Machines and accessories page 8 of 43 to avoid damage to persons, to the property or to the machine itself. please use the machine only for its expected uses (drilling or tapping). don't tamper with the safety devices equipping the machine. Operator protection before starting any work on the mac...
Page 9: Fervi.Com
Machines and accessories page 9 of 43 the tool is replaced; it is being moved or transported; cleaning. 23. It is recommended that users of this publication, for maintenance and repair, have a basic knowledge of the mechanical principles and procedures inherent in repair technique. 24. The com...
Page 10: Tools
Machines and accessories page 10 of 43 2.2 safety regulations regarding the electric system of machine- tools risks associated with using the machine 1. Do not modify the electrical system in any way. Any attempt in this regard may jeopardize the operation of electrical devices, causing malfunction ...
Page 11: 3 Technical Specifications
Machines and accessories page 11 of 43 3 technical specifications s iz e height (mm) 1960 width (mm) 740 depth (mm) 790 m a s se s net mass (kg) 380 gross mass (kg) 390 p o w e r su p p ly rated voltage (v) 230 - 400 frequency (hz) 50 power (w) 1500 g e n e ra l c h a ra ct e ri st ic s drilling cap...
Page 12: Machine
Machines and accessories page 12 of 43 4 intended use and description of the machine milling drilling machines (art. T047) are machine-tools designed for executing some simple mechanical operations, such as: drilling (max drilling capacity: 32 mm for steel); tapping; milling. The machine is ma...
Page 13: Fervi.Com
Machines and accessories page 13 of 43 4.2 main units of the milling drilling machine figure 2 - overview of the machine. 1. Speed controller; 2. Handwheel for slow feed with calibrated depth; 3. Spindle protection device (interlocked guard) 4. Handwheel for calibrated transverse feed; 5. Electric m...
Page 14: 4.3 Identification Plate
Machines and accessories page 14 of 43 4.3 identification plate on the machine, the identification plate is located on the side of the head (see figure below). Figure 3 – ce plate. 4.4 plates and pictograms 4.4.1 plates on the side of the machine on the left side of the machine, near the main switch...
Page 15: Fervi.Com
Machines and accessories page 15 of 43 4.4.2 plates and pictograms t047/230v figure 5 - pictograms t047/400v60 -please read the instructions before using the machine -before carrying out any adjustment or maintenance on the machine, detach its plug from the power supply socket. -before operating, se...
Page 16: Attenzione
Machines and accessories page 16 of 43 plate in italian plate in english -leggere attentamente le istruzioni prima di utilizzare la macchina -prima di intervenire sulla macchina per qualsiasi regolazione o per manutenzione togliere la spina dalla presa di corrente -fissare saldamente alla tavola il ...
Page 17: Adjusting The Speed
Machines and accessories page 17 of 43 4.4.3 spindle speed plates the plate indicating of the speed of rotation of the spindle corresponding to different gearbox configurations is on the front part of the head (figure 6). Figure 6 - spindle speed change plate, respectively 230v, 400v adjusting the s...
Page 18: Fervi.Com
Machines and accessories page 18 of 43 5 switches and control levers 5.1 control buttons and indicator lights at the front part of the milling drilling machine (t047), on the left of head and spindle there is the following control panel. Figure 7 - drill control panel t047 400v. A. Power indicator l...
Page 19: Risk Of Injury
Machines and accessories page 19 of 43 c. Green start switch (clockwise rotation) when pressed, the clockwise rotation of the spindle will start. Risk of injury before starting the drill, make sure all guards are properly in place. D. Green start switch (anticlockwise rotation) when pressed, the ant...
Page 20: Adjusting The Speed
Machines and accessories page 20 of 43 5.2 commands for adjusting the speed of the spindle to adjust the speed of rotation of the spindle, use the controls located at the front of the head, and in particular: the levers (ref. G and h in figure 8) for speed change with gears; the rotary selector ...
Page 21: Fervi.Com
Machines and accessories page 21 of 43 5.3 spider for vertical displacement of the spindle on the right hand side of the head there is a spider for vertical (upward or downward) displacement of the spindle (figure 9). To lower the spindle, i.E. Move it closer to the work piece, use one of three knob...
Page 22: Fervi.Com
Machines and accessories page 22 of 43 to switch between fast feed and calibrated feed, it is necessary to use the knob at the centre of the quick feed spider of the spindle (figure 11). Figure 11 feed selection knob. This adjustment is useful to establish a reference point for the operation phase, ...
Page 23: Changing The Table Height
Machines and accessories page 23 of 43 to adjust the table height, proceed as follows: 1. Unlock the locking levers; 2. Hold the handle and turn it clockwise for raising the table, or anticlockwise for lowering it; 3. Tighten the lock nuts. Changing the table height it is absolutely forbidden to cha...
Page 24: 5.5 Adjusting The Head
Machines and accessories page 24 of 43 5.5 adjusting the head 5.5.1 head height adjustment handle on these drills it is possible to adjust the head height this feature is afforded by a rack on the bearing column of the machine. Head height is adjustable manually by means of: a handle located on th...
Page 25: Changing The Head Tilt
Machines and accessories page 25 of 43 5.5.2 nuts and graduated scale for adjusting the inclination of the head loosen the lock nuts on the sides of the head (ref. N in figure 16) using the hex wrench supplied, then tilt the head lock controlling the tilt of the graduated scale (ref. O) located betw...
Page 26: 6 Machine Safety Devices
Machines and accessories page 26 of 43 6 machine safety devices 6.1 grounding in case of malfunction or breakdown, grounding provides a path of least resistance for the electrical current that reduces the danger of electrical shock. The machine is equipped with a power cord with ground conductor. Th...
Page 27: 6.2 Safety Devices
Machines and accessories page 27 of 43 6.2 safety devices 6.2.1 interlocking moveable guard this device prevents contact between the operator and the moving spindle while the drill is operating. Figure 19 spindle movable guard. Checking the safety devices always check the proper functioning of the i...
Page 28: 7.1 Transport
Machines and accessories page 28 of 43 7 transport and installation 7.1 transport given the considerable size of the package (720 x 820 x 1830 mm) and its weight (400 kg approx.) it is necessary to use a suitable means of transport such as a truck allowing loading/unloading to occur smoothly with fo...
Page 29: 7.4 Commissioning
Machines and accessories page 29 of 43 7.2 mechanical installation 1. Place the machine on a hard strong floor to prevent vibration and/or loss of stability during processing. 2. Make 4 mounting holes on the floor, with spacings equal to those of the mounting holes on the machine base (figure 21). F...
Page 30: 8 Operation
Machines and accessories page 30 of 43 8 operation the milling drilling machine t047 is a very easy machine to use. It can be used to carry out milling and drilling of metals. Machine operation the milling drilling machine should be used only with tools for precision machining of metals. Risk of cru...
Page 31: Fervi.Com
Machines and accessories page 31 of 43 8.1.1 mounting the tool for milling insert the tool holder piston rod and tighten the spindle in the following way: 1. Open the spindle's protective guard (ref. Iii in figure 22); 2. Remove any tools from the drill's spindle; 3. Remove the drill's spindle; 4. R...
Page 32: Risk Of Injury
Machines and accessories page 32 of 43 8.2 preparation for drilling attach a clamp or similar device for gripping the workpiece on the work table. mount the piece on the gripping device, taking care to verify it is securely and safely attached. Risk of injury the workpiece must be firmly fixed...
Page 33: 9 Maintenance
Machines and accessories page 33 of 43 9 maintenance 9.1 routine maintenance with compressed air, routinely blow away the dust that accumulates inside the motor and the pieces of metal remaining on the table and on the tip. Every 50 hours or every 5 days lubricate the speed change gear mechanism, th...
Page 34: 10 Troubleshooting
Machines and accessories page 34 of 43 10 troubleshooting problem probable cause solution noisy operation a) dry spindle b) broken bearing c) incorrect adjustment of the spindle for boring d) noisy motor a) disassemble the spindle unit and lubricate. B) replace the bearing c) adjust the component d)...
Page 35: Respect The Environment!
Machines and accessories page 35 of 43 11 disposal of components and materials the milling drilling machine is made of plastic and metal, when scrapping disassemble and separate the materials, then hand them over to environmental professionals specialized in the disposal and recycling of the differe...
Page 36: 12 Electrical Circuit
Machines and accessories page 36 of 43 12 electrical circuit t047/230v: t047/400v: fervi.Com.
Page 37: Fervi.Com
Machines and accessories page 37 of 43 12.1wiring diagram of the control panel fervi.Com.
Page 38: 13 Parts Of The Machine
Machines and accessories page 38 of 43 13 parts of the machine fervi.Com.
Page 39: Fervi.Com
Machines and accessories page 39 of 43 13.1description of parts for t047/230v and t047/400v table 41 part no. Description part no. Description t047/errore. Nome della proprietà del documento sconosciuto.41 /001 cap t047/errore. Nome della proprietà del documento sconosciuto.41 /030 gear t047/errore....
Page 40: Fervi.Com
Machines and accessories page 40 of 43 t047/errore. Nome della proprietà del documento sconosciuto.41 /008 gasket t047/errore. Nome della proprietà del documento sconosciuto.41 /037 oil cap t047/errore. Nome della proprietà del documento sconosciuto.41 /009 retaining ring t047/errore. Nome della pro...
Page 41: Fervi.Com
Machines and accessories page 41 of 43 documento sconosciuto.41 /017 documento sconosciuto.41 /045 t047/errore. Nome della proprietà del documento sconosciuto.41 /018 steel ball t047/errore. Nome della proprietà del documento sconosciuto.41 /046 bolt t047/errore. Nome della proprietà del documento s...
Page 42: Fervi.Com
Machines and accessories page 42 of 43 t047/errore. Nome della proprietà del documento sconosciuto.41 /026 retaining ring t047/errore. Nome della proprietà del documento sconosciuto.41 /055 nut t047/errore. Nome della proprietà del documento sconosciuto.41 /027 gear t047/errore. Nome della proprietà...
Page 43: Fervi.Com
Machines and accessories page 43 of 43 /062 /090 t047/errore. Nome della proprietà del documento sconosciuto.41 /063 head t047/errore. Nome della proprietà del documento sconosciuto.41 /091 micrometer t047/errore. Nome della proprietà del documento sconosciuto.41 /064 washer t047/errore. Nome della ...
Page 44: Fervi.Com
Machines and accessories page 44 of 44 nome della proprietà del documento sconosciuto.41 /072 nome della proprietà del documento sconosciuto.41 /099 t047/errore. Nome della proprietà del documento sconosciuto.41 /073 lip seal t047/errore. Nome della proprietà del documento sconosciuto.41 /100 screw ...
Page 45: Fervi.Com
Machines and accessories page 45 of 45 sconosciuto.41 /080 sconosciuto.41 /107 t047/errore. Nome della proprietà del documento sconosciuto.41 /081 nut t047/errore. Nome della proprietà del documento sconosciuto.41 /108 screw t047/errore. Nome della proprietà del documento sconosciuto.41 /082 locking...
Page 46: Fervi.Com
Machines and accessories page 46 of 46 t047/errore. Nome della proprietà del documento sconosciuto.41 /115 fixed collar t047/errore. Nome della proprietà del documento sconosciuto.41 /132 lock t047/errore. Nome della proprietà del documento sconosciuto.41 /116 locking handle t047/errore. Nome della ...
Page 47: Fervi.Com
Machines and accessories page 47 of 47 documento sconosciuto.41 /124 documento sconosciuto.41 /141 t047/errore. Nome della proprietà del documento sconosciuto.41 /125 plug t047/errore. Nome della proprietà del documento sconosciuto.41 /142 t047/errore. Nome della proprietà del documento sconosciuto....
Page 48: Fervi.Com
Machines and accessories page 48 of 48 fervi.Com.
Page 49: Fervi.Com
Machines and accessories page 49 of 49 13.2description of parts for t047/230v and t047/400v table 45 part no. Description part no. Description t047/errore. Nome della proprietà del documento sconosciuto.4 5/01 screw t047/errore. Nome della proprietà del documento sconosciuto.4 5/31 gears support t04...
Page 50: Fervi.Com
Machines and accessories page 50 of 50 part no. Description part no. Description t047/errore. Nome della proprietà del documento sconosciuto.4 5/09 guide ring lock t047/errore. Nome della proprietà del documento sconosciuto.4 5/39 threaded guide t047/errore. Nome della proprietà del documento sconos...
Page 51: Fervi.Com
Machines and accessories page 51 of 51 part no. Description part no. Description proprietà del documento sconosciuto.4 5/17 proprietà del documento sconosciuto.4 5/47 t047/errore. Nome della proprietà del documento sconosciuto.4 5/18 screw t047/errore. Nome della proprietà del documento sconosciuto....
Page 52: Fervi.Com
Machines and accessories page 52 of 52 part no. Description part no. Description sconosciuto.4 5/25 sconosciuto.4 5/62 t047/errore. Nome della proprietà del documento sconosciuto.4 5/26 table support t047/errore. Nome della proprietà del documento sconosciuto.4 5/63 bearing t047/errore. Nome della p...