Festina IFM0S04 Instruction Manual - page 8
IFM0S04
IFM0S04
14
15
English
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to
maximum of 4 hours 59 minutes 59 seconds.
The chronograph second hand keeps continuously for 4 hours 59 minutes 59 seconds
after starting.
[Measuring time with the chronograph]
1.
The chronograph can be started and stopped each time button “A” is pressed.
2.
Pressing button “B” resets the chronograph and the chronograph second hand,
chronograph minute hand, and chronograph hour hand return to zero position.
RESET
STOP
TIME
MEASUREMENT
CHRONOGRAPH RESET
(incl. After replacing battery)
1.
Pull the crown out to the 2nd position.
2.
Press button “A” to set the chronograph second hand to zero position.
The chronograph hand can be advanced rapidly by continuously pressing
button “A”.
* The chronograph hour and minutes hands are syncronized with
chronograph second hand.
* The chronograph second hand can be advanced one scale by pressing
button “A” once.
* The chronograph second hand can be advanced rapidly by continuously
pressing button “A”.
3.
Once the hand have been reset to zero position, push the crown back to the
normal position.
* Do not return crown to normal position while chronograph second hand
returns to 12:00 (ZERO) position.
Hand stops on the way when crown is returned to normal position and these
positions are recognized as 12:00 (ZERO) position.
This procedure should be performed when the chronograph second hand does not
return to zero position after the chronograph has been reset, and including after the
battery has been replaced.