1. DL manuals
  2. Festool
  3. Saw
  4. Carvex PS 420 EBQ
  5. Original Operating Manual

Festool Carvex PS 420 EBQ Original Operating Manual

Other manuals for Carvex PS 420 EBQ: Instruction Manual

Summary of Carvex PS 420 EBQ

  • Page 1

    703761_003 festool group gmbh & co. Kg wertstraße 20 d-73240 wendlingen tel.: +49 (0)7024/804-0 telefax: +49 (0)7024/804-20608 www.Festool.Com originalbetriebsanleitung 6 original operating manual 13 notice d’utilisation d’origine 19 manual de instrucciones original 26 istruzioni per l'uso originali...

  • Page 2

    2 1-1 1-10 1-11 1-12 1-13 1-10 1-11 1-12 1-13 1-9 1-6 1-7 1-8 1-9 1-7 1-8 1-2 1-1 1-2 1-5 1 1-5 1-3 1-4 ps 420 ebq psb 420 ebq.

  • Page 3

    1. 2. Ca. 3 mm 3-1 3-2 3-3 3-4 3-5 3-6 3 4-2 4-1 4 + -.

  • Page 4

    6 6-1 7-1 5-3 5-1 5-2 5 7 7-2.

  • Page 5

    8 8-1 10-2 10-3 10-4 10-5 10-1 9 10 max. 20 mm l + s 105/4 fsg fsg adt-ps 400 ks-ps 400

  • Page 6

    C a r v e x 13 gb original operating manual 1 symbols 2 machine features the specified illustrations appear at the beginning of the operating instructions. 3 intended use jigsaws are designed for sawing wood and similar materials similar to wood. With the special saw blades offered by festool, these...

  • Page 7

    14 c a r v e x gb 5 safety instructions 5.1 general safety instructions warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future ref- erence. The ter...

  • Page 8

    C a r v e x 15 gb increase possible for other applications, with other insertion tools or if not maintained adequately. Take note of idling and downtimes of machine! 6 operation connecting and detaching the mains power cable [1-7] see fig. [2]. Insert the plug into a socket. The electric power tool ...

  • Page 9

    16 c a r v e x gb saw blade, switch on the jigsaw, on a level surface, slide in the splinterguard (not using your hand!)while the machine is op- erating until it is flush with the front edge of the saw base (speed setting 5). This beds in the splinterguard.  when it is worn, push the splinterguard ...

  • Page 10

    C a r v e x 17 gb free saw guidance along a scribe mark the triangular pointer on the splinterguard [4-1] indicates the cutting line of the saw blade. This fa- cilitates sawing along a scribe mark. 8.1 lighting a continuous light or stroboscope is installed for il- luminating the cutting line: up to...

  • Page 11

    18 c a r v e x gb ensure that the angle table is firmly seated in the guide. Setting the angle turn the adjusting wheel [7-1] to select the re- quired angle. You can select the angles -45°, 0° and +45° on the scale [7-2] .  for 90° cuts, we recommend setting the angle table to a small negative angl...