1. DL manuals
  2. Festool
  3. Power Tool
  4. DOMINO DF 500 Q
  5. Operating Instructions Manual

Festool DOMINO DF 500 Q Operating Instructions Manual

Other manuals for DOMINO DF 500 Q: Original Operating Manual
Manual is about: Dowel jointer

Summary of DOMINO DF 500 Q

  • Page 1

    468 063_006 festool gmbh wertstraße 20 d-73240 wendlingen tel.: 07024/804-0 telefax: 07024/804-608 http://www.Festool.Com domino df 500 q bedienungsanleitung/ersatzteilliste*) 5 - 8 operating instructions/spare parts list*) 9 - 12 mode d’emploi/liste de pièces de rechange*) 13 - 16 instrucciones de ...

  • Page 2

    1.7 1.8 1.5 1.6 1.1 1.3 1.2 1.4 2.4 2.2 2.1 2.3 1 2 3 60° 70° 80° 10° 0° 20° 30° 45° 4036 28 12 15 20 25 28 seen at ideal tools..

  • Page 3

    Seen at ideal tools..

  • Page 4

    Seen at ideal tools..

  • Page 5

    9 table of contents 1 introduction 2 technical data 3 pictograms 4 intended use 5 safety instructions 5.1 general safety rules 5.2 tool-specifi c safety rules 5.3 noise and vibration information 6 control elements 7 power supply and start-up 8 machine settings 8.1 changing tools 8.2 adjusting the mil...

  • Page 6

    10 7 power supply and start-up the mains voltage must correspond to the specifi cation on the rating plate. Always switch the machine off before connecting or disconnecting the mains lead! See fig. 2 for connection and disconnection of the power cable. To switch on, push the switch (1.1) forwards unt...

  • Page 7

    11 9 working with the machine prior to processing the fi nal workpiece, it is ad- visable to optimise the dowel-hole depth, width and diameter using a sample workpiece. Please observe the following rules when working: - always secure the workpiece in such a manner that it cannot move while being sawe...

  • Page 8

    12 14 fault correction (the following images b1 to b6 are on a separate enclosed sheet). Fault cause adjustment b1 burns blunt jointer bit use sharp jointer bit b2 expansion of dowel hole jointing depth excessive (gre- ater than 20 mm) with 5 mm jointing bit reduce jointing depth b3 dowel penetrates...

  • Page 9

    Ce-konformitetserklæring. Vi erklærer på eget ansvar at dette produktet er i overensstemmelse med følgen- de normer eller normative dokumenter: en 60 745, en 55 014, en 61 000 i henhold til bestemmelsene i direk- tivene 98/37/ef, 89/336/eØf. Eg-konformitätserklärung. Wir erklären in alleini- ger ver...