1. DL manuals
  2. Festool
  3. Sander
  4. ES 150/3 EQ
  5. Operating Instructions Manual

Festool ES 150/3 EQ Operating Instructions Manual

Other manuals for ES 150/3 EQ: Instruction Manual

Summary of ES 150/3 EQ

  • Page 1

    Es 150/3 eq es 150/5 eq bedienungsanleitung exzenterschleifer 4 - 6 operating instructions eccentric sander 7 - 9 mode d’emploi ponceuse excentrique 10 - 12 instrucciones de servicio lijadora excéntrica 13 - 15 istruzioni d’uso levigatrice orbitale 16 - 18 gebruiksaanwijzing excenterschuurmachine 19...

  • Page 2

    Ce-konformitetserklæring. Vi erklærer på eget ansvar at dette produktet er i overensstemmelse med følgende normer eller normative dokumenter: en 50 144, en 55 014, en 61 000 i henhold til bestemmelsene i direktivene 73/23/eØf, 98/37/ef, 89/336/eØf. Eg-konformitätserklärung. Wir erklären in alleinige...

  • Page 3

    Seen at ideal tools..

  • Page 4

    7 1 before using sander 1.1 safety instructions read the safety instructions on the attached sheet before using the sander. Always wear protective goggles because of possible dangers when sanding. The manufacturer’s handling and processing instructions must be observed without fail if explosive or s...

  • Page 5

    8 the sanding dust is extracted through suction openings in the sanding base (1.13) and trapped in the turbo-filter (1.5). The turbo-filter has to be changed when it is so full of dust that the extraction power diminishes. Inserting a turbo-filter - push the front cardboard section of the tur- bo-fi...

  • Page 6

    9 8 sanding base brakes the sanding base is braked by a collar (2.2) in order to prevent any uncontrolled excessive speed of the sanding base. Because the collar wears down in the course of time, it has to be replaced by a new one (order no. 453 388) as soon as there is any reduction in the braking ...

  • Page 7

    Festool gmbh postfach 1163 d-73236 wendlingen wertstraße 20 d-73240 wendlingen ) (07024) 804-0 fax (07024) 804-608 http://www.Festool.Com seen at ideal tools..