1. DL manuals
  2. Festool
  3. Sander
  4. ETS 150/3 EQ
  5. Operating Instructions Manual

Festool ETS 150/3 EQ Operating Instructions Manual

Summary of ETS 150/3 EQ

  • Page 1

    Ets 150/3 eq ets 150/5 eq bedienungsanleitung exzenterschleifer 4 - 6 operating instructions eccentric sander 7 - 9 mode d’emploi ponceuse excentrique 10 - 12 instrucciones de servicio lijadora excéntrica 13 - 15 istruzioni d’uso levigatrice orbitale 16 - 18 gebruiksaanwijzing excenterschuurmachine ...

  • Page 2

    Ce-konformitetserklæring. Vi erklærer på eget ansvar at dette produktet er i overensstemmelse med følgende normer eller normative dokumenter: en 50 144, en 55 014, en 61 000 i henhold til bestemmelsene i direktivene 98/37/ef, 89/336/eØf. Eg-konformitätserklärung. Wir erklären in alleiniger verantwor...

  • Page 3

    Seen at ideal tools..

  • Page 4

    7 1 before using sander 1.1 safety instructions read the safety instructions on the attached sheet before using the sander. Always wear protective goggles because of possible dangers when sanding. The manufacturer’s handling and processing instructions must be observed without fail if explosive or s...

  • Page 5

    8 inserting a turbo-filter - push the front cardboard section of the tur- bo-filter with the sealing lip (1.4) onto the extraction nozzle (1.9) of the filter holder - insert rear cardboard section with slot (1.6) onto the retaining strip (1.7) of the filter hol- der - push the filter holder with its...

  • Page 6

    9 8 sanding base brakes the sanding base is braked by a collar (2.2) in order to prevent any uncontrolled excessive speed of the sanding base. Because the collar wears down in the course of time, it has to be replaced by a new one (order no. 453 388) as soon as there is any reduction in the braking ...

  • Page 7

    Festool gmbh postfach 1163 d-73236 wendlingen wertstraße 20 d-73240 wendlingen ) (07024) 804-0 fax (07024) 804-608 http://www.Festool.Com seen at ideal tools..