1. DL manuals
  2. Festool
  3. Tools
  4. PS 400 EBQ
  5. Operating Manual

Festool PS 400 EBQ Operating Manual

Manual is about: fretsaw

Summary of PS 400 EBQ

  • Page 1

    47 7219_0 09 originalbetriebsanleitung/ersatzteilliste 6 original operating manual/spare parts list 14 notice d’utilisation d’origine/liste de pièces de rechange 21 manual de instrucciones original/lista de piezas de repuesto 29 istruzioni per l'uso originali/elenco parti di ricambio 37 originele ge...

  • Page 2

    2 1-1 1-10 1-11 1-12 1-13 1-10 1-11 1-12 1-13 1-9 1-6 1-7 1-8 1-9 1-7 1-8 1-2 1-1 1-2 1-5 1 1-5 1-3 1-4 ps 400 ebq psb 400 ebq.

  • Page 3

    1. 2. Ca. 3 mm 5-3 5-1 5-2 5 3-1 3-2 3-3 3-4 3 4-2 4-1 4.

  • Page 4

    A b c 7 6 6-1 7-1 7-2.

  • Page 5

    8 8-1 10-2 10-3 10-4 10-5 10-1 9 10

  • Page 6

    14 carvex gb original operating manual the specified illustrations appear at the begin- ning of the operating instructions. 1 symbols 2 machine features 3 intended use jigsaws are designed for sawing wood and similar materials similar to wood. With the special saw blades offered by festool, these ma...

  • Page 7

    Carvex 15 gb 5 safety instructions 5.1 general safety instructions warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for fu- ture reference. The term "po...

  • Page 8

    16 carvex gb the emission values specified (vibration, noise) were measured in accordance with the test conditions stipulated in en 60745 and are intended for machine comparisons. They are also used for making preliminary estimates re- garding vibration and noise loads during oper- ation. The emissi...

  • Page 9

    Carvex 17 gb ejecting saw blade l when ejecting the saw blade, hold the elec- tric power tool such that no persons or an- imals can be injured. X push the saw blade ejection [3-3] forwards as far as the stop. If the saw blade is not ejected: run jigsaw 3 - 10 seconds at a high speed. Actuate saw bla...

  • Page 10

    18 carvex gb in position a, the automatic load detection is activated: the stroke speed is reduced in idling and is controlled to the highest value when the blade enters the workpiece. 8 working with the machine when working on small or thin workpieces, al- ways use a stable base, or the cms module ...

  • Page 11

    Carvex 19 gb cessories and consumable material from other suppliers will most likely affect the quality of your working results and limit any warranty claims. Machine wear or your own personal workload may increase depending on the ap- plication. Protect yourself and your machine, and preserve your ...

  • Page 12

    20 carvex gb x set the pendulum stroke [1-12] to 0 - 1. X set the stroke rate [1-5] to 1 - 5. L store the centring mandrel in the depot [10-3] . Semi-stationary sawing with the festool cms system when combined with the festool cms system, the jigsaw becomes a semi-stationary bench saw for profiled c...