Festool Trion PS 300 EQ Instruction Manual

Manual is about: Festool Jigsaw Instruction Manual

Summary of Trion PS 300 EQ

  • Page 1

    1 ps 300 eq trion psb 300 eq trion instruction manual important: read and understand all instructions before using. 451 828 _002 pendulum jigsaw scie sauteuse pendulaire sierra caladora guide d’utilisation important: assurez-vous de lire et de bien comprendre toutes les instructions avant l’utilisat...

  • Page 2

    2 general safety rules warning! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Save these instructions work area 1 keep your work area clean and well lit. Cluttered benches and dark areas invite...

  • Page 3

    4 12 remove any adjusting keys or tools before turning the tool on. A wrench or key that is left attached to a moving part of the tool may result in personal injury. 13 do not overreach. Stand on both feet and keep proper footing and balance at all times. Proper footing and balance enable better con...

  • Page 4

    6 technical data ps 300 eq / psb 300 eq wattage: 720 w no load speed: 1 000 – 2 900 spm stroke length: 26 mm pendulum stroke: 3 stages bevel adjustment: 45° to both sides cutting depth (depending on saw blade) wood: 120 mm aluminium: 20 mm steel: 10 mm weight: 2.3 kg / 2.4 kg safety standard: / ii a...

  • Page 5

    8 metalworking take the following safety precautions when cutting metals: - connect a residual current operated device in series before the tool, - connect tool to a suitable dust extractor, - clean tool regularly of dust accumulations in the motor housing. Extension cord if an extension power cord ...

  • Page 6

    10 adjusting the base runner the base runner can be swiveled to both sides by up to 45° for bevel cuts: - turn off and unplug tool. - remove chip guard and splinterguard. - release locking screw (5.1) with allen key. - push base runner approx. 5 mm (just under 1/4”) forwards. - set desired inclinati...

  • Page 7

    12 adjusting the sawblade guide these pendulum jigsaws have an additional carbide guide (9.3) immediately above the workpiece for better blade guidance. - turn off and unplug tool. - tighten the screw (9.2) with the allen key (9.1) until the jaws almost rest against the sawblade. The sawblade must s...

  • Page 8

    14 other accessories, saw blades festool offers sawblades which are ideally matched to your festool jigsaw and application, to ensure quick and clean cuts in a variety of materials. The order numbers for these sawblades as well as for all other accessories can be found in your festool catalog. Acces...

  • Page 9

    16 warranty conditions of 1+2 warranty you are entitled to a free extended warranty (1 year + 2 years = 3 years) for your festool power tool. Festool shall be responsible for all shipping costs during the first year of the warranty. During the second and third year of the warranty the customer is re...