Festool TS 75 EBQ Original Operating Manual - page 14

14

Technical data 

TS 75 EBQ/ TS 75 EQ

Power  

1600 W

  (110 V-Version 

13 A)

Speed (idling) 

1350 - 3550 rpm

Inclination 

0° - 47°

Cutting depth at 0° 

0 – 75 mm

Cutting depth at 45° 

0 – 56 mm

Saw blade dimensions 

210x2.4x30 mm

Weight 6.2 

kg

Degree of protection 

/II

The specifi ed illustrations can be found at the 

beginning of the operating instructions.

Symbols 

  Warning of general danger

   Manual, read the instructions.

  Wear ear protection!

  Wear protective goggles.

1 

Use for intended purpose

These machines are intended to be used for 

sawing wood, wood-like materials, plaster and 

cement-bonded fibre materials, and plastics. 

With the special saw blades for aluminium offered 

by Festool, these machines can also be used for 

sawing aluminium. 

Only saw blades with the following specifi cations 

must be used: saw blade diameter of 210 mm; 

cutting width of 2.4 mm to 2.6 mm; toolholder 

diameter of 30 mm; blade core thickness of max. 

1.8 mm; suitable for speeds of up to 5000  rpm. 

Do not use any abrasive wheel.

Festool electric power tools should only be in-

stalled in work benches specially designed by Fes-

tool. The electric power tool may become unsafe 

and cause serious accident if installed in benches 

from other manufacturers or self-manufactured 

work benches.

  The user is liable for damage and injury 

resulting from incorrect usage!

2  

Safety instructions

2.1 

General safety rules

  WARNING! Read all safety warnings and 

all instructions.

Failure to follow the warnings and instructions 

may result in electric shock, fi re and/or serious 

injury.

Save all warnings and instructions for future 

reference.

The term „power tool“ in the warnings refers 

to your mains-operated (corded) power tool or 

battery-operated (cordless) power tool.

2.2  

Tool-specifi c safety rules

1) Cutting 

procedures

a) 

DANGER: Keep hands away from cutting 

area and the blade. Keep your second hand 

on auxiliary handle, or motor housing. If both 

hands are holding the saw, they cannot be cut 

by the blade. 

b) Do not reach underneath the workpiece. The 

guard cannot protect you from the blade below 

the workpiece. 

c)  Adjust the cutting depth to the thickness of the 

workpiece. Less than a full tooth of the blade 

teeth should be visible below the workpiece. 

d) Never hold piece being cut in your hands or 

across your leg. Secure the workpiece to a 

stable platform. It is important to support 

the work properly to minimize body exposure, 

blade binding, or loss of control. 

e)  Hold power tool by insulated gripping sur-

faces when performing an operation where 

the cutting tool may contact hidden wiring 

or its own cord. Contact with a „live“ wire will 

also make exposed metal parts of the power 

tool „live“ and shock the operator. 

f)  When ripping always use a rip fence or straight 

edge guide. This improves the accuracy of cut 

and reduces the chance of blade binding. 

g) Always use blades with correct size and shape 

(diamond versus round) of arbour holes. 

Blades that do not match the mounting hard-

ware of the saw will run eccentrically, causing 

loss of control. 

h) Never use damaged or incorrect blade wash-

ers or bolt. The blade washers and bolt where 

specially designed for your saw, for optimum 

performance and safety of operation. 

i)  Wear suitable protection such as 

  ear protection, safety goggles, a 

dust mask for work which gener-

ates dust, and protective gloves 

when working with raw materials 

and when changing tools.

Circular saw TS 75 EBQ/ TS 75 EQ