Fetco CBS-2031S User Manual - Service And Support

13 

CSD

SPRAY PLATE 

Service and Support 

For service and support information, contact the Technical Support department. Our hours are 7:00 AM to 6:00 PM 

Central Time, Monday through Friday. 

Phone: (800) 338-2699 or (847) 719-3000 

 Email: 

techsupport@fetco.com 

Utilize only qualified beverage equipment service technicians for service.  A Service Company Directory may be 

found on our web site, http://www.fetco.com. 

Cleaning & Maintenance 

Daily: Wipe the area above the brew basket to remove coffee residue. 

Daily or Weekly: 

CSD Versions: 

Clean the Cascading Spray Dome (CSD) with a soft brush and detergent. 

It may also be cleaned in a dishwasher – top rack only. 

The CSD is held in place by four magnets. To remove it, grasp the bottom 

and pull down. 

Spray Plate Versions: 

The spray plate should be removed and cleaned to remove hard 

water deposits.  In areas with extremely hard water, it may be 

necessary to do this daily.  Weekly cleaning may be sufficient in some 

areas.  

When cleaning the spray plate, make sure that each hole is 

completely free of mineral deposits.  Use a toothpick to clean out 

each hole.  Never use metal objects or abrasives on the spray plate’s 

Teflon coating. 

Quarterly: 

x  Check water temperature, adjust if necessary. 

x  Check brew levels, adjust if necessary. 

x  Inspect all fittings and hoses for leaks. 

x  Inspect inside of tank for lime deposits. De-lime tank and probes if necessary. This procedure should be 

done by a qualified service technician.