Fetco CBS-2131 XTS User Manual

Other manuals for CBS-2131 XTS: User Manual, Specifications, User Manual

Summary of CBS-2131 XTS

  • Page 1

    Fetco®, luxus®, extractor®, intermittent brew, driven to innovate, xts are trademarks or trade names of food equipment technologies company. U.S. Patent 7,866,255 7,631,593 6,889,598 6,772,676 6,576,282 6,571,685 6,565,906 6,705,208 6,148,717 6,713,109 & other patents are pending © 2013 food equipme...

  • Page 2: Index:

    2 index: contact information........................................................ 2 description & features .................................................. 2 technical data ............................................................... 2 requirements...............................................

  • Page 4: Contact Information

    2 contact information description & features the cbs-2130xts series coffee brewers feature our universal spray over technology, which works like this: the following variables are programmed for each batch size: brew volume prewet percent (percentage of the brew volume) brew time prewet delay (the ti...

  • Page 5: Specifications-North America

    3 weights capacities and measurements weights and capacities & measurements; 3 liter&1 gallon single and dual brewers brewer height width depth empty weight filled weight total weight- brewer & filled dispenser hot water tank capacity shipping weight shipping dimensions cbs-2131xts single-3 liter 25...

  • Page 6: Specifications-Ce

    4 e213252 2 x 3.0 kw 200-240 1 2+g terminal block 4.2 – 6.1 21.3—25.5 14.0 gal/53 lit 3-liter airpot version, optional stainless steel brew basket electrical configurations cbs_2131xts—single 3 liter airpot version [optional: stainless steel brew basket] configuration code heater configuration volta...

  • Page 7

    5 electrical configurations cbs_2131xts—single 3 liter airpot version [optional: stainless steel brew basket] configuration code heater configuration voltage phase wires electrical connection kw maximum amp draw gallon/hour (3 liters per batch) e213157m 1 x 3.0 kw 200 - 240 1 2+g cord/no plug 2.2 – ...

  • Page 8

    6 rough-in cbs-2131xts—single station 3 liter airpot version drawing#1201.00011.00 rough-in cbs-2132xts—dual station 3 liter airpot version drawing#1201.00012.00

  • Page 9

    7 rough-in cbs-2131xts—single station 1-gallon airpot version drawing#1201.00013.00 rough-in cbs-2132xts—dual station 1-gallon airpot version drawing#1201.00014.00 designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject t...

  • Page 10: Operating Instructions

    8 accessing equipment and control screens layout of the xts brewer touch-screen for brewer operation brew basket sensor (not accessible) sd card interface port (load & save) hot water faucet locator removable for service access locator for airpot dispenser (two for cbs-2132) main power switch slide ...

  • Page 11

    9 Æ quick brewer setup notes install plumbing and electrical utilities. -see installation section in this guide turn rear power switch “on”. -located on back, lower right side brewer hot water tank will fill in 4-8 minutes. -ready screen will display ” ▪ filling” heater(s) activate when tank is full...

  • Page 12: Brewing-Shown By Touchscreen

    10 brewing-shown by touchscreen brewer screens displayed for brewing notes cbs-2131 cbs-2132 “ready screen” tap screen to display menus note: there are three “brew at temperature definitons”. The “brew at temperature default routine is shown below. Unit displays four preprogrammed batch buttons per ...

  • Page 13

    11 programming- operator access programming -the fetco cbs-2130 brewers have four brew batch menus per side. The menus are preprogrammed with basic settings that will operate the equipment as purchased. There are two batches each marked “regular” and two marked “decaf” -most operators prefer a full ...

  • Page 18: Error Codes

    16 error codes Æ contact specialized personnel for error codes code description possible cause corrective action how to clear error codes 050 shorted temperature probe probe failure. Replace probe. 051 open temperature probe. Bad probe connection, or probe failure. Check all connections. Replace pro...

  • Page 19: Dispenser Diagram

    17 airpot use instructions and cleaning dispenser diagram ® d041 (3 liter) and d063 (1 gallon) airpot description : dispenser diagram the fetco d041 (3 liter) and d063 (1 gallon) airpots are lever type, air pressure evacuated beverage dispenser featuring double-wall, vacuum insulated construction. T...

  • Page 20

    18 dispenser operation instructions ® d041 (3 liter) and d063 (1 gallon) airpot to fill : 1 set brewer to dispense the proper amount into the airpot : 3 liters (fetco d041) -or- 1gallon (fetco d063) 2 squeeze the lid release buttons to release the lid. Swing the lid completely backwards 3 place the ...

  • Page 21

    19 c 4 h 9 och 2 ch 2 oh dispenser cleaning & maintenance ® d041 (3 liter) and d063 (1 gallon) airpot to clean : 1 squeeze the lid release buttons to release the lid. Press the lid detach button that will completely detach the lid. Remove the lid cover. 2 remove the drip-through detach the down-tube...

  • Page 22

    20 operator training review the operating procedures with whoever will be using the brewer. Pay particular attention to the following areas: 1. Always pre-heat the dispensers before the first use of each day by filling them half way with hot water, and letting them stand for at least 5 minutes. 2. D...

  • Page 23: Installation

    21 installation (for qualified service technicians only) guide to a successful installation if not installed correctly by qualified personnel, the brewer will not operate properly and damage may result. Damages resulting from improper installation are not covered by the warranty, and will void the w...

  • Page 24

    22 installation directions brewer setup 1. Review the dimensions for the unit and verify that it will fit properly in the space intended for it. Verify that the counter or table will support the total weight of the brewer and dispensers when filled (specifics-page 3). 2. Place the brewer on the coun...

  • Page 25

    23 terminal block diagram electrical configurations terminal block diagram – north america & international final setup cbs-2131 120 volt models (some)cbs-2131 and (all)cbs-2132 208-240 volt models factory configuration: attached cord 120 vac, 3 wires l1 l2 n ground lug cord with nema 5-15p or 5-20p ...

  • Page 26

    24 designs, materials, specifications, physical dimensions, firmware and software protocol for equipment or replacement parts are subject to change without notice. Fetco ® cbs-2130 xts coffee brewing system complete commercial parts listing for cbs-2131 xts and cbs-2132 xts model range includes type...

  • Page 27

    25 parts diagrams, bill of materials lists drawing 1101.00152.00 cbs-2131xts assembly, 3 liter.

  • Page 28

    26 drawing 1101.00152.00 cbs-2131xts assembly, 3 liter ref# qty part number description 1 1 1111.00036.00 weldment body, complete, cbs-2131 2 2 1024.00049.00 edge protector, 7.00"lg, cbs-2130 3 1 1086.00004.00 bushing, snap, 1" mounting hole 4 1 1024.00063.00 o-ring, 3 15/16" x 3/32" cs, dash # 154,...

  • Page 29

    27 drawing 1104.00053.00 tank assy, cbs-2131xts ref# qty part number description 1 1 1114.00080.00 weldment tank cbs-2131, grommet design 2 2 1024.00053.00 level and temp probe grommet 3 1 1024.00062.00 grommet, short, silicone, level and temp probe 4 3 1024.00050.00 grommet, silicone, 11.4mm id 5 1...

  • Page 30

    28 drawing 1104.00052.00 tank assy, cbs-2132xts ref# qty part number description 1 1 1114.00081.00 weldment tank cbs-2132, grommet design 2 2 1024.00053.00 level and temp probe grommet 3 2 1024.00062.00 grommet, short, silicone, level and temp probe 4 4 1024.00050.00 grommet, silicone, 11.4mm id 5 2...

  • Page 31

    29 drawing 1101.00153.00 cbs-2132xts assembly, 3 liter.

  • Page 32

    30 drawing 1101.00153.00 cbs-2132xts assembly, 3 liter ref# qty part number description 1 1 1111.00037.00 weldment body, complete, cbs-2132 2 2 1024.00049.00 edge protector, 7.00"lg, cbs-2130 3 2 1086.00004.00 bushing, snap, 1" mounting hole 4 2 1024.00063.00 o-ring, 3 15/16" x 3/32" cs, dash # 154,...

  • Page 33

    31 drawing 1101.00151.00 assembly, cbs-2131xts, 1 gal..

  • Page 34

    32 drawing 1101.00151.00 assembly, cbs-2131xts, 1 gal. Ref# qty part number description 1 1 1111.00036.00 weldment body, complete, cbs-2131 2 2 1024.00049.00 edge protector, 7.00"lg, cbs-2130 3 1 1086.00004.00 bushing, snap, 1" mounting hole 4 1 1024.00063.00 o-ring, 3 15/16" x 3/32" cs, dash # 154,...

  • Page 35

    33 drawing 1101.00150.00 cbs-2132xts assembly, 1 gallon.

  • Page 36

    34 drawing 1101.00150.00 cbs-2132xts assembly, 1 gallon ref# qty part number description 1 1 1111.00037.00 weldment body, complete, cbs-2132 2 2 1024.00049.00 edge protector, 7.00"lg, cbs-2130 3 2 1086.00004.00 bushing, snap, 1" mounting hole 4 2 1024.00063.00 o-ring, 3 15/16" x 3/32" cs, dash # 154...

  • Page 37

    35 1102.00203.00 spray housing assembly parts cbs-2130 xts ref . Qty part no description 1 1 1102.00020.00 spray housing assy csd design 2 1 1024.00002.00 oring, as568a-019, buna-n 3 1 1102.00019.00 assembly, cascade spray dome 4 1 1023.00189.00 adapter, spray hsg, dsv11 valve 5 2 1082.00068.00 scre...

  • Page 38

    36 wiring diagrams-north america drawing 1401.00050.00 cbs-2132xts wiring - north america.

  • Page 39

    37 wiring diagrams-ce drawing 1401.00051.00 cbs-2131xts wiring- north america.

  • Page 40

    38 drawing 1401.00052.00 cbs-2131xts wiring-ce.

  • Page 41

    39 drawing 1401.00054.00 cbs-2132xts wiring-ce.