Temperature on demand us design patent applied for. Other temperature on demand us patents applied for. Fetco®, is a trademark of food equipment technologies company. © 2011 food equipment technologies company november 2011 notice to installer: please leave this book with the machine. User’s guide t...
2 g w g w nema plug configuration nema 5-15p nema 5-20p nema 6-15p fetco ® hwd-2105 hot water dispenser contact information fetco ® food equipment technologies company 600 rose road lake zurich • il • 60047-0429 • usa internet: www.Fetco.Com phone: (800) 338-2699 (us & canada) (847) 719-3000 fax: (8...
3 dimensions & utility connections water inlet fitting: ¼ inch male flare fitting installation the installation must comply with applicable federal, state, and local codes having jurisdiction at your location. Utilize only qualified beverage equipment service technicians for installation. A service ...
4 final setup-fill and initial heating 1. Turn on the incoming water supply line and inspect both inside and outside of the unit for leaks in all fittings and tubes. 2. Plug the unit into the appropriate electrical outlet. 3. Turn on the unit’s main power switch (located on the back). Screen one-the...
5 operating principles the dispense valve assembly delivers precision temperature water at selected temperatures. When hot water is drawn from the faucet, the fill valve pulses on and off every few seconds to replenish the tank. By controlling the flow of incoming water, the amount of cold water ent...
6 control and operational screens the fetco® hot water dispenser uses a digital display screen and illuminated touch pads to control the set-up and on-off water functions. -upper and lower pads are lighted when ready, and may alternately brighten and dim. -touch lower (red) pad to activate. -“warnin...
7 programming and diagnostic screens to enter programming and diagnostics dialog screens turn power switch on lower back of unit “off” turn power switch “on” and when first screen is displayed touch lower (red) pad to activate the first programming screen will display. Displayed are the default sett...
8 parts list for hwd-2105 non tod service parts drawing 1109.00026.00 item no part no description qty 1 1023.00131.00 top cover hwd-2105 1 2 1023.00136.00 leg hwd-2100 4 3 1023.00147.00 plug, tank service drain for 18ga and up body 1 4 1024.00040.00 card plug, hwd-2100 1 5 1025.00039.00 tube, 5/8" o...
9 16 1063.00001.00 cord, power, iec-320-19, 20a/125vac 1 16 1063.00002.00 cord, power, iec-320-19, 15a/125vac 1 17 1065.00001.00 connector, iec power en60320 c20, 0722 series 1 18 1086.00002.00 clamp, hose, size "g" nylon 2 19 1086.00003.00 uniclamp, 15.9 hose od clamp 6 20 1102.00153.00 front panel...
10 parts list for hwd-2105 with tod hot water tank drawing 1104.00018.00 item# part# description qty 1 1107.00008.00 heater assembly, immersion 2100w/120vac 1 1 1107.00014.00 heater assembly, immersion 1440w/120vac 1 1 1107.00015.00 heater assembly, immersion 3200w/200-230vac export 1 2 1059.00001.0...
11.
