Temperature on demand us design patent applied for. Other temperature on demand us patents applied for. Fetco®, is a trademark of food equipment technologies company. © 2011 food equipment technologies company november 2011 notice to installer: please leave this book with the machine. ® user’s guide...
2 fetco ® hot water dispenser contact information fetco ® food equipment technologies company 600 rose road lake zurich • il • 60047-0429 • usa internet: www.Fetco.Com phone: (800) 338-2699 (us & canada) (847) 719-3000 fax: (847) 719-3001 email: sales@fetco.Com techsupport@fetco.Com description & fe...
3 dimensions & utility connections water inlet fitting: ¼ inch male flare fitting installation the installation must comply with applicable federal, state, and local codes having jurisdiction at your location. Utilize only qualified beverage equipment service technicians for installation. A service ...
4 final setup-fill and initial heating 1. Turn on the incoming water supply line and inspect both inside and outside of the unit for leaks in all fittings and tubes. 2. Plug the unit into the appropriate electrical outlet. 3. Turn on the unit’s main power switch (located on the back). Screen one-the...
5 operating principles the dispense valve assembly mixes very hot tank water with cooler water to deliver precision temperature water at selected temperatures. When hot water is drawn from the faucet, the fill valve pulses on and off every few seconds to replenish the tank. By controlling the flow o...
6 control and operational screens the fetco® hot water dispenser uses a digital display screen and illuminated touch pads to control the set-up and on-off water functions. -upper and lower pads are lighted when ready, and may alternately brighten and dim. -touch lower (red) pad to activate. -“warnin...
7 programming and diagnostic screens to enter programming and diagnostics dialog screens turn power switch on lower back of unit “off” turn power switch “on” and when first screen is displayed touch lower (red) pad to activate the first programming screen will display. Displayed are the default sett...
8 hwd-2110 domestic wiring diagram.
9 hwd-2110 export wiring diagram.
10 parts list for hwd-2110 hot water tank drawing 1104.00028.00 item# part# description qty 1 1107.00013.00 heater assembly, immersion 5000w/240vac 1 2 1059.00001.00 triac 40a, 600v 1 3 1053.00004.00 thermostat, single shot, 25a 1 4 1024.00007.00 o-ring, dash #344, tank cover 1 5 1102.00007.00 tank ...
11 drawing 1109.00033.00 hwd-2110 service parts.
12 parts list for hwd-2110 with tod service parts drawing 1109.00033.00 item # part number description qty 1 1023.00136.00 leg hwd-2100 4 2 1023.00146.00 top cover hwd-2110 1 3 1023.00147.00 plug, tank service drain for 18ga and up body 1 4 1024.00040.00 card plug, hwd-2100 1 5 1025.00040.00 tube, 1...
