FezzAudio Silver Luna User Manual - page 2
2
SAFETY TIPS ______________________________
In order to obtain the highest possible sound reproduction quality and for
the sake of your own safety, please kindly refer to the following safety
guidelines and please adhere to them:
• Never place the Fezz Audio Silver Luna amplifier near heat sources, such as
radiators, heaters or direct sunlight. Ensure adequate ventilation and airflow.
• We also warn against exposure of the amplifier to conditions such as very low
temperatures and/or high humidity.
• During normal operation, the vacuum tubes radiate significant amounts of
heat - there is a risk of burns
• The amplifier should be plugged directly into a wall socket. If you must use
an extension cord, please make sure that it has load parameters sufficient to
ensure proper handling of current delivery to the device.
• When cleaning, always disconnect the Silver Luna from the power source. Use
a dry, soft cloth. Do not use water or cleaning agents.
• If your amplifier starts to misbehave or to work incorrectly, if it’s temperature
gets too high or you start feeling smoke - immediately disconnect the device
from the mains.
•
Due to the risk of exposure to high voltages – please do not open the lid of the
amplifier. ATTENTION: This warning remains in force also in a situation
where the device is already disconnected from the wall outlet.
• Always replace fuses in accordance with the original, intended specification.
• Do not make repairs on your own, or adjustments beyond those as described
in this manual. Execution of any unauthorized repairs or modifications of the
device result in a loss of warranty.