Ffeuk 3171MR Installation And Operating Manual - 8. Accessories
8
8. Accessories
Part Number
Description
Picture
1000-026
LID ASSEMBLY - TYPE MR
1000-028
LID ASSEMBLY - TYPE S
G003
GLAND M20 TRS C I P
S171
SEAL 400-024449041
1000-027
4MM HEX DRIVER LONG
0051-002-01
BLANKING PLUG IP66/67
23640-083
ADAPTOR 20mm MALE
Document Number: 0044-060-02-EN
6. Functional Test
To check correct set-up of the vibration switch, repeat set-up sequence section 5.
7. Maintenance
There are no user serviceable parts inside the vibration switch. Maintenance is not required
except for periodic external visual inspection of the following:
• Confirm lid screws and vibration switch M5 fixings to machine are tight
• Confirm cable gland is tight to the enclosure and adequately secures the cable
• Confirm security of wires to external earth stud, where used
• Visually check vibration switch supply cable is installed as per local regulations and
undamaged