- DL manuals
- FHM
- Chipper
- ECO-13
- Owner's Manual
FHM ECO-13 Owner's Manual
For product questions or service,
CALL 1-541-895-3083
or go to www.betstproducts.com
When you call the help-line you will need to have the following
information:
Date of Purchase:
_______________________
Location of Purchase: _______________________
Serial #:
_______________________
Chipper/Shredder models: ECO-13
READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS
CAREFULLY SAVE THESE INSTRUCTIONS.
Owner’s Manual
Chipper/Shredder with 2-Way Feed
Summary of ECO-13
Page 1
For product questions or service, call 1-541-895-3083 or go to www.Betstproducts.Com when you call the help-line you will need to have the following information: date of purchase: _______________________ location of purchase: _______________________ serial #: _______________________ chipper/shredder...
Page 2
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 2 revision 9-19-14 the information and specifications included in this publication were in effect at the time of approval for printing. This manual contains important safety instructions for chipper/shredders read safety warn...
Page 3: Contents
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 3 revision 9-19-14 contents warnings ............................................................................ 1 product specifications........................................................ 2 component identification ......
Page 4: Warnings
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 4 revision 9-19-14 warnings this symbol indicates important safety instructions which, if not followed, could endanger personal safety and/or property. Read and follow all instructions in this manual before attempting to oper...
Page 5: Warnings
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 5 revision 9-19-14 training 1. Read, understand, and follow all instructions on the machine and in the manual) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and f...
Page 6: Component Identification
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 6 revision 9-19-14 component identification shredder funnel use the chipper funnel to feed leaves or twigs up to 1” diameter chipper chute use the chipper chute to feed longer and/or thicker pieces of yard waste into the impe...
Page 7
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 7 revision 9-19-14 missing parts request form name phone email address important: please include your receipt. Without a receipt, your order will be delayed. You may also email us at: customerservice@betstproducts.Com. If ema...
Page 8: Safety Information
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 8 revision 9-19-14 safety information preparation 1. Thoroughly inspect the area where the chipper/ shredder is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or thrown and caus...
Page 9: Operating Guidelines
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 9 revision 9-19-14 8. Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground i...
Page 10: Assembly Instructions
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 10 revision 9-19-14 required tools: approximate assembly time: 1. Remove the chipper from its carton. Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton. 2. Verify all pa...
Page 11
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 11 revision 9-19-14 engine only—see manufacturer’s manual for engine important engine information note: the chipper/shredder operates most efficiently at the factory set engine speed of 3600 rpm. The speed is controlled by th...
Page 12: Operating Instructions
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 12 revision 9-19-14 steps until engine fires. Rapid retraction of the recoil starter cord can pull the starter cord back faster than you can let go. When starting the engine, pull the cord slowly until resistance is felt then...
Page 13: Maintenance And Storage
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 13 revision 9-19-14 maintenance and storage item before each use 20 hrs or every 3 months 50 hrs or every 3 months 100 hrs or every 6 months 300 hrs or every 1 year engine oil (check) x engine oil (change) x air cleaner (chec...
Page 14: Maintenance & Storage
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 14 revision 9-19-14 always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine. Removing and sharpening the blade the chipper was shipped...
Page 15
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 15 revision 9-19-14 troubleshooting problem cause remedy engine fails to start 1. Spark plug wire disconnected. 2. Fuel tank empty or stale fuel. 3. Throttle control lever not in correct starting position. (if equipped) 4. Ch...
Page 16
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 16 revision 9-19-14 parts breakdown.
Page 17
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 17 revision 9-19-14 ec019.001 parts list ref. Part number description 名 称 及 规 格 qty. 1 ls18.101 handle cover 扶 手 套 1 2 eco19.101 draw bar 牵 引 杆 1 3 dp8x60 lock pin d8x60 d形 销 8x60 1 4 gb6170-m12 nut m12 螺 母 m12 4 5 lp12 lock ...
Page 18
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 18 revision 9-19-14 parts breakdown - continued.
Page 19
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 19 revision 9-19-14 ec019.002 parts list ref. Part number description 名 称 及 规 格 qty. 1 reach 04-3560 clamping coupling 3560 胀 套 3560 1 2 eco19.103 pulley 小 带 轮 1 3 f90507 bearing f90507,set 方 座 轴 承 f90507 2 4 gb889.1-m12 lock...
Page 20
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 20 revision 9-19-14 parts breakdown - continued.
Page 21
Rugged, labor and time saving products powrkraft eco-13 cripper / shredder 21 revision 9-19-14 ec019.003 parts list ref. Part number description 名 称 及 规 格 qty. 1 eco19.023 rotor,wdmt 刀 盘 焊 合 件 1 2 eco19.114 spacer 隔 套 2 3 gb2673-m8x30 countersunk screw m8x 沉 头 螺 钉 m8x30 6 3 4 eco19.115 knife 动 刀 片 2...
Page 22: Parts Request Form
Parts request form fax to 541‐895‐2756 or e‐mail parts@betstproducts.Com name: address: city state zip: phone: e‐mail: model number: serial number: purchased from: purchase date: item no. Description qty price amount comments:.
Page 23: Limited Warranty
Farmer helper machinery brand limited warranty farmer helper machinery co. Ltd. Warrants to original purchaser that f a r m e r h e l p e r m a c h i n e r y c o . L t d . Products are free from major defects in material under normal use and service for a period of two (2) years from the date the pr...
Page 24
Betst products, llc. 541-895-3083 support@betstco.Com warranty void if registration is not received or recorded online within 30 days of purchase date or ship date, whichever is later. Farmer helper machinery registration item________________________________model # _________________ purchase date___...
Page 25
2 year extended warranty & registration fa rmer h elp er ma ch in ery branded products 2 year extended warranty 2 year extended warranty amends to original recorded manufacturers warranty registration the time period of described coverage. Extended warranty does not apply to consumable and expendabl...