1. DL manuals
  2. Fiat
  3. Automobile
  4. 2013 500 ABARTH
  5. Owner's Manual

Fiat 2013 500 ABARTH Owner's Manual

Other manuals for 2013 500 ABARTH: Owner's Manual, User Manual

Summary of 2013 500 ABARTH

  • Page 1

    Chrysler group llc o w n e r ’ s m a n u a l 2 0 1 3 2013 fia t 500 13ff500-126-ae fifth edition rev 1 printed in u.S.A. Fiat 500

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name chrysler group llc shall be deemed to be deleted and the name chrysler canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability c...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 understa...

  • Page 5: Introduction

    Introduction contents ! Introduction . . . . . . . . . . . . . . . . . . . . . . . .4 ! How to use this manual . . . . . . . . . . . . . .5 ! Warnings and cautions . . . . . . . . . . . . . .7 ! Vehicle identification number . . . . . . . .7 ! Vehicle modifications/alterations . . . .8 1.

  • Page 6

    Introduction congratulations on selecting your new vehicle. Be as- sured that it represents precision workmanship, distinc- tive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and engineering spe...

  • Page 7

    How to use this manual consult the table of contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index ...

  • Page 8

    6 introduction.

  • Page 9

    Warnings and cautions this owners manual contains warnings against op- erating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire owners manual, you may miss importan...

  • Page 10

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped vin location 8 introduction.

  • Page 11: Contents

    Things to know before starting your vehicle contents ! A word about your keys . . . . . . . . . . . . .11 ▫ ignition key removal . . . . . . . . . . . . . . . . . . .11 ▫ locking doors with a key. . . . . . . . . . . . . . . .13 ▫ key-in-ignition reminder. . . . . . . . . . . . . . . . .13 ! Sentry ...

  • Page 12

    ▫ power window switches . . . . . . . . . . . . . . . . .26 ! Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 ! Occupant restraints . . . . . . . . . . . . . . . .29 ▫ lap/shoulder belts . . . . . . . . . . . . . . . . . . . .32 ▫ lap/shoulder belt untwisting procedure . . . . .37...

  • Page 13

    A word about your keys the key fob contains the remote keyless entry (rke) transmitter with an integrated key. To use the mechanical key simply press the mechanical key release button . The vehicle is supplied with a code card containing key code numbers to order duplicate keys, and the autho- rized...

  • Page 14

    Warning! • before exiting a vehicle, always apply the parking brake, shift the transmission into park, and push ignition button to place ignition in off position. When leaving the vehicle, always lock your ve- hicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. •...

  • Page 15

    Warning! (continued) • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. Caution! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all the doors when leaving the vehicle unatt...

  • Page 16

    Note: a key which has not been programmed is also considered an invalid key, even if it is cut to fit the ignition switch lock cylinder for that vehicle. If the vehicle security light is on after the key is turned to the on/run position, it indicates that there is a problem with the electronics. Cau...

  • Page 17

    Replacement keys note: only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a sentry key® has been programmed to a vehicle, it cannot be programmed to any other vehicle. At the time of purchase, the original owner is provided with a four-digit persona...

  • Page 18

    Remote keyless entry (rke) — if equipped this system allows you to lock or unlock the doors and liftgate from distances up to approximately 66 ft (20 m) using a hand-held remote keyless entry (rke) transmit- ter. The rke transmitter does not need to be pointed at the vehicle to activate the system. ...

  • Page 19

    To unlock the doors and liftgate press and release the unlock button on the rke transmitter once to unlock the driver’s door or twice, within five seconds, to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also...

  • Page 20

    Opening power top remote function: 1. Open — push and hold the unlock button down on the key fob for a minimum of three seconds to initiate power top open. The roof will stop opening when- ever the unlock button on the key fob is released, or when it reaches the spoiler position note: if your power ...

  • Page 21

    Warning! (continued) • only drive the vehicle with the convertible top completely closed and latched or fully lowered into its stowage compartment. • do not operate the power top when the vehicle is in motion. To lock the doors and liftgate press and release the lock button on the rke transmit- ter ...

  • Page 22

    Transmitter battery replacement note: perchlorate material – special handling may ap- ply. See www.Dtsc.Ca.Gov/hazardouswaste/perchlorate the recommended replacement battery is cr2032. 1. Press the mechanical key release button and release the mechanical key to access the battery case screw located ...

  • Page 23

    3. Take out the battery case. Remove and replace the battery observing its polarity. 4. Refit the battery case inside the key fob and turn the screw to lock it into place. Key fob screw location battery case removed 2 things to know before starting your vehicle 21.

  • Page 24

    General information this device complies with part 15 of the fcc rules and rss 210 of industry canada. Operation is subject to the following conditions: • this device may not cause harmful interference. • this device must accept any interference received, including interference that may cause undesi...

  • Page 25

    Door locks the door locks can be manually locked or unlocked from inside the vehicle by using the door handle. If the door handle is pushed a red lock indicator will show on the door handle (indicating locked) when the door is closed, the door will lock. Door lock handle 2 things to know before star...

  • Page 26

    Warning! • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • for personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • before e...

  • Page 27

    Power door locks a power door lock switch is incorporated into the door handle. Push or pull the handle to lock or unlock the doors and liftgate. If the door handle is pushed a red lock indicator will show on the door handle (indicating locked) when the door is closed, the door will lock. Note: to p...

  • Page 28

    Autoclose — if equipped when enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). To change the setting proceed as follows: 1. Briefly press the set esc button “on” or “off” will flash on the display (according to the previous set- ting). 2. Press the up...

  • Page 29

    Auto-down — if equipped the driver’s door window switch may have an auto- down feature. Press the window switch for approxi- mately one second, release, and the window will go down automatically. To cancel the auto-down move- ment, operate the switch in either the up or down direction and release th...

  • Page 30

    Liftgate to unlock the liftgate, use the remote keyless entry (rke) transmitter or activate the power door lock switches located on the front door handles. To open the liftgate, squeeze the liftgate release handle and pull the liftgate open with one fluid motion. Liftgate handle 28 things to know be...

  • Page 31

    Warning! • driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • if you are required to drive with the liftgate open, make sure that all windows are c...

  • Page 32

    • all seat belt systems (except the driver’s) include automatic locking retractors (alrs), which lock the seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to restrain a child seat or secure a large item in a seat — if equipped pl...

  • Page 33

    You should read the instructions provided with your child restraint to make sure that you are using it properly. 2. All occupants should always wear their lap and shoulder belts properly. 3. The driver and front passenger seats should be moved back as far as practical to allow the advanced front air...

  • Page 34

    Warning! (continued) • in a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up...

  • Page 35

    Warning! • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure ever...

  • Page 36

    2. The seat belt latch plate is along side the pillar near the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When the belt is long enough to fit, insert the latch plate into the buc...

  • Page 37

    Warning! • a belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal inju- ries. Always buckle your belt into the buckle nearest you. • a belt that is too loose will not protect you prop- erly. In a sudden stop you...

  • Page 38

    Warning! • a lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • a twisted belt may not protect you properly. In a collisi...

  • Page 39

    6. To release the belt, push the red button on the buckle. The belt will automatically retract to its stowed posi- tion. If necessary, slide the latch plate down the webbing to allow the belt to retract fully. Warning! A frayed or torn belt could rip apart in a collision and leave you with no protec...

  • Page 40

    Restraints” section. The chart below defines the type of feature for each seating position. Driver passenger first row n/a alr second row alr alr • n/a — not applicable • alr — automatic locking retractor if the passenger seating position is equipped with an alr and is being used for normal usage: o...

  • Page 41

    How to engage the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in t...

  • Page 42

    Seat belt pretensioners the seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by assuring that the belt is tight about the oc...

  • Page 43

    Unbuckled while traveling at speeds greater than 5 mph (8 km/h), beltalert® will provide both audio and visual notification. The front passenger seat beltalert® is not active when the front passenger seat is unoccupied. Beltalert® may be triggered when an animal or heavy object is on the front passe...

  • Page 44

    Seat belts and pregnant women we recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible. Keep the belt lo...

  • Page 45

    Note: the driver and passenger advanced front air bags are certified to new federal regulations for ad- vanced air bags. The advanced front air bags are designed to allow the air bags to have different inflation levels based on several factors, including the severity and type of collision. This vehi...

  • Page 46

    • air bag warning light • steering wheel and column • instrument panel • supplemental driver side knee air bag • knee impact bolster • driver advanced front air bag • passenger advanced front air bag • supplemental seat-mounted side air bags (sab) • supplemental side air bag inflatable curtains (sab...

  • Page 47

    Warning! (continued) • do not put anything on or around the air bag covers or attempt to open them manually. You may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air ba...

  • Page 48

    Supplemental side air bag inflatable curtain (sabic) supplemental side air bag inflatable curtains (sabic) may offer side-impact protection to front and rear seat outboard occupants in addition to that provided by the body structure. Each air bag features inflated chambers, placed adjacent to the he...

  • Page 49

    The system includes side impact sensors that are cali- brated to deploy the seat-mounted side air bags (sab) and sabic during impacts that require air bag occupant protection. Sab and sabic air bags are a supplement to the seat belt restraint system. Occupants, including children who are up against ...

  • Page 50

    Warning! (continued) • your vehicle is equipped with sabic air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require perma- nent attachments (bolts or screws) for installation on the vehicle roof. Do ...

  • Page 51

    Orc deploys the advanced front air bags, supplemen- tal driver side knee air bag, supplemental side air bag inflatable curtain (sabic), supplemental seat-mounted side air bags (sab), and front seat belt pretensioners, as required, depending on several factors, including the severity and type of impa...

  • Page 52

    On/run or start position. If the key is in the off/ lock position, or not in the ignition, the air bag system is not on and the air bags will not inflate. The orc contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to de...

  • Page 53

    Quantity of non-toxic gas is generated to inflate the advanced front air bags. Different air bag inflation rates are possible, based on several factors, including the collision type and severity. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out...

  • Page 54

    Triggered, releasing a quantity of non-toxic gas. The inflating sab exits through the seat seam into the space between the occupant and the door. The sab fully inflate in about 10 milliseconds. The side air bag moves at a very high speed and with such a high force that it could injure you if you are...

  • Page 55

    Enhanced accident response system in the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event, the orc will determine whether to have the enhanced accident response system perform the follow- in...

  • Page 56

    Customer action customer will see 1. Turn ignition off. (turn signal switch must be placed in neutral state). 2. Turn ignition on. Left turn light is off. Right turn light blinks. 3. Turn right turn signal switch on. Right turn light is on solid. Left turn light blinks. 4. Turn left turn signal swit...

  • Page 57

    If a reset procedure step is not completed within 45 seconds, then the turn signal lights will turn off and the reset procedure must be performed again in order to be successful. If a deployment occurs the advanced front air bags are designed to deflate immediately after deployment. Note: in a rollo...

  • Page 58

    Warning! Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have the air bags, seat belt pretensioners, and the front seat belt retrac- tor assemblies replaced by an authorized studio immediately. Also, have the occupant restraint con- troller (orc) system service...

  • Page 59

    Warning! (continued) • do not attempt to modify any part of your air bag system. The air bag may inflate accidentally or may not function properly if modifications are made. Take your vehicle to an authorized studio for any air bag system service. If your seat, including your trim cover and cushion,...

  • Page 60

    Note: if the speedometer, tachometer, or any engine related gauges are not working, the occupant restraint controller (orc) may also be disabled. The air bags may not be ready to inflate for your protection. Promptly check the body control module (bcm) fuse block inside the vehicle for blown fuses. ...

  • Page 61

    To read data recorded by an edr, special equipment is required, and access to the vehicle or the edr is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have access to the vehicle or the edr. ...

  • Page 62

    Note: for additional information, refer to www.Seatcheck.Org or call 1–866–seatcheck. Cana- dian residents should refer to transport canada’s web- site for additional information: http://www.Tc.Gc.Ca/ eng/roadsafety/safedrivers-childsafety-index-53.Htm warning! In a collision, an unrestrained child ...

  • Page 63

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight limits of their child restraint either an infant carrier ...

  • Page 64

    Infants and child restraints safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. Two types of child restraints can be used rearward-facing: infant carrie...

  • Page 65

    Have outgrown the rear-facing weight or height limit of their rear-facing convertible child seat. Children should remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above t...

  • Page 66

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether ...

  • Page 67

    Recommendations for attaching child restraints restraint type combined weight of the child + child restraint use any attachment method shown with an “x” below latch – lower anchors only seat belt only latch – lower anchors + top tether anchor seat belt + top tether anchor rear-facing child restraint...

  • Page 68

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint anchor- age system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 69

    Latch positions for installing child restraints in this vehicle • lower anchorage symbol 2 anchorages per seating position • top tether anchorage symbol 2 things to know before starting your vehicle 67.

  • Page 70

    What is the weight limit (child’s weight + weight of the child restraint) for using the latch anchorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and teth...

  • Page 71

    Can the rear-facing child restraint touch the back of the front passenger seat? Yes the child seat may touch the back of the front passenger seat if the child restraint manufac- turer also allows contact. See your child re- straint owner’s manual for more information. Can the head restraints be remo...

  • Page 72

    Locating the latch anchorages in addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. Latch-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to...

  • Page 73

    2. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 3. Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recli...

  • Page 74

    Behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. Do not lock the seatbelt. Remind all children in the vehicle that the seat belts are not toys and that they should not play with them. Warning! Improper installation of a child restraint to the ...

  • Page 75

    Lap/shoulder belt systems for installing child restraints in this vehicle what is the weight limit (child’s weight + weight of the child restraint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tether anc...

  • Page 76

    Can the rear-facing child restraint touch the back of the front passenger seat? Yes contact between the front passenger seat and the child restraint is allowed, if the child restraint manufacturer also allows contact. Can the head restraints be removed? Yes, all. Can the buckle stalk be twisted to t...

  • Page 77

    6. Try to pull the webbing out of the retractor. If it is locked, you should not be able to pull out any web- bing. If the retractor is not locked, repeat step 5. 7. Finally, pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearwa...

  • Page 78

    5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “lower anchors and tethers for chil- dren (latch) restraint system” for directions to attach a tether anchor. 6. Test...

  • Page 79

    2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts. If...

  • Page 80

    Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • if your vehicle is equipped with a split rear seat, make sure the tethe...

  • Page 81

    Caution! Never use non-detergent oil or straight mineral oil in the engine or damage may result. Note: a new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of diff...

  • Page 82

    Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (co), follow these safety tips: • do not run the engine in a closed garage or in confined...

  • Page 83

    Safety checks you should make inside the vehicle seat belts inspect the belt system periodically, checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat b...

  • Page 84

    Warning! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury. • always make sure that floor mats are properly attached to the floor mat fasteners. • never place or install floor mats or other floor coverings in the vehicle that cannot b...

  • Page 85

    Periodic safety checks you should make outside the vehicle tires examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Ch...

  • Page 87: Contents

    Understanding the features of your vehicle contents ! Power convertible top — if equipped . .88 ▫ lowering the power top. . . . . . . . . . . . . . . . .88 ▫ raising the power top . . . . . . . . . . . . . . . . . .89 ▫ power convertible top relearn procedure . . . . .90 ▫ wind stop . . . . . . . . ...

  • Page 88

    ▫ ez entry feature . . . . . . . . . . . . . . . . . . . . . .106 ▫ memory feature . . . . . . . . . . . . . . . . . . . . . .107 ▫ heated seats — if equipped . . . . . . . . . . . . .107 ▫ head restraints . . . . . . . . . . . . . . . . . . . . . . .108 ! To open and close the hood . . . . . . . . ...

  • Page 89

    ▫ to vary the speed setting . . . . . . . . . . . . . . .124 ▫ to accelerate for passing . . . . . . . . . . . . . . . .124 ! Rear park assist — if equipped . . . . . . . .125 ▫ rear park assist sensors . . . . . . . . . . . . . . . .125 ▫ rear park assist alerts. . . . . . . . . . . . . . . . . .12...

  • Page 90

    Power convertible top — if equipped on vehicles equipped with a power convertible top, the power convertible top switch is located on the overhead console. The switch contains two buttons. The passenger side button, is used to open the power top, and the driver side button, is used to close the powe...

  • Page 91

    Note: vertical movement only operates in auto open/ close mode. Raising the power top auto close from the convertible top fully open position, push the top close button for approximately one second for the three-quarter open/spoiler position. Push the top close button for approximately one second a ...

  • Page 92

    Caution! (continued) • use care when washing the vehicle, water pressure directed at the weather strip seals may cause water to leak into the vehicles interior. Warning! The convertible top does not provide the structural protection that a reinforced metal roof does and the fabric top cannot be expe...

  • Page 93

    6. Hold the closed button to move the top to the fully closed position. 7. Continue to hold the closed button until the top begins to cycle fully open, then release the closed button. At the end of step 7 the top will automatically cycle to the fully open position, and then close to the 1/4 open pos...

  • Page 94

    Mirrors inside day/night mirror the mirror can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night pos...

  • Page 95

    Automatic dimming mirror — if equipped this mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activa...

  • Page 96

    Power mirrors the power mirror controls are located on the driver’s door trim panel. The power mirror controls consist of a mirror select switch and a four-way mirror control switch. To adjust a mirror, press the mirror select switch to either the l (left) or r (right) to select the mirror you need ...

  • Page 97

    Spotter mirror — if equipped some models are equipped with a driver’s side spotter mirror. The spotter mirror allows for a greater range of visibility on the driver’s side of the vehicle. Folding mirrors the exterior mirrors are hinged to allow the mirror to pivot forward or rearward to help avoid d...

  • Page 98

    Sun visors the driver and passenger sun visors are located on the headliner, near the front windshield. The sun visor can be rotated downward or up against the door glass. Both sun visors are equipped with courtesy mirrors. Blue&me™ hands-free communication — if equipped overview windows mobile™-bas...

  • Page 99

    You are not required to train the voice recognition system to recognize your voice. This implies that the system is nearly equally performing with different persons, i.E.: the voice recognition system is of the “speaker independent” type. With this system you can also play your favorite music stored...

  • Page 100

    To get started with blue&me™ hands-free kit with voice recognition, you have to simply pair your bluetooth® wireless technology enabled mobile phone with the system. Pairing is an operation that has to be made only once. Note: • during the mobile phone pairing procedure, blue&me™ attempts to detect ...

  • Page 101

    “keywords”. When the system recognizes a keyword, it will respond with the appropriate action. Voice recognition is an easy and convenient way to use blue&me™. All the system functions are available within the blue&me™ main menu. When the car is not moving, you can scroll through the complete menu b...

  • Page 102

    Phone call, answer the other incoming phone call, and switch between two ongoing phone conversations. (call waiting is only supported by a subset of compat- ible mobile phones). • refusing incoming call or ending a call — you can refuse an incoming call or end a current call by pressing the phone ha...

  • Page 103

    Display the sender’s number/name and will ask you whether to read the text of the message to you. • to manage the list of sms texts received on your blue&me™ paired mobile phone. • to read the messages received and stored. Messages can be read multiple times. • to call the sms text sender using the ...

  • Page 104

    • playback options — while playing tracks you can select the following options: play, stop, next track, previous track, shuffle and loop track. Note: • the media player does not support audio files com- pressed with other formats and drm (digital right management) protected audio files. Non-supporte...

  • Page 105

    Warning! (continued) • keep the user’s guide in the car: when kept in the car, the user’s guide will be a ready reference for you and other users unfamiliar with the system. Please make certain that before using the system for the first time, all persons have access to the user’s guide and read its ...

  • Page 106

    Front seats forward/rearward adjustment your vehicle may be equipped with either an adjusting handle or adjusting bar that is located at the front of the seats, near the floor. While sitting in the seat, lift up on the adjusting handle or bar and move the seat forward or rearward. Release the adjust...

  • Page 107

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 108

    Seat height adjustment the driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pump the lever upward to raise the seat height, or pump the lever downward to lower the seat height. Ez entry feature the driver and front passenger seats have an ez e...

  • Page 109

    Lift the seatback upright and push the seat rearward to its locked position once the rear passengers are seated. Memory feature the driver seat also has a memory feature, which can operate in two ways: memory function option 1 — full seat back and track fore/aft position memory: after using the ez e...

  • Page 110

    Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially ...

  • Page 111

    Reactive head restraints — front seats the front driver and passenger seats are equipped with reactive head restraints. In the event of a rear impact the reactive head restraints will automatically extend forward minimizing the gap between the back of the occupant’s head and the reactive head restra...

  • Page 112

    Note: the head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see your authorized studio. Warning! Do not place items over the top of the reactive head restraint, such as coats, seat covers or portable dvd play...

  • Page 113

    To open and close the hood to open the hood, two latches must be released. 1. Pull the bottom of the red hood release lever, located on the left kick panel, rearward. 2. Rotate the safety catch under the front edge of the hood, near the center, and raise the hood. Lift the hood prop rod that clips t...

  • Page 114

    In hot climates, the prop rod may be hot. Pick up the prop rod at the foam on the end of the prop rod. Warning! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this w...

  • Page 115

    Headlights rotate the end of the multifunction lever up- ward to the first detent for headlight operation. Note: when the headlights are turned on, the daytime running lights will be deactivated. High beams with the low beams activated, push the multi- function lever towards the instrument panel to ...

  • Page 116

    Parking lights to turn on the parking lights, remove the key or turn the ignition to off/lock position and turn on the headlights. Daytime running lights — if equipped to activate the daytime running lights (drl), rotate the end of the multifunction lever to the o symbol. Note: the low beams and sid...

  • Page 117

    Note: the indicators will automatically turn off when the turn has been completed and the steering wheel is returned to a straight position. Lane change assist tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatical...

  • Page 118

    Caution! Before getting out of the vehicle be sure that the switch is in the center position or that the lights are off to avoid draining the battery. Interior light timing (center position) there are four different modes of operation that can be activated in this position: • when one door is opened...

  • Page 119

    Front fog lights — if equipped the fog light switch is located on the center stack of the instrument panel, just below the radio. Press the switch once to turn the front fog lights on. Press the switch a second time to turn the front fog lights off. Windshield wipers and washers the windshield wiper...

  • Page 120

    Front windshield wiper operation there are five different modes of operation for the front windshield wipers. The windshield wiper lever can be raised or lowered to access these modes: windshield wiper off this is the normal position of the wiper lever. Intermittent wiper operation push the lever do...

  • Page 121

    Manual high speed/mist push the lever upward from the off position. The wipers will operate at high speed to clear off road mist or spray from a passing vehicle. This operation will continue until the lever is released. When the lever is released, the wipers will return to the off position and autom...

  • Page 122

    Rear windshield wiper rotate the end of the windshield wiper/washer lever upward to the first detent past the intermittent settings for intermittent wipe operation. With the front wind- shield wiper active, rotate the end of the windshield wiper/washer lever upward. The rear wiper will operate in th...

  • Page 123

    Rear windshield washer operation push the windshield wiper/washer lever toward the instrument panel to activate the rear washer. Push and hold the lever for more than a half second and the wipers will activate automatically for three cycles after the lever is released. Tilt steering column — if equi...

  • Page 124

    Warning! Do not adjust the steering column while driving. Ad- justing the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death. Electronic speed control ...

  • Page 125

    Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic speed control system can be reactivated by pushing the electronic speed control on/off but...

  • Page 126

    Deactivate electronic speed control without erasing the set speed memory. Pressing the on/off button or turning the ignition switch off erases the set speed memory. To resume speed to resume a previously set speed, push the res (+) button and release. Resume can be used at any speed above 25 mph (40...

  • Page 127

    Note: the electronic speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without electronic speed control. Warning! Electronic speed control can be dangerous...

  • Page 128

    Obstacles, in the horizontal direction, from approximately 12 in (30 cm) up to 55 in (140 cm) from the center of the rear fascia/bumper and up to 24 in (60 cm) from the corners of the rear fascia/bumper, depending on the location, type and orientation of the obstacle. If several obstacles are detect...

  • Page 129

    Audible and visual signals supplied by the rear park assist system signal meaning indication obstacle distance an obstacle is present within the sensors’ field of view audible signal (dashboard loud- speaker) • sound pulses emitted at a rate that increases as the distance de- creases. • emits contin...

  • Page 130

    While audible signals are emitted, the audio system is not muted. The audible signal is turned off immediately if the distance increases. The tone cycle remains constant if the distance measured by the inner sensors is constant. If this condition occurs for the external sensors, the signal is turned...

  • Page 131

    Park assist system usage precautions note: • ensure that the outer surface and the underside of the rear bumper is clean and clear of snow, ice, mud, dirt or other obstruction to keep the rear park assist system operating properly. • jackhammers, large trucks, and other vibrations could affect the p...

  • Page 132

    Caution! (continued) • the vehicle must be driven slowly when using rear park assist in order to be able to stop in time when an obstacle is detected. It is recommended that the driver looks over his/her shoulder when using rear park assist. Warning! • drivers must be careful when backing up even wh...

  • Page 133

    Power sunroof — if equipped the power sunroof roof switch is located in the overhead console. Warning! • never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof s...

  • Page 134

    To open press and hold the power sunroof switch rearward for approximately one second and the sunroof will stop at the vented position. Press the switch a second time and hold for approximately one second and release, the sunroof will open fully, then stop automatically. This is called “express open...

  • Page 135

    Emergency operation in case of electrical failure the sunroof can be operated with the hex wrench that is located in the glove box. There is a plug located in the rear of the sunroof opening at the center of the vehicle. Removing the plug reveals a hex opening in the motor assembly of the sunroof. I...

  • Page 136

    Electrical power outlets there is a standard 12 volt (13 amp) power outlet, located in the floor console, for added convenience. This power outlet can power mobile phones, electronics and other low power devices. Power is available when the ignition switch is in the on/run or start position. Insert ...

  • Page 137

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 138

    Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • ac...

  • Page 139

    Cupholders for the driver and front passenger, cupholders are lo- cated on the floor console between the front seats. For rear passengers, there are cupholders located on the floor between the front driver and passenger seats. Front cupholders rear cupholders 3 understanding the features of your veh...

  • Page 140

    Storage glove box compartment the glove box is located on the right side of the instru- ment panel. Pull outward on the door latch to open the glove box. Push the glove box door upward to close it. Passenger seat storage — if equipped some models may be equipped with storage under the front passenge...

  • Page 141

    Cargo area features the rear seatbacks have a fold down feature to allow increased cargo capacity. Push down the release button, located at the outboard top of the seatback and move the seatback to its folded- down position to provide a flat load floor cargo area. When returning the seatback to its ...

  • Page 142

    Rear window features rear window defroster the rear window defroster button is located in the center of the instrument panel, below the radio. Press this button to turn on the rear window defroster. An indicator in the button will illuminate when the rear window defroster is on. The rear window defr...

  • Page 143

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....

  • Page 145: Contents

    Understanding your instrument panel contents ! Instrument panel features . . . . . . . . . .145 ! Instrument cluster — pop, lounge, 500c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 ! Instrument cluster — sport. . . . . . . . . .147 ! Instrument cluster descriptions . . . . .14...

  • Page 146

    ▫ technical specifications . . . . . . . . . . . . . . . . .181 ▫ quick guide . . . . . . . . . . . . . . . . . . . . . . . . .182 ▫ general information. . . . . . . . . . . . . . . . . . . .185 ▫ functions and adjustments . . . . . . . . . . . . . .186 ▫ radio . . . . . . . . . . . . . . . . . . . ...

  • Page 147

    Instrument panel features 1 — side vent 7 — passenger air bag 13 — storage compartment 2 — multifunction lever – light control 8 — glove compartment 14 — shift lever 3 — instrument cluster and warning lights 9 — rear defrost button 15 — sport button 4 — windshield wiper, washer, trip computer 10 — h...

  • Page 148

    Instrument cluster — pop, lounge, 500c 146 understanding your instrument panel.

  • Page 149

    Instrument cluster — sport 4 understanding your instrument panel 147.

  • Page 150

    Instrument cluster descriptions 1. Glow plug light — if equipped this vehicle will inhibit engine cranking when the ambient temperature is less than –22° f (–30° c) and the oil temperature sensor reading indicates an engine block heater has not been used. The glow plug light will flash during in col...

  • Page 151

    Caution! (continued) • do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window. • keep all objects a safe distance from the window. 3. Front fog light indicator — if equipped this indicator will illuminate when the front fog lights are on. 4. Low fue...

  • Page 152

    Failure, external light failure, fuel cut-off intervention, fuel cut-off not available, parking sensor failure. 9. Air bag warning light this light will turn on for four seconds as a bulb check when the ignition switch is first turned to on/run. If the light is either not on during starting, stays o...

  • Page 153

    Vehicle is experiencing a problem with the charging system. Obtain service immediately. See an autho- rized studio. If jump starting is required, refer to “jump starting procedures” in “what to do in emergencies”. 13. Power steering system warning this light is used to manage the electrical warning ...

  • Page 154

    Vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) as an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (tpms) that illuminates a low tire pressure telltale when one or more of your ...

  • Page 155

    Caution! The tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, t...

  • Page 156

    Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the mil after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not require to...

  • Page 157

    Normal, turn the engine off immediately and call for service. Refer to “if your engine overheats” in “what to do in emergencies” for further information. 20. Brake warning light this light monitors various brake functions, including brake fluid level and parking brake application. If the brake warni...

  • Page 158

    The light also will turn on when the parking brake is applied with the ignition switch in the on/run position. Note: this light shows only that the parking brake is applied. It does not show the degree of brake application. 21. Electronic stability control off (esc off) indicator light this light in...

  • Page 159

    Is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the brake warning light is not on. If the abs light is on, the brake system should be serviced as soon as possible to restore the benefits of anti-lock brakes. If the abs ligh...

  • Page 160

    Caution! Driving with a hot engine cooling system could damage your vehicle. If all the segments of the temperature gauge are lit, pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If you hear continuous chimes, t...

  • Page 161

    Service, so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero. Note: if the vehicle is equipped with the electronic vehicle information center (evic) in the instrument cluster, all warnings including “door” and “gate” and ...

  • Page 162

    Electronic vehicle information center (evic) the electronic vehicle information center (evic) fea- tures a driver-interactive display that is located in the instrument cluster. The evic consists of the following: • system status • vehicle information warning message displays • personal settings (cus...

  • Page 163

    Evic displays 1 — temperature indicator 6 — message display 2 — fuel level gauge 7 — coolant temperature gauge 3 — clock 8 — digital speedometer 4 — odometer 9 — ice warning indicator 5 — sport mode 10 — gear shift indicator (gsi) 1 — ice warning indicator 6 — message display 2 — temperature indicat...

  • Page 164

    Evic control buttons press the set esc button briefly to access the menu and/or go to next screen or to confirm the required menu option. Press and hold the set esc button (approxi- mately one second) to return to the main screen. Press the up button to scroll upward through the displayed menu and t...

  • Page 165

    • set date • see radio • speed display • autoclose • units • language • buzzer volume • button volume • daylights (d.R.L.) • hill start • tire pressure • unlock driver door first • unlock all doors • exit menu selecting an option of the main menu without submenu 1. Briefly press the set esc button t...

  • Page 166

    3. Briefly press the set esc button to select the dis- played submenu option and to open the relevant setup menu. 4. Press the up or down button (by single presses) to select the new setting for this submenu option. 5. Briefly press the set esc button to store the new setting and go back to the prev...

  • Page 167

    Note: if the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Trip computer the trip computer is located in the instrument cluster. It features a driver-interactive display (displays informa- tion such as; t...

  • Page 168

    Start of trip procedure with the ignition on, press and hold the trip button for over one second to reset. Exit trip to exit the trip function, wait until all the values have been displayed or hold the set esc button for longer than one second. Briefly press the set esc button to go back to the menu...

  • Page 169

    Values displayed range this indicates the distance which may be travelled with the fuel remaining in the tank, assuming that driving conditions will not change. The message “----” will appear on the display in the following cases: • distance less than 30 miles (or 50 km). • the vehicle is parked for...

  • Page 170

    Personal settings (customer-programmable features) dimmer the evic display is provided with a light sensor capable of detecting environmental light conditions and adjust- ing the brightness of the instruments accordingly. Note: the brightness of the instrument panel may change while travelling follo...

  • Page 171

    3. When the function is activated (on), briefly press the set esc button to display the presently set activation speed. Pressing the up or down buttons selects the speed limit. Press set esc to confirm selection. Note: selection is possible between 20 and 125 mph or km/h, depending on the selected u...

  • Page 172

    2. Press the up or down button to select the setting. 3. Briefly press the set esc button to go back to the menu screen, or press and hold the set esc button (approximately one second) to go back to the main screen without storing the settings. Set time (clock) this function may be used to set the c...

  • Page 173

    • when accessing the “mode” submenu, briefly press the set esc button. The previously set display format will flash on the display. • press the up or down button to select “24h” or “12h.” when you have selected the required settings, briefly press the set esc button to go back to the time, mode sub-...

  • Page 174

    • briefly press the set esc button to go back to the menu screen, or press and hold the set esc button (approximately one second) to go back to the main screen without storing the settings. See radio (repeat audio information) with this function active, the evic display shows infor- mation relevant ...

  • Page 175

    3. Briefly press the set esc button to go back to the menu screen, or press and hold the set esc button (approximately one second) to go back to the main screen. Autoclose with this function active, the doors will automatically lock at when the vehicle’s speed exceeds 15 mph (24 km/h). To change the...

  • Page 176

    4. When accessing the “distance” submenu: briefly press the set esc button. Either “mi” or “km” will appear on the display (according to the previous setting). 5. Press the up or down button for setting. 6. Briefly press the set esc button to return to the sub-menu. 7. When accessing the “fuel econo...

  • Page 177

    Language (selecting the language) the messages can be displayed in the following lan- guages: italian, english, german, portuguese, spanish, french, dutch, polish. To set the required language, proceed as follows: 1. Briefly press the set esc button. The previously set “language” will flash on the d...

  • Page 178

    Button volume (button volume adjustment) this function may be used to adjust the volume of the beep accompanying the buttons. Set esc, up or down buttons can be adjusted according to 8 levels. To adjust the volume, proceed as follows: 1. Briefly press the set esc button. The previously set volume “l...

  • Page 179

    • fuel econ on – turns on a fuel economy upshift light in the instrument cluster, for optimum fuel economy, when operating in base driving mode. • fuel econ off – the fuel economy upshift light is disabled. To set the required unit, proceed as follows: 1. Briefly press the set esc button to display ...

  • Page 180

    3. Briefly press the set esc button to go back to the menu screen, or press and hold the button (approxi- mately one second) to go back to the main screen without storing the settings. Lock when unlock driver door is selected, only the driver’s door will unlock on the first press of the remote keyle...

  • Page 181

    Sales code (rab) radio introduction the radio has been designed according to the specifica- tions of the passenger compartment, with a personalized design to match the style of the dashboard. If the radio has blue&me™, refer to the appropriate “blue&me™ user’s manual” for further information. The in...

  • Page 182

    Warning! Having the volume turned up high can cause the driver to not be able to hear important traffic sounds, i.E. Sirens, horns, etc. This could cause an accident. Always adjust the volume so that you can still hear background noises. Care and maintenance clean the cover with a soft antistatic cl...

  • Page 183

    • the use of original cd media is required for the best quality audio production. Correct operation is not guaranteed when cd-r/rw media are used that were not correctly burned and/or with a maximum capacity above 650 mb. • do not use commercially available protective sheets for cds or discs, with s...

  • Page 184

    With alpine premium audio system (if equipped): • two 165 mm diameter midwoofer speakers. • two 11 mm tweeter speakers in the front pillars. • two 100 mm full range speakers, one speaker in each of the rear side panels. • an amplifier in the trunk on the right-hand side panel. • antenna on the car r...

  • Page 185

    Button general functions mode (mute/ pause button) volume activation/deactivation (mute/pause) short button press audio audio adjustments: low tones (bass), high tones (treble), left/right balance (balance), front/rear balance (fader) menu activation: short button press adjustment type selection: pr...

  • Page 186

    Button radio functions mode radio station search: • automatic search • manual search automatic search: press buttons or (long press for fast forward) manual search: press buttons or (long press for fast forward) 1 2 3 4 5 current radio station storing long button press for memory preset 1 to 5 respe...

  • Page 187

    General information the radio offers the following functions: radio section • pll tuning with fm/am bands • rbds (radio broadcast data system) • automatic/manual station tuning • fm multipath detector • manual storing of 25 stations (base radio) and 40 stations (if equipped with satellite): 15 on fm...

  • Page 188

    Cd/mp3 section • mp3-info function (id3-tag) • folder selection (previous/next) • track selection (forward/backward) • fast forward/rewind through tracks • mp3 display function: display of folder name, id3- tag information, time elapsed since the start of the track, name of the file • playing audio ...

  • Page 189

    • am, fm and satellite bands (if equipped) selecting the cd function by briefly pressing the media button, the cd audio source can be selected (only if a cd is loaded). Volume adjustment to adjust the volume, press the buttons +vol or –vol to increase/decrease the volume. Mute/pause function press t...

  • Page 190

    The functions managed by the audio menu are: • bass (bass adjustment) • treble (treble adjustment) • balance (right/left balance adjustment) • fader (front/rear balance adjustment) • loudness (loudness function activation/ deactivation) • equalizer — if equipped (activation and selection of factory ...

  • Page 191

    By pressing the or buttons briefly, the levels will change progressively. By pressing them down longer, the levels will change quickly. Select the value “0” to set the right and left audio outputs at the same level. Fader adjustment proceed as follows: 1. Press audio button. 2. Press the or button t...

  • Page 192

    Curves can be adjusted. To deactivate the equalizer, select the “eq preset” function in the audio menu. To activate the equalizer, use the audio button or to select one of the adjustments: • “eq user” (adjustment of 7 equalizer bands that can be changed by the user) • “classic” (equalizer preset for...

  • Page 193

    Menu menu button functions press the menu button briefly to activate the menu function. Use the or buttons to scroll through the menu functions. To change the setting of the selected func- tion, use the or buttons. The current status of the selected function appears on the display. The functions man...

  • Page 194

    On volume limit this function makes it possible to activate/deactivate the maximum volume limit when turning the radio on. The display shows the function status: • “on volume limit: on” – when the radio is turned on the volume level will be: – if the volume level is equal to or higher than the maxim...

  • Page 195

    The chosen mode appears on the display: • “radio off: 00 min” — the radio turns off in connec- tion with the ignition key; the radio is turned auto- matically off as soon as the key is turned to the stop position. • “radio off: 20 min” — the radio turns off indepen- dently from the ignition key; the...

  • Page 196

    Frequency band selection with the radio mode active, press the fm or am tuner button briefly and repeatedly to select the desired recep- tion band. Each time the button is pressed the following bands are selected cyclically: • am, fm or sat (if equipped) each band is highlighted by the corresponding...

  • Page 197

    Manual tuning this is used to manually search for stations in the preselected band. Select the desired frequency band and then press briefly and repeatedly the or button to start the search in the desired direction. If the or button is pressed longer, the fast search starts and then stops when the b...

  • Page 198

    Logos are trademarks of siriusxm radio inc. And its subsidiaries. Siriusxm radio requires a subscription, sold separately after trial subscription included with vehicle purchase. Prices and programming are provided by siriusxm and are subject to change. Subscriptions governed by terms & conditions a...

  • Page 199

    Write down the electronic serial number (esn) for your receiver. To retrieve the electronic serial number of siriusxm satellite receiver module tune to channel 0. Make sure that when the order is placed, the esn are correct. If any of the esn numbers are not entered correctly, then the siriusxm subs...

  • Page 200

    The following are instructions for retrieving the elec- tronic serial number (esn) from fiat 500 nafta model radios: to retrieve the esn of sirius satellite receiver module tune to channel 0. Make sure that when the order is placed, the esn are correct. If any of the esn numbers are not entered corr...

  • Page 201

    Cd loading/ejecting to load the cd, insert it gently into the slot to activate the motorized loading system, which will position it cor- rectly. The cd can be loaded with the radio off and the ignition key turned to on/run. In this case, the radio will remain off. When the radio is turned on, the la...

  • Page 202

    Display information when the cd player is operating, information will ap- pear on the display with the following meaning: • “track 5” indicates the cd track number. • “03:42” indicates the time elapsed since the start of the track (if the relevant menu function is activated). Track selection briefly...

  • Page 203

    Note: layer-3 audio decoding technology is licensed from fraunhofer iis and thomson multimedia. Mp3 mode in addition to playing regular audio cds, the radio is also enabled to play cdroms on which compressed audio files have been recorded in an mp3 format. To guarantee optimal reproduction, it is ad...

  • Page 204

    Move to the mp3 session while playing by keeping the cd button pressed for more than two seconds. Note: when the function is activated the radio may take a few seconds to start playing. While checking the disc the display will show “cd reading.” if no mp3 files are detected, the radio will resume pl...

  • Page 205

    • if the mp3 files on a cd-rom are structured in sub-folders their structure is compressed to a single level structure, where the sub-folders are taken to the level of the main folders. Troubleshooting general sound volume low the fader function should be adjusted to the values “f” (front) only to p...

  • Page 206

    Operating instructions — hands-free phone (if equipped) refer to the appropriate “blue&me™ user’s manual” for further information. Personal/portable navigation device (pnd) — if equipped a personal/portable navigation device (pnd) is avail- able as optional equipment for this vehicle, refer to the n...

  • Page 207

    Steering wheel audio controls the remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pr...

  • Page 208

    Radio operation pressing the top of the switch will “seek” up for the next listenable station and pressing the bottom of the switch will “seek” down for the next listenable station. The button located in the center of the left-hand control will tune to the next preset station that you have pro- gram...

  • Page 209

    5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high. Note: if you experience difficulty in playing a particular disc, it may be damaged (i.E., scratched, reflective coating removed, a hair, moistur...

  • Page 210

    Manual heating and air conditioning the manual climate controls consist of a series of rotary dials and one inner push knob. 1. Temperature control rotate this control to regulate the temperature of the air inside the passenger compartment. Rotating the dial to the left into the blue area of the sca...

  • Page 211

    Note: • continuous use of the recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. • the use of the recirculation mode in cold or damp weather could cause windows to fog on the inside, because of moisture buildup inside the veh...

  • Page 212

    To the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. • defrost air is directed through the windshield and side window demister outlets. Use this mode with maximum blower and temperature settings for best windshield and side window defrosting. Not...

  • Page 213

    1. Auto temperature control (atc) button controls airflow, temperature, distribution, and air recir- culation automatically. Press and release to select. Per- forming this function will cause the atc to switch between manual mode and automatic modes. Refer to “automatic operation” for more informati...

  • Page 214

    Reducing moisture on the windshield. Performing this function will cause the atc to switch into manual mode. 6. Front defrost press and release to change the current setting. The indicator illuminates when on. The blower will auto- matically default to medium-high if the defrost mode is selected. Pe...

  • Page 215

    Note: • when in defrost mode, the recirculation button will flash if pressed. This indicates that you can not proceed to this mode due to fogging risk. • when the auto indicator is on and the recirculation indicator is off, the recirculation is in auto mode. If the recirculation indicator is on, the...

  • Page 216

    On low until the engine warms up. The blower will increase in speed and transition into auto mode. Manual operation this system offers a full complement of manual override features. Note: each of these features operates independently from each other. If any feature is controlled manually, temperatur...

  • Page 217

    Floor mode air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Bi-level air is directed through the panel and floor outlets. Press and release the panel mode button and floor mode button to enter bi-level mode, the indicators ill...

  • Page 218

    Outlets. If economy mode is desired, press the a/c button to turn off the a/c mode in the atc display and deactivate the a/c system. Note: • if the system is in mix or defrost mode, the a/c can be turned off, but the a/c system shall remain active to prevent fogging of the windows. • if fog or mist ...

  • Page 219

    Control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the defrost mode. Regular cleaning of the inside of the windows with a non-filming cleaning solution (vinegar and water works very well) will...

  • Page 221: Starting And Operating

    Starting and operating contents ! Starting procedures . . . . . . . . . . . . . . . .223 ▫ manual transmission – if equipped . . . . . . . .223 ▫ automatic transmission – if equipped . . . . . .223 ▫ normal starting. . . . . . . . . . . . . . . . . . . . . . .223 ▫ cold weather operation . . . . . ....

  • Page 222

    ▫ acceleration . . . . . . . . . . . . . . . . . . . . . . . . .239 ▫ traction . . . . . . . . . . . . . . . . . . . . . . . . . . . .239 ! Driving through water . . . . . . . . . . . . .240 ▫ flowing/rising water . . . . . . . . . . . . . . . . . .240 ▫ shallow standing water . . . . . . . . . . . ...

  • Page 223

    ▫ tire pressure . . . . . . . . . . . . . . . . . . . . . . . .268 ▫ tire inflation pressures . . . . . . . . . . . . . . . . .269 ▫ tire pressures for high speed operation . . . .270 ▫ radial ply tires . . . . . . . . . . . . . . . . . . . . . .271 ▫ all season tires – if equipped . . . . . . . . ....

  • Page 224

    ▫ mmt in gasoline . . . . . . . . . . . . . . . . . . . . .288 ▫ materials added to fuel . . . . . . . . . . . . . . . .288 ▫ fuel system cautions. . . . . . . . . . . . . . . . . . .289 ▫ carbon monoxide warnings . . . . . . . . . . . . .290 ! Adding fuel . . . . . . . . . . . . . . . . . . . . . ....

  • Page 225

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children to be in a vehicle unattended is dangerous for a numb...

  • Page 226

    Turn the ignition switch to the avv (start) position and release it when the engine starts. If the engine fails to start within 10 seconds, turn the ignition switch to the stop (off/lock) position, wait 10 to 15 seconds, then repeat the “normal starting” procedure. Cold weather operation to prevent ...

  • Page 227

    Caution! • do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic trans- mission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. • to prevent damage ...

  • Page 228

    Manual transmission — if equipped five-speed manual transmission warning! You or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should al- ways be applied when the driver is not in the vehicle, especially on an incline. F...

  • Page 229

    Note: to shift into reverse from neutral, lift the ring under the knob and, at the same time move the gearshift lever to the right and then backward. Use each gear in numerical order; do not skip a gear. Be sure the transmission is in first gear, not third, when starting from a standing position. Da...

  • Page 230

    Recommended shift speeds to use your manual transmission for optimal fuel economy, it should be upshifted as listed in the following table. Manual transmission recommended shift speeds units in mph (km/h) engine size accel- eration rate 1 to 2 2 to 3 3 to 4 4 to 5 1.4l/ 1.4l turbo engine accel 14 (2...

  • Page 231

    When turning a corner or driving up a steep grade, downshift early so that the engine will not be overbur- dened. Automatic transmission — if equipped caution! Damage to the transmission may occur if the follow- ing precautions are not observed: • shift into park only after the vehicle has come to a...

  • Page 232

    Warning! (continued) • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into park, turn the engine off, and r...

  • Page 233

    When the ignition is in the off position, and once removed, the shift lever is locked in park. Brake/transmission shift interlock system this vehicle is equipped with a brake transmission shift interlock system (btsi) that holds the shift lever in park unless the brakes are applied. To move the shif...

  • Page 234

    Only shift from drive to park or reverse when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has park, reverse, neu- tral, drive, and autostick® shift positions. Manual shifts ...

  • Page 235

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • your vehicle could move and injure you and others if it is not completely in park. Check by trying to mo...

  • Page 236

    Warning! (continued) • when leaving the vehicle, always remove the igni- tion key and lock your vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be ...

  • Page 237

    • with brake pedal released, verify that the shift lever will not move out of park. Reverse this range is for moving the vehicle backward. Shift into reverse only after the vehicle has come to a complete stop. Neutral use this range when the vehicle is standing for prolonged periods with the engine ...

  • Page 238

    Automatically upshifts through all forward gears. The drive position provides optimum driving characteris- tics under all normal operating conditions. When frequent transmission shifting occurs (such as when operating the vehicle under heavy loading condi- tions, in hilly terrain, or traveling into ...

  • Page 239

    In the event of a momentary problem, the transmission can be reset to regain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift the transmission into park. 3. Turn the ignition switch to the lock/off position. 4. Wait approximately 10 seconds. 5. Restart the engine. 6...

  • Page 240

    Note: in autostick® mode, the transmission will only shift up or down when the driver moves the shift lever rearward (+) or forward (-), except as described below. • the transmission will automatically downshift as the vehicle slows (to prevent engine lugging) and will display the current gear. • th...

  • Page 241

    Autostick® position at any time without taking your foot off the accelerator pedal. Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. Driving on slippery surfaces a...

  • Page 242

    2. Slow down if the road has standing water or puddles. 3. Replace the tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5. Maintain sufficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. Driving through w...

  • Page 243

    Caution! • always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • determine the condition of the road or the path that is under water and if there are any obstacles in the wa...

  • Page 244

    Warning! • driving through standing water limits your vehi- cle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water. • driving through standing water limits your vehi- cle’s braking capabilities, which increases stopping distances. Therefore, after driving throu...

  • Page 245

    If the steering icon is displayed and the “power steer- ing system over temp” message is displayed on the evic screen, they indicate that extreme steering maneu- vers may have occurred which caused an over tempera- ture condition in the power steering system. Once driv- ing conditions are safe, pull...

  • Page 246

    Parking brake before leaving the vehicle, make sure that the parking brake is fully applied. Also, be certain to leave manual transmission in reverse or first gear. The parking brake lever is located in the center console. To apply the parking brake, pull the lever up as firmly as possible. To relea...

  • Page 247

    When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. The parking brake should always be applied whenever the driver is not in the vehicle. Warning! • never leave children alone in a vehicle, or with access to ...

  • Page 248

    Caution! If the brake warning light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized studio immediately. Sport mode manual transmission – if equipped the sport mode increases steering feedback to the driver with slig...

  • Page 249

    Automatic transmission – if equipped the sport mode increases steering feedback to the driver with slight increase in effort and changes the transmis- sion shift schedules for more aggressive shifting. This driving mode is useful while driving on twisty roads where more steering precision is desired...

  • Page 250

    Brake system in the event power assist is lost for any reason (for example; repeated brake applications with the engine off), the brakes will still function. The effort required to brake the vehicle will be significantly more than that required with the power system operating. If either the front or...

  • Page 251

    Warning! • pumping the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just press firmly on your brake pedal when you need to slow down or stop. • the anti-lock brake system (abs) cannot prevent the natural laws of physics f...

  • Page 252

    Anti-lock brake system (abs) this system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressure to prevent wheel lockup and help avoid skidding on slippery surfaces during braking. Refer to “four-wheel anti-lock brake system” in ...

  • Page 253

    Traction control system (tcs) this system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability. A feature of the tcs system functions si...

  • Page 254

    Warning! There may be situations on minor hills (i.E., less than 8%), with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking ...

  • Page 255

    • understeer - when the vehicle is turning less than appropriate for the steering wheel position. Note: the esc off switch is located left of the steering column (manual transmission only). Esc off switch (automatic transmission) esc off switch (manual transmission) 5 starting and operating 253.

  • Page 256

    Warning! The electronic stability control (esc) cannot pre- vent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. Esc cannot prevent all accidents, including those resulting from excessive speed in turns, driving on very...

  • Page 257

    To turn esc on again, momentarily press the switch again. This will restore the normal esc on mode of operation. Note: to improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, it may be desirable to switch to the partial off mode by pressing the ...

  • Page 258

    If the esc activation/malfunction indicator light comes on continuously with the engine running, a malfunction has been detected in the esc system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/...

  • Page 259

    Tire safety information tire markings note: • p (passenger) - metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european-metric tire sizing is based on european design standar...

  • Page 260

    • temporary spare tires are spares designed for tempo- rary emergency use only. Temporary high pressure compact spare tires have the letter “t” or “s” molded into the sidewall preceding the size designation. Ex- ample: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards a...

  • Page 261

    Example: r = construction code — #r# means radial construction — #d# means diagonal or bias construction 15 = rim diameter in inches (in) service description: 95 = load index — a numerical code associated with the maximum load a tire can carry h = speed symbol — a symbol indicating the range of spee...

  • Page 262

    Example: load identification: $ ....Blank....$ = absence of any text on the sidewall of the tire indicates a standard load (sl) tire extra load (xl) = extra load (or reinforced) tire light load (ll) = light load tire c, d, e, f, g = load range associated with the maximum load a tire can carry at a s...

  • Page 263

    Example: dot ma l9 abcd 0301 dot = department of transportation — this symbol certifies that the tire is in compliance with the u.S. Department of transportation tire safety standards and is approved for highway use ma = code representing the tire manufacturing location (two digits) l9 = code repres...

  • Page 264

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or ...

  • Page 265

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. B-pillar location for tire and loading information placard 5 starting and operating 263.

  • Page 266

    Tire and loading information placard this placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires. Loa...

  • Page 267

    To determine the maximum loading conditions of your vehicle, locate the statement “the combined weight of occupants and cargo should never exceed xxx lbs or xxx kg” on the tire and loading information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) ...

  • Page 268

    Note: • the following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry ...

  • Page 269

    5 starting and operating 267.

  • Page 270

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 271

    Warning! (continued) • unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy improper inflation pressures can cause uneven wear pat- terns...

  • Page 272

    Caution! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always cold tire inflation pressure. Cold tire inflat...

  • Page 273

    Speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle opera- tion. Refer to your authorized tire or original equipment vehicle studio for recommended safe operating speeds, loading and cold ti...

  • Page 274

    Consult an authorized tire dealer for tire repairs and additional information. Damaged run flat tires, or run flat tires that have experienced a loss of pressure should be replaced imme- diately with another run flat tire of identical size and service description (load index and speed code). All sea...

  • Page 275

    Original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pressures. While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires. Some states pro- hibit s...

  • Page 276

    Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. Do not install more than one compact spare tire/wheel on the vehicle at any given time. Caution! Because of the reduced ground clearance, d...

  • Page 277

    These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to replacement tires in this section for further informa- tion. Life of tir...

  • Page 278

    Warning! Tires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with...

  • Page 279

    Warning! • do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can caus...

  • Page 280

    Note: do not use tire chains on a compact spare tire. Caution! To avoid damage to your vehicle or tires, observe the following precautions: • use security chain company (scc) scc z6 low profile or equivalent chains on 185/55r15 tires only. • because of restricted chain clearance between tires and ot...

  • Page 281

    Tire rotation recommendations the tires on the front and rear of your vehicle operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires. The benefits of rotation a...

  • Page 282

    Tire pressure monitoring system (tpms) the tire pressure monitor system (tpms) will warn the driver of a low tire pressure based on the vehicle recom- mended cold tire pressure. The tire pressure will vary with temperature by about 1 psi (6.9 kpa) for every 12° f (6.5° c). This means that when the o...

  • Page 283

    For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressure of 30 psi (207 kpa). If the ambient temperature is 68° f (20° c) and the measured tire pressure is 27 psi (186 kpa), a temperature drop to 20° f (-7° c) will decrease the tire pressure to approxima...

  • Page 284

    Note: • the tpms is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • the tpms should not be used as a tire pressure gauge while adjusting your tire pressure. • driving on a significantly under-inflated tire causes the tire to overheat ...

  • Page 285

    The tpms consists of the following components: • receiver module • four tire pressure monitoring sensors • tire pressure monitoring telltale light tire pressure monitoring low pressure warnings the tire pressure monitoring telltale light will illumi- nate in the instrument cluster, an audible chime ...

  • Page 286

    3. Snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with tpm sensors. Note: your vehicle is equipped with a compact spare wheel and tire assembly. 1. The compact spare tire does not have a tire pressure monitoring sensor. Theref...

  • Page 287

    Enhanced system– if equipped when the vehicle is equipped with an enhanced tpm system, the driver can view text messages showing the actual tire pressure value by position by selecting the tire pressure menu command in the instrument cluster. Refer to the instrument panel features section of the own...

  • Page 288

    Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is required. Poor quality gasoline can cause problems such as hard starting, stalling and hesitations. If you experience these symptoms, tr...

  • Page 289

    The manufacturer supports the use of reformulated gaso- lines. Properly blended reformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. Gasoline/oxygenate blends some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol...

  • Page 290

    To fix a non-ffv vehicle inadvertently fueled once with e-85 perform the following: • drain the fuel tank (see your authorized studio) • change the engine oil and oil filter • disconnect and reconnect the battery to reset the engine controller memory more extensive repairs will be required for prolo...

  • Page 291

    Fuel system cautions caution! Follow these guidelines to maintain your vehicle’s performance: • the use of leaded gas is prohibited by federal law. Using leaded gasoline can impair engine perfor- mance and damage the emissions control system. • an out-of-tune engine or certain fuel or ignition malfu...

  • Page 292

    Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such...

  • Page 293

    Adding fuel fuel filler cap (gas cap) the gas cap is located on the passenger side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is the correct one for this vehicle. Caution! • damage to the fuel system or emission control system could result from using an improper f...

  • Page 294

    Warning! (continued) • never add fuel when the engine is running. It may cause the mil to turn on and could cause a fire. • a fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. Not...

  • Page 295

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheels off the ground manual transmission automatic transmission flat tow none transmission in neutral not allowed dolly tow front ok ok rear not allowed not allowed on trailer all ok ok 5 starti...

  • Page 296

    Note: vehicles equipped with manual transmissions may be recreationally towed (flat towed) at any legal highway speed, for any distance, if the manual transmis- sion is in neutral. Caution! Do not flat tow any vehicle equipped with an automatic transmission. Damage to the drivetrain will result. If ...

  • Page 297: Contents

    What to do in emergencies contents ! Hazard warning flashers . . . . . . . . . . .297 ! If your engine overheats . . . . . . . . . . . .297 ! Tirefit kit — if equipped . . . . . . . . . . . . .298 ▫ tirefit storage . . . . . . . . . . . . . . . . . . . . . .299 ▫ tirefit kit components and operation...

  • Page 298

    ! Towing a disabled vehicle . . . . . . . . . . .327 ▫ automatic transmission . . . . . . . . . . . . . . . . .328 ▫ manual transmission . . . . . . . . . . . . . . . . . . .329 ! Enhanced accident response system . . .329 296 what to do in emergencies.

  • Page 299

    Hazard warning flashers the hazard warning flasher switch is located on the instrument panel below the radio. Press the switch to turn on the hazard warning flashers. When the switch is activated, all direc- tional turn signals will flash on and off to warn oncoming traffic of an emergency. Press th...

  • Page 300

    Caution! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the h (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the n...

  • Page 301

    Tirefit storage the tirefit kit is located under the front driver’s seat. Tirefit kit components and operation 1. Sealant bottle 2. Deflation button tirefit kit location tirefit components 6 what to do in emergencies 299.

  • Page 302

    3. Pressure gauge 4. Power button 5. Mode select knob 6. Sealant hose (clear) 7. Air pump hose (black) 8. Power plug tirefit usage precautions • replace the tirefit sealant bottle (1) and sealant hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the s...

  • Page 303

    • do not lift or carry the tirefit kit by the hoses. Warning! • do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off the road to avoid the danger of being hit when using the tirefit kit. • do not use tirefit or drive the vehicle under the following circums...

  • Page 304

    Warning! (continued) • take care not to allow the contents of tirefit to come in contact with hair, eyes, or clothing. Tire- fit is harmful if inhaled, swallowed, or absorbed through the skin. It causes skin, eye, and respira- tory irritation. Flush immediately with plenty of water if there is any c...

  • Page 305

    (b) setting up to use tirefit: 1. Turn the mode select knob (5) to the sealant mode position. 2. Uncoil the sealant hose (6) and then remove the cap from the fitting at the end of the hose. 3. Place the tirefit kit flat on the ground next to the deflated tire. 4. Remove the cap from the valve stem a...

  • Page 306

    The sealant hose (6) to the valve stem. Check that the mode select knob (5) is in the sealant mode position and not air mode. Press the power button (4) to turn on the tirefit kit. 2. Connect the power plug (8) to a different 12 volt power outlet in your vehicle or another vehicle, if available. Mak...

  • Page 307

    If the tire does not inflate to at least 26 psi (1.8 bar) pressure within 15 minutes: • the tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. Note: if the tire becomes over-inflated, press the defla- tion button to reduce the tire pressure to the recom- men...

  • Page 308

    Warning! Tirefit is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using tirefit. Do not exceed 55 mph (88 km/h) until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, ...

  • Page 309

    2. Disconnect the tirefit kit from the valve stem, reinstall the cap on the valve stem and unplug from 12 volt outlet. 3. Place the tirefit kit in its proper storage area in the vehicle. 4. Have the tire inspected and repaired or replaced at the earliest opportunity at an authorized studio or tire s...

  • Page 310

    6. Verify that the cap is installed on the fitting at the end of the sealant hose (6) and return the hose to its storage area (located on the bottom of the air pump). 7. Return the tirefit kit to its storage location in the vehicle. Jacking and tire changing — if equipped warning! • do not attempt t...

  • Page 311

    Jack location the jack and jack wrench tool are stowed in a bag under the front driver’s seat. Spare tire removal the spare tire is stowed to the underbody below the cargo area. 1. Remove the plug located in the rear cargo area. Jack and jack-handle location winch access plug right side location 6 w...

  • Page 312

    2. Fit the wrench tool over the drive nut. Use the wrench to rotate the nut counterclockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire out from under the vehicle. Caution! The winch mechanism is designed for use with the jack wrench tool only. Use ...

  • Page 313

    3. Pull the spare tire out from under the vehicle. 4. When the spare is clear, remove the knob or plastic molded nut by rotating it counter-clockwise. Spare tire plastic molded nut 6 what to do in emergencies 311.

  • Page 314

    5. Tilt the retainer at the end of the cable and pull it through the center of the wheel. Preparations for jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough...

  • Page 315

    6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. Note: passengers should not remain in the vehicle while the vehicle is being jacked. Jacking instructions warning! Carefully follow these ...

  • Page 316

    Warning! (continued) • only use the jack in the positions indicated and for lifting this vehicle during a tire change. • if working on or near a roadway, be extremely careful of motor traffic. • to assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve s...

  • Page 317

    Note: there are front and rear jacking locations on each side of the body (as indicated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is securely engaged. Front jacking location rear jacking location 6 what to do in emergencies 315.

  • Page 318

    3. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Warning! Raising the vehicle higher than necessary ...

  • Page 319

    Note: before using the swivel wrench to remove the wheel bolts be sure to remove the center cap of the wheel by inserting the angled tab end of the swivel wrench into the notched part of the center cap. 5. Remove the wheel bolts and pull the wheel off the hub. For vehicles equipped with aluminum whe...

  • Page 320

    Warning! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. Note: the wheel cover is held on the wheel by the wheel bolts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the wheel cover onto the...

  • Page 321

    Warning! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. 10. Place the deflated (flat) tire in the cargo area. Have the tire repaired or replaced as soon as possible. ...

  • Page 322

    Jump-starting procedure if your vehicle has a discharged battery, it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improperly so please follow the procedures in this section caref...

  • Page 323

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You co...

  • Page 324

    3. Remove the protective cover over the remote positive (+) battery post. To remove the cover, press the locking tab and pull upward on the cover. 4. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition ...

  • Page 325

    3. Connect the negative end (-) of the jumper cable to the negative (-) post of the booster battery. 4. Connect the opposite end of the negative (-) jumper cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery and the fuel injection system. Warni...

  • Page 326

    Caution! Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough without engine operation, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prev...

  • Page 327

    Caution! • when “rocking” a stuck vehicle by shifting be- tween drive/2nd gear and reverse, do not spin the wheels faster than 15 mph (24 km/h), or drive- train damage may result. • revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damag...

  • Page 328

    3. Remove the shift lever override access cover (located on the right side of the shift lever housing) by prying at the bottom edge of the cover. 4. Press and maintain firm pressure on the brake pedal. 5. Insert a small screwdriver or similar tool into the access hole, and push and hold the override...

  • Page 329

    Towing a disabled vehicle this section describes procedures for towing a disabled vehicle using a commercial wrecker service. Towing condition wheels off the ground automatic transmission manual transmission flat tow none if transmission is operable: • transmission in neutral • 30 mph (48 km/h) max ...

  • Page 330

    Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equip- ment manufacturer’s instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main structural members ...

  • Page 331

    Caution! (continued) • towing this vehicle in violation of the above re- quirements can cause severe transmission damage. Damage from improper towing is not covered un- der the new vehicle limited warranty. Manual transmission • vehicle can be flat towed (all four wheels on the ground) with the tran...

  • Page 332

    • turn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • unlock the doors automatically. After the event occurs, when the system is active, the message #fuel cutoff see handbook# is displayed. Carefully check the vehicle for fuel leaks i...

  • Page 333

    Customer action customer will see 5. Turn right turn signal switch on. Right turn light is on solid. Left turn light blinks. 6. Turn left turn signal switch on. Left turn light is on solid. Right turn light is on solid. 7. Turn left turn signal switch off. (turn signal switch must be placed in neutr...

  • Page 335: Maintaining Your Vehicle

    Maintaining your vehicle contents ! Engine compartment — 1.4l . . . . . . . . . .335 ! Engine compartment — 1.4l turbo . . . .336 ! Onboard diagnostic system — obd ii . . .337 ! Emissions inspection and maintenance programs . . . . . . . . . . . . .337 ! Replacement parts . . . . . . . . . . . . . ....

  • Page 336

    ▫ automatic transmission – if equipped . . . . . .365 ▫ appearance care and protection from corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . .367 ▫ convertible top care – if equipped . . . . . . . .373 ! Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375 ▫ interior fus...

  • Page 337

    Engine compartment — 1.4l 1 — engine coolant reservoir 5 — battery 2 — engine oil dipstick 6 — air cleaner filter 3 — brake fluid reservoir 7 — engine oil fill 4 — front distribution unit (fuses) 8 — washer fluid reservoir 7 maintaining your vehicle 335.

  • Page 338

    Engine compartment — 1.4l turbo 1 — engine coolant reservoir 5 — battery 2 — engine oil dipstick 6 — engine oil fill 3 — brake fluid reservoir 7 — washer fluid reservoir 4 — front distribution unit (fuses) 336 maintaining your vehicle.

  • Page 339

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 340

    Indicator light (mil)” is functioning and is not on when the engine is running, and that the obd ii system is ready for testing. Normally, the obd ii system will be ready. The obd ii system may not be ready if your vehicle was recently serviced, recently had a dead battery or a battery replace- ment...

  • Page 341

    You may need to do nothing more than drive your vehicle as you normally would in order for your obd ii system to update. A recheck with the above test routine may then indicate that the system is now ready. Regardless of whether your vehicle’s obd ii system is ready or not, if the mil is illuminated...

  • Page 342

    Maintenance procedures the pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides those maintenance items specified in the fixed maintenance schedule, there are other components which may require servicing or replacement in the futu...

  • Page 343

    Fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading. Checking the oil while the vehicle is on level ground, and about five minutes after a fully warmed engi...

  • Page 344

    Engine oil selection for best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are api certified and meet the requirements of chrysler material standard ms-6395. American petroleum institute (api) engine oil identification ...

  • Page 345

    Engine oil filler cap location, refer to “engine compart- ment” in “maintaining your vehicle” for further informa- tion. Engine oil viscosity - 1.4l turbo (sae grade) sae 5w-40 full synthetic engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting ...

  • Page 346

    Station or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your area. Engine oil filter the engine oil filter should be replaced with a new filter at every engine oil change. Engine oil filter selection this manufacturer’s engines have a full-flow ...

  • Page 347

    Maintenance-free battery your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- tenance required. Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or...

  • Page 348

    Caution! • it is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be ...

  • Page 349

    Warning! • use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Re...

  • Page 350

    1. Remove the t20 torx screw that secures the passenger side console closeout cover. 2. Pull the console closeout cover rearward to disengage the front retaining tab and remove the cover. 3. Remove the two 5.5 mm screws (1 and 2) that secure the particulate air filter cover to the hvac housing. T20 ...

  • Page 351

    4. Remove the a/c air filter by pulling it straight out of the housing. Take note of the air filter position indica- tors. 5. Install the a/c air filter with the air filter position indicators pointing in the same direction as removal. A/c air filter 7 maintaining your vehicle 349.

  • Page 352

    Caution! The a/c air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it more often. 6. Install the passenger side console closeout. Refer to the “maintenance schedule” for the proper mainte...

  • Page 353

    Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield or rear window. Avoid using the wiper blades to remove frost or ice from the windshield or rear window. Make s...

  • Page 354

    Note: the rear wiper arm cannot be raised fully up- ward unless the pivot cap is raised first. 2. Lift the rear wiper arm upward to raise the wiper blade off of the liftgate glass. 3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. ...

  • Page 355

    5. Lower the wiper blade and snap the pivot cap into place. Adding washer fluid the windshield washer fluid reservoir is located in the engine compartment, and the fluid level should be checked at regular intervals. Fill the reservoir with wind- shield washer solvent (not engine coolant/ antifreeze)...

  • Page 356

    Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing co, refer to “safety tips/exhaust gas” in “things to know before starting your vehicle” for further...

  • Page 357

    Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. Note: intentional tampering with emissions control systems can result in c...

  • Page 358

    Cooling system warning! • when working near the radiator cooling fan, disconnect the fan motor lead or turn the ignition switch to the off position. The fan is temperature controlled and can start at any time the ignition switch is in the on position. • you or others can be badly burned by hot engin...

  • Page 359

    Refer to the “maintenance schedule” for the proper maintenance intervals. Selection of coolant refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oa...

  • Page 360

    Caution! (continued) • do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • this vehicle has not been designed for use with...

  • Page 361

    • use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain ...

  • Page 362

    Warning! (continued) • do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result. Disposal of used engine coolant used ethylene glycol-based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your lo...

  • Page 363

    Points to remember note: when the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is nor- mally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vapor- ized when th...

  • Page 364

    Brake system in order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “maintenance schedule” for the proper maintenance intervals. Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot rest...

  • Page 365

    Note: if your vehicle is equipped with a manual trans- mission , the brake fluid reservoir supplies fluid to both the brake system and the clutch release system. The two systems are separated in the reservoir, and a leak in one system will not affect the other system. The manual transmission clutch ...

  • Page 366

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 367

    Manual transmission – if equipped lubricant selection use only the manufacturers recommended transmission fluid. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for further information. Fluid level check check the fluid level by removing the fill plug. The fluid level ...

  • Page 368

    Caution! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Refer to “fluids, lubricants, and genuine parts” in “maintaining your vehicle” for fluid speci- fications. Special additives th...

  • Page 369

    The transmission fluid level checked. Operating the ve- hicle with an improper fluid level can cause severe transmission damage. Caution! • if a transmission fluid leak occurs, visit your au- thorized studio immediately. Severe transmission damage may occur. Your authorized studio has the proper too...

  • Page 370

    What causes corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • road salt, dirt and moisture accumulation. • stone and gravel impact. • insects, tree sap and tar. • salt in the air near seacoast localities. ...

  • Page 371

    Special care • if you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • it is important that the drain holes in the lower edges of the doors, rocker panels, and trunk be kept clear and open. • if you detect any stone chips or scratches...

  • Page 372

    Caution! Do not use scouring pads, steel wool, a bristle brush, or metal polishes. Do not use oven cleaner. These products may damage the wheel’s protective finish. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheel’s pro- tective finish. Only mopar® whee...

  • Page 373

    Can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and mopar® total clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, c...

  • Page 374

    When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror. Instrument panel cover the instrument panel cover has a low glare surface which minimizes reflections on the windshield. Do not use protectants or other products whi...

  • Page 375

    Replace the belts if they appear frayed or worn or if the buckles do not work properly. Convertible top care – if equipped note: lubricate the top rails with berulub fr 43 every 2000 cycles or if scratching noises due to dust are present. Caution! Failure to follow these cautions may cause interior ...

  • Page 376

    Caution! Avoid high-pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. General cleaning careful vacuuming of the top before washing is helpful in removing dust and other foreign particles. Wash in partial shade instead of...

  • Page 377

    Fuses interior fuses the interior fuse panel is part of the body control module (bcm) and is located on the driver’s side under the instrument panel. Cavity vehicle fuse number mini fuse description 1 f12 7.5 amp brown right low beam 2 f32 5 amp tan front and rear ceiling lights trunk and door court...

  • Page 378

    Cavity vehicle fuse number mini fuse description 6 f43 20 amp yellow bi-directional washer 7 f48 20 amp yellow passenger power window 8 f13 7.5 amp brown left low beam, headlamp leveling 9 f50 7.5 amp brown airbag 10 f51 5 amp tan car radio switch, climate control system, stop light, clutch cavity v...

  • Page 379

    The id number of the electrical component correspond- ing to each fuse can be found on the back of the cover. Cavity maxi fuse mini fuse description f01 60 amp blue body controller f02 20 amp yellow audio amplifier f03 20 amp yellow ignition switch f04 40 amp orange anti-lock brake pump f05 70 amp t...

  • Page 380

    Cavity maxi fuse mini fuse description f07 40 amp orange radiator fan - high speed f08 30 amp green blower motor f09 10 amp red powertrain f10 10 amp red horn f11 15 amp blue powertrain f11 10 amp red powertrain (multi- air – if equipped) f14 5 amp tan high beam (shutter) cavity maxi fuse mini fuse ...

  • Page 381

    Cavity maxi fuse mini fuse description f20 15 amp blue heated seats – if equipped f21 15 amp blue fuel pump f23 20 amp yellow anti-lock brake valves f24 7.5 amp brown stability control system f30 15 amp blue fog lamps f82 30 amp green sunroof/ convertible top f84 10 amp red transmission cavity maxi ...

  • Page 382

    Vehicle storage if you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • disconnect the negative cable from the battery. • anytime you store your vehicle, or keep it out of service (i.E., vacation) for two weeks or more, run the air c...

  • Page 383

    Bulb number side direction lamps w5w rear turn signal lamps py21w rear side marker lamps w3w rear tail and stop lamps py21w/5w rear backup lamps w16w center high mounted stop lamp w5w license plate lamps led (see authorized studio) note: numbers refer to commercial bulb types that can be purchased f...

  • Page 384

    Front turn signal, parking and daytime running lamps 1. Turn the steering wheel completely to the left or right. 2. Open the wheel housing access door. 3. Remove the plastic cap from the back of the lamp housing. 4. Rotate bulb/socket counter-clockwise. 5. Remove the bulb and replace as needed. 6. I...

  • Page 385

    3. Pull the bulb from the socket and insert the replace- ment bulb. 4. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place. 5. Reinstall the wheel liner. Rear tail, stop, backup and turn signal lamps 1. Open the liftgate. 2. Remove the two screw...

  • Page 386

    Center high mounted stop lamp (chmsl) 1. Remove the two guard caps and the two fastening screws. 2. Remove the center high mounted stop lamp assembly. 3. Disconnect the electric connector. 4. Press the retaining device and open the bulb holder. 5. Remove the snap-fitted bulb to be replaced and re- p...

  • Page 387

    Fluid capacities u.S. Metric fuel (approximate) 10.5 gallons 40 liters engine oil with filter 1.4l/1.4l turbo engine 4 quarts 3.8 liters cooling system 1.4 liter engine (mopar® antifreeze/engine coolant 10 year/150,000 mile formula) — with manual transmission 4.6 quarts 4.4 liters 1.4 liter engine (...

  • Page 388

    Fluids, lubricants and genuine parts engine component fluid, lubricant, or genuine part engine coolant - 1.4l/1.4l turbo engine we recommend you use mopar® antifreeze/coolant 10 year/150,000 mile formula oat (organic additive technology). Engine oil - 1.4l engine we recommend you use api certified s...

  • Page 389

    Chassis component fluid, lubricant, or genuine part manual transmission – if equipped we recommend you use mopar® c635 ddct/mtx transmission fluid automatic transmission – if equipped we recommend you use mopar® aw-1 transmission fluid brake master cylinder we recommend you use mopar® dot 3, sae j17...

  • Page 391: Maintenance Schedules

    Maintenance schedules contents ! Maintenance schedule . . . . . . . . . . . . .390 ▫ maintenance chart . . . . . . . . . . . . . . . . . . . .392 8.

  • Page 392

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This...

  • Page 393

    Required maintenance intervals . Refer to the maintenance schedules on the following page for the required maintenance intervals. At every oil change interval as indicated by oil change indicator system: • change oil and filter • rotate the tires. Rotate at the first sign of irregu- lar wear, even i...

  • Page 394

    Maintenance chart refer to the maintenance schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 1...

  • Page 395

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 110,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 112,000 128,000 144,000 160,000 176,000 192,000 208,000...

  • Page 396

    ** the spark plug change interval is mileage based only, yearly intervals do not apply. Warning! • you can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a servi...

  • Page 397: Contents

    If you need consumer assistance contents ! Suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . .396 ▫ prepare for the appointment. . . . . . . . . . . . .396 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . .396 ▫ be reasonable with requests . . . . ....

  • Page 398

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager....

  • Page 399

    Facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. This is why you should always talk to an authorized studio service manager first. Most matters can be re- solved with this process. • if for some reason...

  • Page 400

    Canadian residents with hearing difficulties that require assistance can use the special needs relay service offered by bell canada. For tty teletypewriter users, dial 711 and for voice callers, dial 1 800 855-0511 to connect with a bell relay service operator. Service contract you may have purchase...

  • Page 401

    Warning! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the state of california to cause cancer and birth defects, or other reproductive harm. In addi- tion, certain fluids contained in vehicles and certain products of component wear con...

  • Page 402

    West building, washington, d.C. 20590. You can also obtain other information about motor vehicle safety from http://www.Safercar.Gov. In canada if you believe that your vehicle has a safety defect, you should contact the customer service department imme- diately. Canadian customers who wish to repor...

  • Page 403

    Problems the first time, using step-by-step troubleshoot- ing and drivability procedures, proven diagnostic tests and a complete list of all tools and equipment. Owner’s manuals these owner’s manuals have been prepared with the assistance of service and engineering specialists to ac- quaint you with...

  • Page 404

    Significantly from the norm due to variations in driving habits, service practices, and differences in road charac- teristics and climate. Traction grades the traction grades, from highest to lowest, are aa, a, b, and c. These grades represent the tire’s ability to stop on wet pavement, as measured ...

  • Page 405

    Warning! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure. 9 if you need consumer assistance 403.

  • Page 407: Index

    Index 10

  • Page 408

    Adding engine coolant (antifreeze) . . . . . . . . . . . .358 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291 adding washer fluid . . . . . . . . . . . . . . . . . . . . . .353 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . . .288 airbag. . . . . . . . . ....

  • Page 409

    Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345 jump starting . . . . . . . . . . . . . . . . . . . . . . . . . .320 keyless transmitter replacement (rke) . . . . . . . .20 belts, seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 body mechanism lubricat...

  • Page 410

    Cleaning wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369 windshield wiper blades . . . . . . . . . . . . . . . . . .350 climate control . . . . . . . . . . . . . . . . . . . . . . . . . .207 clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362 clutch fl...

  • Page 411

    Downshifting . . . . . . . . . . . . . . . . . . . . . . . . . . . .228 driving through flowing, rising, or shallow standing water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240 electrical power outlets. . . . . . . . . . . . . . . . . . . . .134 electric remote mirrors. . . . . ...

  • Page 412

    Exhaust gas caution. . . . . . . . . . . . . . . . . . . . . . . .29 exhaust system . . . . . . . . . . . . . . . . . . . . . . . . . . .80 exterior lights . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 filler location fuel . . . . . . . . . . . . . . . . . . . . . . . .159 filters air cl...

  • Page 413

    Fueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291 fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375 gas cap (fuel filler cap) . . . . . . . . . . . . . . . . . . .291 gasoline, clean air . . . . . . . . . . . . . . . . . . . . . . . .286 gasoline (...

  • Page 414

    Immobilizer (sentry key) . . . . . . . . . . . . . . . . . . . .13 infant restraint . . . . . . . . . . . . . . . . . . . . . . . . . . .59 information center, vehicle . . . . . . . . . . . . . . . . . .160 instrument cluster . . . . . . . . . . . . . . . . . . . . . . . .148 instrument panel and co...

  • Page 415

    Engine temperature warning . . . . . . . . . . . . . . .154 exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 fog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149 high beam . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 high beam indicator . . ....

  • Page 416

    Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 automatic dimming . . . . . . . . . . . . . . . . . . . . . .93 electric powered . . . . . . . . . . . . . . . . . . . . . . . . .94 heated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 modifications/altera...

  • Page 417

    Passing light . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 pets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 placard, tire and loading information . . . . . . . . . .264 power door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 mirrors . . ....

  • Page 418

    Rotation, tires . . . . . . . . . . . . . . . . . . . . . . . . . . .279 safety checks inside vehicle . . . . . . . . . . . . . . . . . .81 safety checks outside vehicle . . . . . . . . . . . . . . . . .83 safety defects, reporting . . . . . . . . . . . . . . . . . . . .399 safety, exhaust gas. . . ...

  • Page 419

    Spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .386 speed control (cruise control). . . . . . . . . . . . . . . .122 speedometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 sport mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246 starting . . . . ....

  • Page 420

    High speed . . . . . . . . . . . . . . . . . . . . . . . . . . .270 inflation pressures . . . . . . . . . . . . . . . . . . . . . . .269 jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308 life of tires . . . . . . . . . . . . . . . . . . . . . . . . . . .275 load capacity . . ....

  • Page 421

    Uci connector . . . . . . . . . . . . . . . . . . . . . . . . . . .204 uniform tire quality grades . . . . . . . . . . . . . . . . .401 universal consumer interface (uci) connector . . . .204 unleaded gasoline . . . . . . . . . . . . . . . . . . . . . . . .285 untwisting procedure, seat belt . . . ....

  • Page 422

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be obs...

  • Page 423

    Chrysler group llc o w n e r ’ s m a n u a l 2 0 1 3 2013 fia t 500 13ff500-126-ae fifth edition rev 1 printed in u.S.A. Fiat 500