1. DL manuals
  2. Fiat
  3. Automobile
  4. 500L 2017
  5. Owner's Manual

Fiat 500L 2017 Owner's Manual

Other manuals for 500L 2017: User Manual

Summary of 500L 2017

  • Page 1

    O w n e r ’ s m a n u a l 2 0 1 7 2017 fia t ® 500l first edition rev 1 printed in u.S.A. ©2016 fca us llc. All rights reserved. Fiat is a registered trademark of fca group marketing s.P.A., used under license by fca us llc. 17bf-126-aa fiat ® 500l.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name fca us llc shall be deemed to be deleted and the name fca canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability can be serious...

  • Page 3

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 understa...

  • Page 5

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . .4 䡵 how to use this manual . . . . . . . . . . . . .4 䡵 warnings and cautions . . . . . . . . . . . . .6 䡵 vehicle identification number . . . . . . .6 䡵 vehicle modifications/alterations . . .7 1.

  • Page 6

    Introduction congratulations on selecting your new vehicle. Be assured that it represents precision workmanship, dis- tinctive styling, and high quality. This owner’s manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenanc...

  • Page 7

    Consult the following table for a description of the symbols that may be used on your vehicle or through- out this owner’s manual: 1 introduction 5.

  • Page 8

    Warnings and cautions this owner’s manual contains warnings against operating procedures that could result in a collision, bodily injury and/or death. It also contains cau- tions against procedures that could result in damage to your vehicle. If you do not read this entire owner’s manual, you may mi...

  • Page 9

    Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. 1 introduction 7.

  • Page 11

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . .11 ▫ ignition switch . . . . . . . . . . . . . . . . . . . . . . .11 ▫ locking doors with a key. . . . . . . . . . . . . . .12 ▫ key-in-ignition reminder . . . . . . . . . . . . . . .13 䡵 sentry key ...

  • Page 12

    ▫ wind buffeting . . . . . . . . . . . . . . . . . . . . . .23 䡵 liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . .23 ▫ liftgate emergency release . . . . . . . . . . . . . .24 䡵 occupant restraint systems . . . . . . . . .25 ▫ occupant restraint systems features . . . . . . .25 ▫ import...

  • Page 13

    A word about your keys the remote keyless entry (rke) key fob contains an integrated key. To use the mechanical key simply push the mechanical key release button. Note: the authorized dealer that sold you your ve- hicle has the key code numbers for your vehicle locks. These numbers can be used to or...

  • Page 14

    Warning! • before exiting a vehicle, always shift the auto- matic transmission into park, apply the parking break, turn the vehicle off, remove the key fob from the ignition and lock your vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children (co...

  • Page 15

    Key-in-ignition reminder opening the driver’s door when the key is in the ignition and the ignition switch position is off/lock sounds a signal to remove the key. Sentry key the sentry key immobilizer system prevents unauthor- ized vehicle operation by disabling the engine. The system does not need ...

  • Page 16

    General information the following regulatory statement applies to all radio frequency (rf) devices equipped in this vehicle: this device complies with part 15 of the fcc rules and with industry canada license-exempt rss standard(s). Operation is subject to the following two conditions: 1. This devic...

  • Page 17

    If the horn sounds a second time, check that all doors, hood and liftgate are closed correctly, then rearm the system. If the vehicle security alarm sounds the horn a second time even when all doors, hood and liftgate are cor- rectly closed, a fault has occurred in the operation of the system. Conta...

  • Page 18

    Activating the safe lock device the safe lock device is enabled on all the doors by quickly double-pushing the lock button on the key fob. The direction indicators flash three times and the led above the button flashes to indicate that the safe lock device has been activated. If one or more of the d...

  • Page 19

    To lock the doors and liftgate push and release the lock button on the key fob to lock all doors and the liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the signal. Programming additional key fobs refer to “sentry key” in this section for further infor- mation. If ...

  • Page 20

    To replace the battery, proceed as follows: 1. Push mechanical release button to open the mechani- cal key. 2. Turn the screw to unlock using a small screwdriver. 3. Take out the battery case and replace the battery making sure that polarities are correct. 4. Refit the battery case inside the key an...

  • Page 21

    Once the doors have been locked with the key fob, it will no longer be possible to unlock them by pushing central lock/unlock button. Note: with central locking active (led on), opening one of the front doors, it is possible to perform a central unlocking (led off). With central locking active (led ...

  • Page 22

    Warning! (continued) • do not leave the key fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. Caution! An unlocked vehicle is an invitation. Always re- move the key from the ignition and lock all of the door...

  • Page 23

    Warning! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child-protection locks are engaged (locked). Note: for emergency exit from the rear seats when the child-protection door lock system is engaged, unlock the doors usin...

  • Page 24

    Warning! Never leave children unattended in a vehicle, and do not let children play with power windows. Do not leave the key fob in or near the vehicle, or in a location accessible to children. Occupants, particu- larly unattended children, can become entrapped by the windows while operating the pow...

  • Page 25

    Resetting the auto-up feature should the auto-up feature stop working, the window probably needs to be reset. To reset auto-up: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window ...

  • Page 26

    Warning! • driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • if you are required to drive with the liftgate open, make sure that all windows are...

  • Page 27

    Occupant restraint systems some of the most important safety features in your vehicle are the restraint systems: occupant restraint systems features • seat belt systems • supplemental restraint systems (srs) air bags • child restraints some of the safety features described in this section may be sta...

  • Page 28

    Not use child restraints or belt-positioning booster seats should ride properly buckled up in a vehicle with a rear seat. 4. Never allow children to slide the shoulder belt behind them or under their arm. 5. You should read the instructions provided with your child restraint to make sure that you ar...

  • Page 29

    Enhanced seat belt use reminder system driver and passenger beltalert (if equipped) beltalert is a feature intended to remind the driver and outboard front seat passenger (if equipped with outboard front passenger seat beltalert) to buckle their seat belts. The belt alert feature is active whenever ...

  • Page 30

    The outboard front passenger seat beltalert is not active when the outboard front passenger seat is unoccupied. Beltalert may be triggered when an animal or other items are placed on the outboard front passenger seat or when the seat is folded flat (if equipped). It is recom- mended that pets be res...

  • Page 31

    Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure everyone in your vehicle is in a seat and using a seat belt properly. Occupants, including the driver, should always wear their seat belts whether or not an air ba...

  • Page 32

    Warning! (continued) • a seat belt that is worn under your arm is dan- gerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury. A seat belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the seat...

  • Page 33

    4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug seat belt reduces the risk of sliding...

  • Page 34

    Lap/shoulder belt untwisting procedure use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to creat...

  • Page 35

    Seat belt pretensioner the front seat belt system is equipped with pretension- ing devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by removing slack from the seat belt early in a collision. Pretensio...

  • Page 36

    If the passenger seating position is equipped with an alr and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the alr. If the alr is activated, you will hear a clicking sound as the seat belt r...

  • Page 37

    Warning! • the seat belt assembly must be replaced if the switchable automatic locking retractor (alr) feature or any other seat belt function is not working properly when checked according to the procedures in the service manual. • failure to replace the seat belt assembly could increase the risk o...

  • Page 38

    Air bag warning light the orc monitors the readiness of the elec- tronic parts of the air bag system whenever the ignition switch is in the avv/start or mar/acc/on/run position. If the igni- tion switch is in the stop/off/lock position or in the acc position, the air bag system is not on and the air...

  • Page 39

    Warning! Ignoring the air bag warning light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have ...

  • Page 40

    Warning! • being too close to the steering wheel or instru- ment panel during front air bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • never place a rear-facing ch...

  • Page 41

    Warning! (continued) may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air bags are inflating. • relying on the air bags alone could lead to more severe injuries in a co...

  • Page 42

    Knee impact bolsters the knee impact bolsters help protect the knees of the driver and front passenger, and position the front occupants for improved interaction with the front air bags. Warning! • do not drill, cut, or tamper with the knee impact bolsters in any way. • do not mount any accessories ...

  • Page 43

    When the sab deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating sab deploys through the seat seam into the space between the occupant and the door. The sab moves at a very high speed and with such a high force that it could injure occupants if they are not se...

  • Page 44

    Positioned in the area where the sabics inflate. Chil- dren are at an even greater risk of injury from a deploying air bag. Warning! • do not stack luggage or other cargo up high enough to block the deployment of the sabics. The trim covering above the side windows where the sabic and its deployment...

  • Page 45

    Warning! (continued) • side air bags need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • being too close to the side air bags during deployment could cause you to be severely in- jured or killed. • relying on the side air bags alone could lead to mo...

  • Page 46

    The sabics may help reduce the risk of partial or complete ejection of vehicle occupants through side windows in certain rollover or side impact events. The occupant restraint controller (orc) monitors the internal circuits and interconnecting wiring associated with electrical air bag system compone...

  • Page 47

    Irritation, rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instructions for cleaning. Do not drive your vehicle after the air bags have deplo...

  • Page 48

    Compartment and on the ground near the engine com- partment and fuel tank before resetting the system and starting the engine. Depending on the nature of the event the left and right turn signal lights, located in the instrument panel, may both be blinking and will continue to blink. In order to mov...

  • Page 49

    Customer action customer will see note: each step must be held for at least two seconds 12. Turn ignition mar/ acc/on/run. (entire sequence needs to be completed within one minute or sequence will need to be repeated). System is now reset and the engine may be started. Turn hazard flashers off (manu...

  • Page 50

    Event data recorder (edr) this vehicle is equipped with an event data recorder (edr). The main purpose of an edr is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems per-...

  • Page 51

    Crash statistics, children are safer when properly re- strained in the rear seats rather than in the front. Warning! In a collision, an unrestrained child can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold t...

  • Page 52

    Child size, height, weight or age recommended type of child restraint small children children who are at least two years old or who have out-grown the height or weight limit of their rear-facing child restraint forward-facing child restraint with a five-point harness, facing forward in the rear seat...

  • Page 53

    Warning! • never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear- facing child restraint. • only use a rear-facing child restraint in a vehicle with a rear se...

  • Page 54

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether ...

  • Page 55

    Recommendations for attaching child restraints restraint type combined weight of the child + child restraint use any attachment method shown with an “x” below latch – lower anchors only seat belt only latch – lower anchors + top tether anchor seat belt + top tether anchor rear-facing child restraint...

  • Page 56

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint an- chorage system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 57

    Frequently asked questions about installing child restraints with latch what is the weight limit (child’s weight + weight of the child restraint) for using the latch anchorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child...

  • Page 58

    Frequently asked questions about installing child restraints with latch can the rear-facing child restraint touch the back of the front passenger seat? Yes the child seat may touch the back of the front passenger seat if the child restraint manufacturer also allows contact. See your child restraint ...

  • Page 59

    Locating the upper tether anchorages there are tether strap anchorages behind each rear seating position located on the back of the seat, near the floor. Latch-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to...

  • Page 60

    Center seat latch warning! • do not install a child restraint in the center position using the latch system. This position is not approved for installing child seats using the latch attachments. You must use the seat belt and tether anchor to install a child seat in the center seating position. • ne...

  • Page 61

    5. Tighten all of the straps as you push the child restraint rearward and downward into the seat. Remove slack in the straps according to the child restraint manufacturer’s instructions. 6. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt pat...

  • Page 62

    Warning! • improper installation or failure to properly secure a child restraint can lead to failure of the restraint. The child could be badly injured or killed. • follow the child restraint manufacturer’s direc- tions exactly when installing an infant or child restraint. The seat belts in the rear...

  • Page 63

    Frequently asked questions about installing child restraints with seat belts what is the weight limit (child’s weight + weight of the child re- straint) for using the tether anchor with the seat belt to attach a for- ward facing child restraint? Weight limit of the child restraint always use the tet...

  • Page 64

    1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forward and rearward in the vehicle, you may wish to move it to its rear-most position to make...

  • Page 65

    Installing child restraints using the top tether anchorage: warning! Do not attach a tether strap for a rear-facing car seat to any location in front of the car seat, including the seat frame or a tether anchorage. Only attach the tether strap of a rear-facing car seat to the tether anchorage that i...

  • Page 66

    4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child res...

  • Page 67

    While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided. The engine oil installed in the engine at the factory is a high-quality energy conserving typ...

  • Page 68

    Exhaust gas warning! Exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odor- less. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (co), follow these safety tips: • do not run the engine in a closed garage or in confin...

  • Page 69

    Air bag warning light the air bag warning light will turn on for four to eight seconds as a bulb check when the ignition is first placed in the mar (acc/on/run) position. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized de...

  • Page 70

    Warning! (continued) • only install floor mats designed to fit your vehicle. Never install a floor mat that cannot be properly attached and secured to your vehicle. If a floor mat needs to be replaced, only use a fca approved floor mat for the specific make, model, and year of your vehicle. • only u...

  • Page 71

    Cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel bolts for tightness. Check the tires (including spare) for proper cold inflation pres- sure. Lights have someone observe the operation of brake lights and exterior lights while you work the controls. Check turn signal an...

  • Page 73

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . .74 ▫ inside day/night mirror . . . . . . . . . . . . . . .74 ▫ automatic dimming mirror — if equipped . .74 ▫ conversation mirror — if equipped . . . . . . . .75 ▫ power mirrors . . . ....

  • Page 74

    䡵 tilt/telescoping steering column . . .98 䡵 speed control . . . . . . . . . . . . . . . . . . . . .98 ▫ to activate . . . . . . . . . . . . . . . . . . . . . . . . . .99 ▫ to set a desired speed . . . . . . . . . . . . . . . . .99 ▫ to deactivate . . . . . . . . . . . . . . . . . . . . . . .100 ▫ t...

  • Page 75

    ▫ glove compartment . . . . . . . . . . . . . . . . . .120 ▫ front center armrest storage — if equipped .120 䡵 rear cargo storage features . . . . . . .121 ▫ securing your load . . . . . . . . . . . . . . . . . . .125 ▫ storage compartments. . . . . . . . . . . . . . . . .126 䡵 rear window features ...

  • Page 76

    Mirrors inside day/night mirror a single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield. The mirror installs on the windshield but- ton with a counterclockwise rotation and requires no tools for mounting. The mirror head can be adjus...

  • Page 77

    Caution! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Conversation mirror — if equipped there is a conversation mirror located at the top of the overhead console. Automatic ...

  • Page 78

    To gain access to the conversation mirror, pull down- ward on the mirror to the open position. Power mirrors the power mirror controls are located on the driver’s door trim panel. To adjust a mirror, turn the control knob toward the left or right mirror positions indicated. Tilt the control wand in ...

  • Page 79

    Sun visors the driver and passenger sun visors are located on the headliner, near the front windshield. The sun visor can be rotated downward or up against the door glass. Both sun visors are equipped with illuminated courtesy mirrors. Sun visor “slide-on-rod” feature the sun visor “slide-on-rod” fe...

  • Page 80

    Seats front seats forward/rearward adjustment the adjusting bar is located at the front of the seats, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward. Release the bar once the desired position is reached. Then, using body pressure, move forward and...

  • Page 81

    Recliner adjustment the recline lever is located on the outboard side of the seat. To recline the seat, lean forward slightly, lift the lever, lean back to the desired position and release the lever. To return the seatback to its normal upright position, lean forward and lift the lever. Release the ...

  • Page 82

    Warning! (continued) seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. Power lumbar — if equipped push the power lumbar switch to adjust the lumbar support. Release the switch when you reach the desired position. Heated seats — if equipped on some ...

  • Page 83

    Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabe- tes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exer- cise care when using the seat heater. It may cause burns even at low temperatures, especiall...

  • Page 84

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 85

    Fold and tumble rear seat note: • prior to folding the rear seat, it may be necessary to reposition the front seats. • be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily. 1. Lift the seatback release lever located on the upper out...

  • Page 86

    3. Locate the seatback recline lever on the outboard side of the seat and lift upward on the lever. 4. Slowly flip the entire seat forward. 5. Slowly flip the entire seat rearward and firmly lock the seat into position. 6. Raise the rear seatback and firmly lock the seatback into position. Seatback ...

  • Page 87

    Rear armrest — if equipped to use the armrest, lower it downward. Head restraints head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear- impact. Head restraints should be adjusted so that the top of the head restraint is located above the top o...

  • Page 88

    Warning! • all occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper posi- tions in order to minimize the risk of neck injury in the event of a crash. • head restraints should never be adjusted while the vehicle ...

  • Page 89

    Note: do not reposition the head restraint 180 degrees to the incorrect position in an attempt to gain additional clearance to the back of the head. Warning! • a loose head restraint thrown forward in a colli- sion or hard stop could cause serious injury or death to occupants of the vehicle. Always ...

  • Page 90

    Warning! A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment. For proper routing of a child seat tether, refer to “occupant restr...

  • Page 91

    2. Move to the outside of the vehicle and push the red safety catch lever to the left and raise the hood. The safety catch lever is located under the center front edge of the hood. Warning! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open...

  • Page 92

    Note: the external lights can only be turned on with the ignition in the on/run position. Headlights rotate the end of the multifunction lever upward to the first detent for headlight operation. Note: when the headlights are turned on, the daytime running lights will be deactivated. Daytime running ...

  • Page 93

    High beams with the low beams activated, pull the multi- function lever towards the steering wheel to turn on the high beams. Pull the multifunction lever toward the steering wheel again to turn off the high beams. Flash-to-pass you can signal another vehicle with your headlights by partially pullin...

  • Page 94

    Time the lever is pulled, the activation of the lights will be extended by 30 seconds. The activation of the lights can be extended to a maximum of 210 seconds. Deactivation pull the multifunction lever toward the steering wheel and hold it for more than two seconds. Front fog lights — if equipped t...

  • Page 95

    Push the switch to the off/left position from its center position and the lights are always off. Leave the switch in the center position, and the lights are turned on and off when the doors are opened or closed. Off/left position center position 3 understanding the features of your vehicle 93.

  • Page 96

    The switches on the left and right sides of the overhead console controls the map or reading function of the lights. Push the switch to the right to turn on the right light and push the switch to the left to turn on the left light. Caution! Before getting out of the vehicle be sure that the switch i...

  • Page 97

    Note: the windshield wipers/washers will only op- erate with the ignition in the on/run position. Front windshield wiper operation there are five different modes of operation for the front windshield wipers. The windshield wiper lever can be raised or lowered to access these modes. Windshield wiper ...

  • Page 98

    Front windshield washer operation pull the windshield wiper/washer lever toward the steer- ing wheel to activate the washers. The wipers will activate automatically for three cycles after the lever is released. Caution! • turn the windshield wipers off when driving through an automatic car wash. Dam...

  • Page 99

    With the front windshield wipers on and reverse gear engaged, rear window wiping will be continuous in the same way. Pushing the windshield wiper lever forward activates the rear window washer. Keep the windshield wiper lever pushed for more than half a second to activate the rear window wiper as we...

  • Page 100

    Tilt/telescoping steering column this feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping con- trol handle is located on the steering column, below the turn signal lever. To unlock the steering column,...

  • Page 101

    Note: in order to ensure proper operation, the speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the speed control system can be reactivated by pushing the speed control on/off button and resetting the desired vehic...

  • Page 102

    To deactivate a soft tap on the brake pedal, pushing the canc button, or normal brake pressure while slowing the vehicle will deactivate speed control without erasing the set speed memory. Pushing the on/off button or turning the ignition switch off erases the set speed in memory. To resume speed to...

  • Page 103

    To decrease speed when the speed control is set, you can decrease speed by pushing the set (-) button. The driver’s preferred units can be selected through the uconnect settings if equipped. Refer to ⬙uconnect set- tings” in understanding your instrument panel” for more information. The speed decrem...

  • Page 104

    Rear park assist — if equipped the rear park assist system provides an audible indi- cation of the distance between the rear fascia/bumper and a detected obstacle when backing up, e.G. During a parking maneuver. Refer to the “park assist system usage precautions” for the limitations of this system a...

  • Page 105

    Audible and visual signals supplied by the rear park assist system signal meaning indication obstacle distance an obstacle is present within the sensors’ field of view audible signal (dashboard loud- speaker) • sound pulses emitted at a rate that increases as the distance de- creases. • emits contin...

  • Page 106

    Failure indications a malfunction of the rear park assist sensors or system is indicated, during reverse gear engagement, by the instrument panel warning icon and message appearing on the instrument cluster display. The warning icon is illuminated and a mes- sage appearing on the instrument cluster ...

  • Page 107

    • objects such as bicycle carriers, etc., must not be placed within 12 inches (30 cm) from the rear fascia/ bumper while driving the vehicle. Failure to do so can result in the system misinterpreting a close object as a sensor problem, causing a failure indication to be displayed in the instrument c...

  • Page 108

    If it’s necessary to keep the ball mount and hitch ball assembly mounted for a long period, it is possible to filter out the ball mount and hitch ball assembly pres- ence in sensor field of view. The filtering operation must be performed only by an authorized dealer. Parkview rear back up camera — i...

  • Page 109

    The following table shows the approximate distances for each zone: zone distance to the rear of the vehicle red 0 - 1 ft (0 - 30 cm) yellow 1 ft - 3 ft (30 cm - 1 m) green 3 ft or greater (1 m or greater) warning! Drivers must be careful when backing up even when using the parkview rear back up came...

  • Page 110

    Garage door opener — if equipped homelink replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting or home secu- rity systems. The homelink unit operates off your vehicles battery. The homelink buttons that are located...

  • Page 111

    Programming a rolling code for programming garage door openers that were manu- factured after 1995: these garage door openers can be identified by the “learn” or “train” button located where the hang- ing antenna is attached to the garage door opener. It is not the button that is normally used to op...

  • Page 112

    5. At the garage door opener motor (in the garage), locate the “learn” or “training” button. This can usually be found where the hanging antenna wire is attached to the garage door opener/device motor. Firmly push and release the “learn” or “training” button. On some garage door openers/devices ther...

  • Page 113

    Note: for vehicles equipped with keyless enter-n- go, place the ignition in the run position with the engine on. Make sure while programming homelink with the engine on that your vehicle is outside of your garage, or that the garage door remains open at all times. 2. Place the hand-held transmitter ...

  • Page 114

    3. Without releasing the button, proceed with “pro- gramming a non-rolling code” step two and follow all remaining steps. Canadian/gate operator programming for programming transmitters in canada/united states that require the transmitter signals to “time-out” after several seconds of transmission: ...

  • Page 115

    Note: • if the indicator light stays on constantly, program- ming is complete and the garage door/device should activate when the homelink button is pushed. • to program the two remaining homelink buttons, repeat each step for each remaining button. Do not erase the channels. If you unplugged the ga...

  • Page 116

    Note: all channels will be erased. Individual channels cannot be erased. The homelink universal transceiver is disabled when the vehicle security alarm is active. Troubleshooting tips if you are having trouble programming homelink, here are some of the most common solutions: • replace the battery in...

  • Page 117

    2. This device must accept any interference received, including interference that may cause undesired operation. Note: • the transmitter has been tested and it complies with fcc and ic rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’...

  • Page 118

    Warning! (continued) switch. Such entrapment may result in serious injury or death. • in a collision, there is greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passen- gers are pro...

  • Page 119

    With the blind fully open pull the power sun blind switch and the blind will move towards the front part of the vehicle, until it is fully closed. Note: during the automatic opening and closing stages, if the power sun blind switch is pulled again it will stop the blind movement. Power outlets passe...

  • Page 120

    Cigar lighter — if equipped this is located on the floor console between the front seats, next to the parking brake lever. To activate the cigar lighter, push and release the knob. After a few seconds the knob automatically returns to its initial position, and the cigar lighter is ready for use. War...

  • Page 121

    Cupholders for the driver and front passenger, cupholders are located on the floor console between the front seats. For the rear seat passengers their is one cupholder located in the center armrest (if equipped). Front cupholders rear cupholder 3 understanding the features of your vehicle 119.

  • Page 122

    Storage glove compartment your vehicle is equipped with a upper and lower glove compartment which is located on the right side of the instrument panel. Push the latch button upward on the upper glove compartment door to open it. Pull outward on the lower glove compartment latch to open the lower glo...

  • Page 123

    Lift upward on the armrest to gain access to the storage area. The front center armrest can also be lifted up and adjusted in three positions, this is done by pulling up on the armrest, push the latch down to adjust the armrest down. Rear cargo storage features this vehicle features a load platform ...

  • Page 124

    • position 3 (platform completely raised) in conjunc- tion with the lowering of the rear seat and front passenger side seat backrests, permits long objects to be loaded. It is advisable to use this position only for the actual period in which the objects are trans- ported, then return the platform t...

  • Page 125

    Access to double load compartment to access the double load compartment, proceed as follows: 1. Grip handle and raise platform, holding it with one hand. 2. Place the desired objects in compartment. Load platform 1 — handle 2 — platform load compartment 3 understanding the features of your vehicle 1...

  • Page 126

    3. Then reposition the platform correctly in the hous- ings on the side panels and rear crossmember. Note: movements of the load platform must take place in a central position relative to the luggage compartment. Moving the load platform to move the load platform from lower to upper posi- tion, proc...

  • Page 127

    2. Position the platform correctly on housing on the side panels. Securing your load there are two tie downs inside the luggage compart- ment for attaching cables which can secure the load carried. A further two tie downs located on the rear crossmem- ber. Raised position 1 — front housing locations...

  • Page 128

    Two hooks are also available on the side panels to fix loads which are not excessively heavy (e.G. Bags). To use the hooks, push the release button. Caution! The maximum load admitted per each bag hook is 22 lbs (10 kg). Storage compartments there are two storage compartments located on the rear sid...

  • Page 129

    Defroster automatically turns off after approximately 20 minutes. To manually shut the defroster off, push the button a second time. Note: to prevent excessive battery drain, use the rear window defroster only when the engine is operating. Caution! Failure to follow these cautions can cause damage t...

  • Page 130

    Distribute cargo weight evenly on the roof rack cross- bars. The roof rack does not increase the total load carrying capacity of the vehicle. Be sure the total load of cargo inside the vehicle plus that on the external rack does not exceed the maximum vehicle load capacity. Warning! Cargo must be se...

  • Page 131

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . .131 䡵 instrument cluster . . . . . . . . . . . . . . . .132 ▫ instrument cluster descriptions . . . . . . . . . .133 䡵 warning and indicator lights . . . . . .134 ▫ red telltale indicator lights . . . . . . . ....

  • Page 132

    ▫ radio operation . . . . . . . . . . . . . . . . . . . . .191 ▫ player operation . . . . . . . . . . . . . . . . . . . . .192 䡵 cd/dvd disc maintenance . . . . . . . . . .192 䡵 radio operation and mobile phones .192 䡵 climate controls . . . . . . . . . . . . . . . . . .193 ▫ manual climate control ...

  • Page 133

    Instrument panel features 1 — uconnect phone for bluetooth hands free calling 7 — fixed upper air vent 13 — climate controls 2 — multifunction lever – light control 8 — passenger front air bag 14 — usb port/sd card/aux socket 3 — instrument cluster and warning lights 9 — upper glove compartment 15 —...

  • Page 134

    Instrument cluster instrument cluster 132 understanding your instrument panel.

  • Page 135

    Instrument cluster descriptions 1. Speedometer • indicates vehicle speed. 2. Fuel gauge • the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run posi- tion. • the fuel pump symbol points to the side of the vehicle where the fuel door is located. 3. Temperature...

  • Page 136

    4. Tachometer • indicates the engine speed in revolutions per min- ute (rpm x 1000). 5. Instrument cluster display • the instrument cluster display shows messages when the appropriate conditions exist. Refer to “instrument cluster display” in “understanding your instrument panel” for further informa...

  • Page 137

    Red telltale indicator lights brake warning light red telltale light what it means english metric brake warning light this light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied,...

  • Page 138

    If brake failure is indicated, immediate repair is neces- sary. Warning! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle checked immediately. Vehicles equipped ...

  • Page 139

    Engine temperature warning light red telltale light what it means engine temperature warning light this light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches h, this indicator will illuminate and a single chime will sound after reaching a set thr...

  • Page 140

    Air bag warning light red telltale light what it means air bag warning light this light will turn on for four to eight seconds as a bulb check when the ignition is placed in the mar (acc/on/run) position. If the light is either not on during startup, stays on, or turns on while driving, have the sys...

  • Page 141

    Electronic throttle control (etc) warning light red telltale light what it means electronic throttle control (etc) warning light this light informs you of a problem with the electronic throttle control (etc) system. If a problem is detected while the engine is running, the light will either stay on ...

  • Page 142

    Yellow telltale indicator lights anti-lock brake (abs) indicator light yellow telltale light what it means anti-lock brake (abs) indicator light after the ignition is turned on, the anti-lock brake system (abs) light illuminates to indi- cate function check at vehicle startup. If the light remains o...

  • Page 143

    Electronic stability control (esc) activation/malfunction indicator light yellow telltale light what it means electronic stability control (esc) indicator light the esc activation/malfunction indicator light in the instrument cluster will come on for four seconds when the ignition switch is turned t...

  • Page 144

    Rear defrost light yellow telltale light what it means rear defrost light this indicator will illuminate when the rear window defroster is on. The rear window de- froster automatically turns off after 20 minutes. Caution! Failure to follow these cautions can cause damage to the heating elements: • u...

  • Page 145

    Low fuel indicator light yellow telltale light what it means low fuel indicator light when the fuel level reaches approximately 3.0 gal (11.0 l) this light will turn on, and remain on until fuel is added. Passenger air bag indicator light yellow telltale light what it means passenger air bag indicat...

  • Page 146

    Engine check/malfunction indicator light (mil) yellow telltale light what it means engine check/malfunction indicator light (mil) the engine check/malfunction indicator light (mil) is a part of an onboard diagnostic system called obd ii that monitors engine and automatic transmission control systems...

  • Page 147

    Caution! Prolonged driving with the malfunction indicator light (mil) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the mil is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required. Tire ...

  • Page 148

    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (if your vehicle has tires of a different size than the size indicated on the vehi...

  • Page 149

    Caution! The tpms has been optimized for the original equipment tires and wheels. Tpms pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system op- eration or sensor damage may result when using replacement equipment that is not of the same size, typ...

  • Page 150

    Green telltale indicator lights turn signal indicator lights green telltale light what it means turn signal indicator lights the instrument cluster directional arrow will flash independently for the left or right turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) a...

  • Page 151

    White telltale indicator lights cruise control cancelled light white telltale light what it means cruise control cancelled light this light will turn on when the cruise control has been cancelled by the driver. Refer to “speed control” in “understanding the features of your vehicle” for further info...

  • Page 152

    Instrument cluster display your vehicle may be equipped with an instrument cluster display, which offers useful information to the driver. With the ignition in the stop/off position, opening/closing of a door will activate the display for viewing, and display the total miles (kilometers) in the odom...

  • Page 153

    • dimmer • headlight adj • speed buzzer • headlamp sensor • cornering lights • rain sensor • trip b data • set time • set date • first page • see radio • autoclose • units • language • buzzer volume • seat belt buzzer • service • passenger airbag • day lights • hill start • tire reset • city brake c...

  • Page 154

    3. Briefly push and release the menu button to select the displayed submenu option and to open the relevant setup menu. 4. Push and release the up or down button (by single pushes) to select the new setting for this submenu option. 5. Briefly push and release the menu button to store the new setting...

  • Page 155

    “trip a” can be used to display the figures relating to: • outside temperature • range • trip distance a • average economy a • instant economy • average speed a • travel time a (driving time). “trip b” can be used to display the figures relating to: • trip distance b • average economy b • average sp...

  • Page 156

    Trip button features new trip the trip can be reset the following ways: • push and hold the trip button to reset the system manually. • when the “trip distance” reaches 99999.9 miles or kilometers or when the “travel time” reaches 999.59 (999 hours and 59 minutes), the system is reset automatically....

  • Page 157

    Distance traveled this value shows the distance covered since the last reset. Average fuel economy this value shows the approximate average fuel con- sumption since the last reset. Instantaneous fuel economy this indicates the fuel consumption. The value is con- stantly updated. The message “----” w...

  • Page 158

    To set the speed limit, proceed as follows: 1. Briefly push and release the menu button. The display will show the message (speed beep). 2. Push and release the up or down button to select speed limit activation (on) or deactivation (off). 3. When the function is activated (on), briefly push and rel...

  • Page 159

    Proceed as follows to set: 1. Push menu button briefly. The level set previously flashes on the display. 2. Push the up or down button to make the adjustment. 3. Push the menu button briefly to return to the menu screen or hold the button down to return to the standard screen without storing. Corner...

  • Page 160

    3. Briefly push and release the menu button to go back to the menu screen, or push and hold the menu button (approximately one second) to go back to the main screen without storing the settings. Trip b data submenu settings: • on • off • return to menu set time (clock) this function may be used to s...

  • Page 161

    When you have selected the required settings, briefly push and release the menu button to go back to the “time” or “mode” sub-menu screen, or push and hold the menu button (approximately one second) to go back to the main screen without storing the settings. Set date this function may be used to set...

  • Page 162

    • briefly push the menu button to go back to the menu screen or hold the button down to go back to the standard screen without saving. When the key is turned to mar/acc/on/run and the initial check stage is over, the display will show the information selected via the ⬙first page⬙ menu function. Audi...

  • Page 163

    Menu button (approximately one second) to go back to the main screen without storing the settings. Units (set units) this function may be used to set the measurement unit in three submenus: “distance,” “temperature,” and “fuel economy and tire pressure.” to set the required unit, proceed as follows:...

  • Page 164

    When you have made the required settings, briefly push and release the menu button to go back to the sub-menu screen, or push and hold the menu button (approximately one second) to go back to the main screen without storing the settings. Language (selecting the language) the messages can be displaye...

  • Page 165

    To reactivate this function, proceed as follows: 1. Push and release the up or down button briefly; ⬙off⬙ will flash on the display. Push and release the or up or down button and ⬙on⬙ will appear. 2. Push and release the set esc button briefly to return to the submenu screen or hold the button down ...

  • Page 166

    Proceed as follows: 1. Push the menu button and, after the message ⬙bag pass: off ⬙ (to deactivate) or ⬙bag pass: on⬙ (to activate) is displayed by pushing up and down buttons, push the menu button again. 2. A confirmation request message will appear on the display. 3. Push the up or down buttons to...

  • Page 167

    Menu button (approximately one second) to go back to the main screen without storing the settings. City brake control (collision mitigation) this function allows the driver to activate ( ⬙on⬙) or deactivate ( ⬙off⬙) the city brake control - ⬙collision mitigation ⬙ system. To adjust proceed as follow...

  • Page 168

    3. Push and release the down button to return to the last menu option (daylights). Cybersecurity your vehicle may be a connected vehicle and may be equipped with both wired and wireless networks. These networks allow your vehicle to send and receive information. This information allows systems and f...

  • Page 169

    Note: • fca or your dealer may contact you directly regard- ing software updates. • to help further improve vehicle security and mini- mize the potential risk of a security breach, vehicle owners should: • routinely check www.Driveuconnect.Com/ software-update to learn about available uconnect softw...

  • Page 170

    Customer programmable features — uconnect 5.0 settings warning! Always drive safely with your hands on the wheel. You have full responsibility and assume all risks related to the use of the uconnect features and applications in this vehicle. Only use uconnect when it is safe to do so. Failure to do ...

  • Page 171

    Display after pressing the “display” button on the touchscreen the following settings will be available: setting name selectable options display mode auto manual note: when the “display mode” feature is set to “auto” the radio touchscreen’s brightness will be adjusted with all other instrument panel...

  • Page 172

    Voice after pressing the “voice” button on the touchscreen the following settings will be available: setting name selectable options voice response length brief long show command list always with help never clock & date after pressing the “clock & date” button on the touch- screen, the following set...

  • Page 173

    Setting name selectable options set date up arrow down arrow note: when “set date” is selected, you can adjust the month, day, and year using the up and down arrow buttons. Safety & driving assistance after pressing the “safety & driving assistance” button on the touchscreen, the following setting w...

  • Page 174

    Doors & locks after pressing the “doors & locks” button on the touchscreen, the following setting will be available: setting name selectable options auto door locks on off note: when the “auto door locks” feature is selected, all doors will lock automatically when the vehicle reaches a speed of 12 m...

  • Page 175

    Setting name selectable options balance/fade when in the “balance/ fade” display, you may adjust the balance settings. Auto-on radio on off recall last note: when the “auto-on radio” feature is selected, the radio automatically turns on when vehicle is in run or will recall whether it was on or off ...

  • Page 176

    Siriusxm setup — if equipped after pressing the “siriusxm setup” button on the touchscreen, the following settings will be available: setting name selectable options channel skip channel skip note: siriusxm can be programmed to designate a group of channels that are the most desirable to listen to o...

  • Page 177

    Restore settings after pressing the “restore settings” button on the touchscreen the following settings will be available: setting name selectable options restore settings yes no note: when this feature is selected, it will reset display, clock, audio, and radio settings to their default. Customer p...

  • Page 178

    Display after pressing the “display” button on the touchscreen the following settings will be available: setting name selectable options display mode auto manual note: when day or night is selected for the display mode, the usage of the parade mode feature will cause the radio to activate the displa...

  • Page 179

    Setting name selectable options touchscreen beep on off navigation turn-by-turn in cluster on off note: when this feature is selected, the turn-by-turn directions will appear in the display as the vehicle ap- proaches a designated turn within a programmed route. To make your selection, press the “na...

  • Page 180

    Voice after pressing the “voice” button on the touchscreen, the following settings will be available: setting name selectable options voice response length brief long show command list never w/help always clock after pressing the “clock” button on the touchscreen the following settings will be avail...

  • Page 181

    Setting name selectable options set time minutes + – note: this feature will allow you to adjust the minutes. The “sync time with nav” button on the touchscreen must be unchecked. Time format 12hrs 24hrs show time in status bar — if equipped on off note: this feature will allow you to turn on or shu...

  • Page 182

    Setting name selectable options blind spot alert — if equipped off lights lights & chime note: when this feature is selected, the blind spot alert feature can be set to off, lights or lights and chime. The blind spot alert feature can be activated in lights mode. When this mode is selected, the blin...

  • Page 183

    Setting name selectable options headlight off delay 0 sec 30 sec 60 sec 90 sec greeting lights on off daytime running lights yes no steering directed lights yes no note: when this feature is selected, the headlights will turn relative to a change in the direction of the steer- ing wheel. Cornering l...

  • Page 184

    Doors & locks after pressing the “doors & locks” button on the touchscreen the following settings will be available: setting name selectable options auto door locks yes no note: when this feature is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). Aut...

  • Page 185

    Setting name selectable options • if the vehicle is programmed 1st press of key fob unlocks, all doors will unlock no matter which passive entry equipped door handle is grasped. If 1st press of key fob unlocks is programmed, only the driver’s door will unlock when the driver’s door is grasped. With ...

  • Page 186

    Auto comfort systems — if equipped after pressing the “auto-on comfort & remote start” button on the touchscreen the following settings will be available: setting name selectable options horn with remote start yes no auto-on driver heated/ventilated seat & steering wheel with ve- hicle start — if eq...

  • Page 187

    Engine off options after pressing the “engine off options” button on the touchscreen the following settings will be available: setting name selectable options easy exit seats — if equipped yes no note: when this feature is selected, the driver’s seat will automatically move rearward once the engine ...

  • Page 188

    Audio after pressing the “audio” button on the touchscreen the following settings will be available: setting name selectable options balance/fade speaker icon arrow buttons “c” icon note: when in this display you may adjust the balance and fade settings. Equalizer + – note: when in this display you ...

  • Page 189

    Setting name selectable options aux volume match — if equipped on off note: this feature provides the ability to tune the audio level for portable devices connected through the aux input. Loudness — if equipped yes no note: loudness improves sound quality at lower volumes. Auto-on radio on off recal...

  • Page 190

    After pressing the “phone/bluetooth” button on the touchscreen the following settings will be available: setting name selectable options paired phones currently paired phones paired audio devices currently paired audio devices siriusxm setup — if equipped after pressing the “siriusxm setup” button o...

  • Page 191

    Setting name selectable options subscription information subscription info note: new vehicle purchasers or lessees will receive a free limited time subscription to siriusxm satellite radio with your radio. Following the expiration of the free services, it will be necessary to access the information ...

  • Page 192

    Clear personal data after pressing the “clear personal data settings” but- ton on the touchscreen, the following settings will be available: setting name selectable options clear personal data yes no note: when this feature is selected, it will remove personal data including bluetooth devices and pr...

  • Page 193

    Refer to the uconnect 5.0 or 6.5 owner’s manual supplement for ipod and external usb support capa- bility. Steering wheel audio controls the remote sound system controls are located at the rear of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-t...

  • Page 194

    Player operation pushing the top of the switch once will go to the next track on the player. Pushing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the previous track if it is within one second after the current track begins to play. If you push t...

  • Page 195

    Climate controls manual climate control overview manual climate control descriptions icon description a/c button push the a/c button to engage the air conditioning (a/c). A led will illuminate when the a/c system is engaged. Manual climate controls 4 understanding your instrument panel 193.

  • Page 196

    Icon description recirculation button push and release this button to change the system between recirculation mode and outside air mode. Recirculation can be used when outside conditions such as smoke, odors, dust, or high humidity are present. Note: • continuous use of the recirculation mode may ma...

  • Page 197

    Icon description blower control there are seven blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position. Note: depending on the configuration, your vehicle may b...

  • Page 198

    Icon description mix mode mix mode air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield. This set- ting is good for maintaining comfort while reducing moisture on the windshield. Fr...

  • Page 199

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping paral- lel to the heating element...

  • Page 200

    Automatic climate control descriptions icon description a/c button push and release to change the current setting, the indicator illuminates when a/c is on. Performing this function again will cause the a/c operation to switch into manual mode and the a/c indicator will turn off. Recirculation butto...

  • Page 201

    Icon description front defrost button push and release to change the current airflow setting to defrost mode. The indicator illu- minates when this feature is on. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level will increase. Use de...

  • Page 202

    Icon description panel mode panel mode air comes from the outlets in the instrument panel. Each of these outlets can be individu- ally adjusted to direct the flow of air. The air vanes of the center outlets and outboard out- lets can be moved up and down or side to side to regulate airflow direction...

  • Page 203

    Icon description climate control power button push and release this button to turn the climate control on/off. Driver temperature knob provides the driver with independent temperature control. Rotate the knob clockwise for warmer temperature settings. Rotate the knob counterclockwise for cooler temp...

  • Page 204

    Note: • if fog or mist appears on the windshield or side glass, select defrost mode and increase blower speed if needed. • if your air conditioning performance seems lower than expected, check the front of the a/c condenser (located in front of the radiator), for an accumulation of dirt or insects. ...

  • Page 205

    3. When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Note: • it is not necessary to move the temperature settings for cold or hot vehicles. The system auto...

  • Page 206

    Coolant selection. Use of the air recirculation mode during winter months is not recommended because it may cause window fogging. Vacation/storage before you store your vehicle, or keep it out of service (i.E., vacation) for two weeks or more, run the air conditioning system at idle for about five m...

  • Page 207

    Operating tips chart 4 understanding your instrument panel 205.

  • Page 208

    Voice recognition quick tips introducing uconnect start using uconnect voice recognition with these helpful quick tips. It provides the key voice commands and tips you need to know to control your uconnect 5.0 or 6.5 nav system. Key features: • 5.0-inch color touchscreen display with am/fm/ usb/blue...

  • Page 209

    Get started all you need to control your uconnect system with your voice are the buttons on your steering wheel. 1. Visit uconnectphone.Com to check mobile device and feature compatibility and to find phone pair- ing instructions. 2. Reduce background noise. Wind and passenger con- versations are ex...

  • Page 210

    Basic voice commands the basic voice commands below can be given at any point while using your uconnect system. Push the vr button . After the beep, say ѧ • cancel to stop a current voice session. • help to hear a list of suggested voice commands. • repeat to listen to the system prompts again. Noti...

  • Page 211

    Tip: at any time, if you are not sure of what to say or want to learn a voice command, push the vr button and say “help.” the system will provide you with a list of commands. Media uconnect offers connections via usb port, bluetooth and auxiliary ports (if equipped). Voice operation is only availabl...

  • Page 212

    • change source to usb. • play artist beethoven; play album greatest hits; play song moonlight sonata; play genre classical. Tip: press the browse button on the touchscreen to see all of the music on your ipod or usb device. Your voice command must match exactly how the artist, album, song and genre...

  • Page 213

    • call back (call previous incoming phone number). Tip: when providing a voice command, push the phone button and say “call,” then pronounce the name exactly as it appears in your phone book. When a contact has multiple phone numbers, you can say “call john smith work.” navigation (6.5 nav) the ucon...

  • Page 214

    Tip: to start a poi search, push the vr button . After the beep, say: “ find nearest coffee shop.” voice text reply uconnect will announce incoming text messages. Push the phone button and say “listen.” (must have compatible mobile phone paired to uconnect sys- tem.) 1. Once an incoming text message...

  • Page 215

    General information this device complies with fcc rules part 15 and industry canada rss-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause...

  • Page 217

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . .218 ▫ automatic transmission . . . . . . . . . . . . . . .218 ▫ normal starting. . . . . . . . . . . . . . . . . . . . . .218 ▫ cold weather operation . . . . . . . . . . . . . . .218 ▫ extended park starting. . . . ....

  • Page 218

    ▫ dynamic steering torque (dst) . . . . . . . . . .235 ▫ electronic stability control (esc) . . . . . . . . .235 ▫ esc activation/malfunction indicator light and esc off indicator light . . . . . . . . . . . . . . .236 ▫ electronic roll mitigation (erm) . . . . . . . . .238 䡵 tire safety information...

  • Page 219

    ▫ gasoline/oxygenate blends . . . . . . . . . . . . .267 ▫ cng and lp fuel system modifications . . . .267 ▫ mmt in gasoline . . . . . . . . . . . . . . . . . . . .267 ▫ materials added to fuel . . . . . . . . . . . . . . .268 ▫ fuel system cautions. . . . . . . . . . . . . . . . . .268 ▫ carbon mon...

  • Page 220

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children to be in a vehicle unattended is dangerous for a numb...

  • Page 221

    (–15°c). This acts as a reminder to avoid possible crank delays at the next cold start. Caution! Use of the recommended sae 5w-40 synthetic oil and adhering to the prescribed oil change intervals is important to prevent engine damage and ensure satisfactory starting in cold conditions. Extended park...

  • Page 222

    After starting the idle speed is controlled automatically, and it will decrease as the engine warms up. Turbo charger “cool down” this vehicle is equipped with an after-run pump to cool the turbocharger after the engine is shut off. Depending on the type of driving and the amount of cargo, the pump ...

  • Page 223

    Warning! (continued) ignition key. Once the key is removed, the trans- mission is locked in park, securing the vehicle against unwanted movement. • when leaving the vehicle, always remove the ignition key from the vehicle and lock the vehicle. • never leave children alone in a vehicle, or with acces...

  • Page 224

    Self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Only shift from drive to park or reverse when the accelerator pedal is released and the vehicle is stopped...

  • Page 225

    Park (p) this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use park while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmi...

  • Page 226

    Warning! (continued) the parking brake, shift the transmission into park, turn the engine off, and remove the ignition key. Once the key is removed, the trans- mission is locked in park, securing the vehicle against unwanted movement. • when leaving the vehicle, always remove the ignition key from t...

  • Page 227

    Reverse (r) this range is for moving the vehicle backward. Shift into reverse only after the vehicle has come to a complete stop. Neutral (n) use this range when the vehicle is standing for pro- longed periods with the engine running. The engine may be started in this range. Apply the parking brake ...

  • Page 228

    If the transmission temperature exceeds normal operat- ing limits, the transmission controller will expand the range of torque converter clutch engagement. This is done to prevent transmission damage due to overheat- ing. During cold temperatures, transmission operation may be modified depending on ...

  • Page 229

    Autostick autostick is a driver-interactive transmission feature providing manual shift control, giving you more control of the vehicle. Autostick allows you to maximize engine braking, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can also provi...

  • Page 230

    To disengage autostick mode, return the gear selector to the drive position. You can shift in or out of the autostick position at any time without taking your foot off the accelerator pedal. Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose th...

  • Page 231

    5. Maintain sufficient distance between your vehicle and the vehicle in front of you to avoid a collision in a sudden stop. Driving through water driving through water more than a few inches/ centimeters deep will require extra caution to ensure safety and prevent damage to your vehicle. Flowing/ris...

  • Page 232

    Caution! • always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • determine the condition of the road or the path that is under water and if there are any obstacles in the wa...

  • Page 233

    When the parking brake is applied with the ignition switch in the mar (acc/on/run) position, the brake warning light in the instrument cluster will illuminate. When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill gra...

  • Page 234

    Caution! If the brake warning light remains on with the parking brake released, a brake system malfunction is indicated. Have the brake system serviced by an authorized dealer immediately. Brake system your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems...

  • Page 235

    System reverts to standard non-anti-lock brakes. Turn- ing the ignition off and on again may reset the abs if the fault detected was only momentary. Warning! • pumping the anti-lock brakes will diminish their effectiveness and may lead to a collision. Pumping makes the stopping distance longer. Just...

  • Page 236

    Warning! • the brake assist system (bas) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • the bas cannot prevent collisions, including those resulting from excessive speed in turns, driving on very slipp...

  • Page 237

    • gear selection matches vehicle uphill direction (i.E., vehicle in neutral (manual transmission), vehicle facing uphill is in forward gear; vehicle backing uphill is in reverse gear). Warning! There may be situations on minor hills with a loaded vehicle, or while pulling a trailer, when the system ...

  • Page 238

    • oversteer - when the vehicle is turning more than appropriate for the steering wheel position. • understeer - when the vehicle is turning less than appropriate for the steering wheel position. Warning! • the electronic stability control (esc) cannot prevent the natural laws of physics from acting ...

  • Page 239

    Vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your autho- rized dealer as soon as possible to have the problem diagnosed and corrected. The esc activation/malfunction indicator light (lo- cated in the instrument cluster) starts to flash as soon as th...

  • Page 240

    Note: to improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow, sand, or gravel, it may be desirable to switch to the “partial off” mode by momentarily pushing the “esc off” button. Once the situation requiring “partial off” mode is overcome, turn esc back o...

  • Page 241

    Erm can only reduce the chance of wheel lift occurring during severe or evasive driving maneuvers. It cannot prevent wheel lift due to other factors, such as road conditions, leaving the roadway, or striking objects or other vehicles. Warning! Many factors, such as vehicle loading, road condi- tions...

  • Page 242

    Tire safety information tire markings note: • p (passenger) — metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european — metric tire sizing is based on european design stand...

  • Page 243

    Tire sizing chart example: example size designation: p215/65r15xl 95h, 215/65r15 96h, lt235/85r16c, t145/80d18 103m, 31x10.5 r15 lt p = passenger car tire size based on u.S. Design standards, or ⴖ....Blank....ⴖ = passenger car tire based on european design standards, or lt = light truck tire based o...

  • Page 244

    Example: h = speed symbol – a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – the maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.E., tire press...

  • Page 245

    Example: dot ma l9 abcd 0301 dot = department of transportation – this symbol certifies that the tire is in compliance with the u.S. Department of transportation tire safety standards and is approved for highway use ma = code representing the tire manufacturing location (two digits) l9 = code repres...

  • Page 246

    Term definition cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the ve- hicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. Inflation pressure is measured in units of psi (...

  • Page 247

    Warning! • overloading of your tires is dangerous. Overload- ing can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. • improperly inflated tires are dangerous and can cause collisions....

  • Page 248

    Tire and loading information placard this placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. ...

  • Page 249

    To determine the maximum loading conditions of your vehicle, locate the statement “the combined weight of occupants and cargo should never exceed xxx kg or xxx lbs” on the tire and loading information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) ...

  • Page 250

    Of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle. • for the following example, the combined weight of occupants and cargo should never exceed 865 lbs (392 kg). 248 starting and operating.

  • Page 251

    Warning! Overloading of your tires is dangerous. Overload- ing can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation press...

  • Page 252

    Note: • unequal tire pressures from side to side may cause erratic and unpredictable steering response. • unequal tire pressure from side to side may cause the vehicle to drift left or right. Fuel economy underinflated tires will increase tire rolling resistance resulting in higher fuel consumption....

  • Page 253

    Tire pressures change by approximately 1 psi (7 kpa) per 12°f (7°c) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in the winter. Example: if garage temperature = 68°f (20°c) and the outside temperature = 32°f (0°c) then the cold tire inflation p...

  • Page 254

    • the puncture is no greater than a ¼ of an inch (6 mm). Consult an authorized tire dealer for tire repairs and additional information. Damaged run flat tires, or run flat tires that have experienced a loss of pressure should be replaced immediately with another run flat tire of identical size and s...

  • Page 255

    Snow tires some areas of the country require the use of snow tires during the winter. Snow tires can be identified by a “mountain/snowflake” symbol on the tire sidewall. If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of f...

  • Page 256

    Caution! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with a compact or limited use temporary spare installed. Damage to the vehicle may result. Spare tire matching original equipped tire and wheel — if equipped your vehicle may be equipped with a s...

  • Page 257

    Collapsible spare tire — if equipped the collapsible spare is for temporary emergency use only. You can identify if your vehicle is equipped with a collapsible spare by looking at the spare tire descrip- tion on the tire and loading information placard located on the driver’s side door opening or on...

  • Page 258

    Limited use spare — if equipped the limited use spare tire is for temporary emergency use only. This tire is identified by a label located on the limited use spare wheel. This label contains the driving limitations for this spare. This tire may look like the original equipped tire on the front or re...

  • Page 259

    These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes a 1/16 of an inch (1.6 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to “replacement tires” in this section for further information....

  • Page 260

    Replacement tires the tires on your new vehicle provide a balance of many characteristics. They should be inspected regu- larly for wear and correct cold tire inflation pressures. The manufacturer strongly recommends that you use tires equivalent to the originals in size, quality and performance whe...

  • Page 261

    Caution! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Tire chains (traction devices) use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard against damage. • traction device must be ...

  • Page 262

    Tire rotation recommendations the tires on the front and rear of your vehicle operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires. The benefits of rotation a...

  • Page 263

    Treadwear the treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relativ...

  • Page 264

    Warning! The temperature grade for this tire is established for a tire that is properly inflated and not over- loaded. Excessive speed, under-inflation, or ex- cessive loading, either separately or in combina- tion, can cause heat buildup and possible tire failure. Tire pressure monitoring system (t...

  • Page 265

    30 psi (207 kpa). If the ambient temperature is 68°f (20°c) and the measured tire pressure is 27 psi (186 kpa), a temperature drop to 20°f (-7°c) will decrease the tire pressure to approximately 23 psi (159 kpa). This tire pressure is sufficiently low enough to turn on the tire pressure monitoring t...

  • Page 266

    • the tpms is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire gauge, even if under-inflation has not reached the level to trigger illumination of the tire pressure monitoring telltale light. • seasonal tem...

  • Page 267

    Activated and the “service tire pressure monitoring system” text message will display. If the ignition is cycled, this sequence will repeat providing the system fault still exists. The tire pressure monitoring telltale light will turn off when the fault condition no longer exists. A system fault can...

  • Page 268

    General information the following regulatory statement applies to all radio frequency (rf) devices equipped in this vehicle: this device complies with part 15 of the fcc rules and with industry canada license-exempt rss standard(s). Operation is subject to the following two conditions: (1) this devi...

  • Page 269

    The use of reformulated gasoline is recommended. Properly blended reformulated gasoline will provide improved performance and durability of engine and fuel system components. Gasoline/oxygenate blends some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol. Caution! Do not use ga...

  • Page 270

    Materials added to fuel besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion, and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle per- formance...

  • Page 271

    Note: intentional tampering with the emissions con- trol system can result in civil penalties being assessed against you. Carbon monoxide warnings warning! Carbon monoxide (co) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • do not inhale exhaust gase...

  • Page 272

    Note: a funnel is provided (located in the tool bag or cargo floor area in the rear cargo area) to open the flapper door to allow for emergency refueling with a gas can. Funnel location inside of tool kit funnel location for vehicle with optional spare tire 270 starting and operating.

  • Page 273

    Caution! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Warning! • never have any smoking materials lit in or near the vehicle when the fuel door is open or the tank is being filled. • never add fuel when the engine is running. This is in violation of most stat...

  • Page 274

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheels off the ground automatic transmission flat tow none not allowed dolly tow front ok rear not allowed on trailer all ok note: when towing your vehicle, always follow ap- plicable state and p...

  • Page 275

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . .274 䡵 if your engine overheats . . . . . . . . . .274 䡵 wheel and tire torque specifications . . . . . . . . . . . . . . . . . . . . .275 ▫ torque specifications . . . . . . . . . . . . . . . . . .275 䡵 tire service kit ...

  • Page 276

    Hazard warning flashers the hazard warning flasher switch is located on the instrument panel below the radio. Push the switch to turn on the hazard warning flashers. When the switch is activated, all direc- tional turn signals will flash on and off to warn oncom- ing traffic of an emergency. Push th...

  • Page 277

    Caution! Driving with a hot cooling system could damage your vehicle. If the pointer rises to the h (red) mark, the instrument cluster will sound a chime. When safe, pull over and stop the vehicle with the engine at idle. Turn off the air conditioning and wait until the pointer drops back into the n...

  • Page 278

    Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighte...

  • Page 279

    Tire service kit if a tire is punctured, you can make a first emergency repair using the tire service kit located in the rear storage area under the cargo floor. Tire punctures of up to 1/4 of an inch (6mm) can be repaired; the kit can be used in all weather conditions. Do not remove the foreign obj...

  • Page 280

    Warning! (continued) • if you are unsure of the condition of the tire or the wheel. • keep tire service kit away from open flames or heat sources. • a loose tire service kit thrown forward in a collision or hard stop could endanger the occu- pants of the vehicle. Always stow the tire service kit in ...

  • Page 281

    Drive the vehicle, as the tire is too damaged, contact the nearest authorized dealer. Warning! Tire service kit is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using tire service kit. Do not exceed 65 mph (110 km/h) until the tire is repaired or replaced. ...

  • Page 282

    Jacking and tire changing — if equipped warning! • do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • being under a jacked-up vehicle is dangerous. The vehi...

  • Page 283

    Spare tire removal the spare tire is stowed in underneath the rear cargo area on the outside of the vehicle. 1. Remove the cargo floor to access the winch. 2. Remove the jack handle and use the wrench end to lower the spare tire. 3. When the spare is clear, replace the jack tools. Preparations for j...

  • Page 284

    3. Set the parking brake. 4. Place the gear selector in park. 5. Turn the ignition to the off position. 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if changing the right front tire, block the left rear wheel. Note: passengers should not rem...

  • Page 285

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare tire, jack and wheel bolt wrench. 2. If equipped with aluminum wheels where the center cap covers the wheel bolts, use the wheel bolt wren...

  • Page 286

    Note: there are front and rear jacking locations on each side of the body (as indicated by the triangular lift point symbols on the sill molding). 4. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw clockwise to firmly engage the jack saddle with the lift...

  • Page 287

    8. Install the wheel bolts with the threaded end of the wheel bolt toward the wheel. Lightly tighten the wheel bolts. Warning! • to avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in p...

  • Page 288

    Jump-starting procedure if your vehicle has a discharged battery, it can be jump-started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done improp- erly so please follow the procedures in this section care...

  • Page 289

    Warning! (continued) • remove any metal jewelry such as rings, watch bands and bracelets that could make an inadver- tent electrical contact. You could be seriously injured. • batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas which is flammable and explosive. ...

  • Page 290

    Follow these steps to disconnect the negative (-) battery cable: 1. Pull outward on the negative (-) battery cable termi- nal release lever to the open position. 2. Lift up on the negative (-) battery cable terminal and set aside. Connecting the jumper cables 1. Connect the positive (+) end of the j...

  • Page 291

    3. Disconnect the positive (+) jumper cable from the positive (+) post of the booster battery. 4. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the dis- charged vehicle. Note: the negative (-) battery cable must be con- nected to the negative (-) post of ...

  • Page 292

    Caution! (continued) for at least one minute after every five rocking- motion cycles. This will minimize overheating and reduce the risk of transmission failure during pro- longed efforts to free a stuck vehicle. Note: push the ⬙esc off⬙ switch, to place the elec- tronic stability control (esc) syst...

  • Page 293

    Gear selector override if a malfunction occurs and the gear selector cannot be moved out of the park position, you can use the following procedure to temporarily move the gear selector: 1. Turn the engine off. 2. Firmly apply the parking brake. 3. Using a screwdriver or similar tool, carefully sepa-...

  • Page 294

    Towing a disabled vehicle note: this section describes procedures for towing a disabled vehicle using a commercial towing service. Towing condition wheels off the ground automatic transmission flat tow none not allowed dolly tow rear not allowed front ok flatbed all best method proper towing or lift...

  • Page 295

    If the ignition key is unavailable, or the battery is discharged, refer to “gear selector override” in this section for instructions on shifting the transmission out of park in order to move the vehicle. Caution! • do not flat tow any vehicle equipped with an automatic transmission. Damage to the dr...

  • Page 296

    6. Pull the release tab downwards using one hand and with the other one remove the key, sliding it out- wards. 7. Once the key is removed, reinstall the steering col- umn cover. Caution! It is advisable to contact your authorized dealer to have the reinstall procedure carried out. If you would like ...

  • Page 297

    Enhanced accident response system (ears) this vehicle is equipped with an enhanced accident response system. Please refer to “occupant restraint systems” in “things to know before starting your vehicle” for further information on the enhanced accident response sys- tem (ears) function. Event data re...

  • Page 299

    Maintaining your vehicle contents 䡵 engine compartment — 1.4l turbo . . .299 䡵 onboard diagnostic system — obd ii .299 ▫ onboard diagnostic system (obd ii) cybersecurity . . . . . . . . . . . . . . . . . . . . . . .300 䡵 replacement parts . . . . . . . . . . . . . . . . .301 䡵 dealer service . . . ....

  • Page 300

    ▫ headlamps low beam and high beam. . . . .335 ▫ front turn signal, parking and daytime running lamps. . . . . . . . . . . . . . . . . . . . . .337 ▫ front fog lamps . . . . . . . . . . . . . . . . . . . . .338 ▫ front, rear roof lamps . . . . . . . . . . . . . . . .338 ▫ rear tail, stop, backup and...

  • Page 301

    Engine compartment — 1.4l turbo onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and transmis- sion control systems. When these systems are operating properly, your...

  • Page 302

    If any of these systems require service, the obd ii system will turn on the “malfunction indicator light (mil)”. It will also store diagnostic codes and other information to assist your service technician in making repairs. Although your vehicle will usually be drivable and not need towing, see your...

  • Page 303

    Replacement parts use of genuine parts for normal/scheduled mainte- nance and repairs is highly recommended to ensure the designed performance. Damage or failures caused by the use of parts which are not quality-equivalent to genuine parts for maintenance and repairs will not be covered by the manuf...

  • Page 304

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended mainte- nance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, or air condition...

  • Page 305

    Note: under no circumstances should oil change intervals exceed 10,000 miles (16,000 km), twelve months or 350 hours of engine run time, whichever comes first. The 350 hours of engine run or idle time is generally only a concern for fleet customers. Engine oil selection for best performance and maxi...

  • Page 306

    Engine oil filter selection this manufacturer’s engines have a full-flow type dis- posable oil filter. Use a filter of this type for replace- ment. The quality of replacement filters varies consid- erably. Only high quality filters should be used to assure most efficient service. Mopar engine oil fi...

  • Page 307

    Warning! (continued) a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling. • the battery in this vehicle has a ...

  • Page 308

    Caution! Do not use chemical flushes in your air condition- ing system as the chemicals can damage your air conditioning components. Such damage is not cov- ered by the new vehicle limited warranty. Refrigerant recovery and recycling hfo 1234yf hfo 1234yf air conditioning refrigerant is a hydro- flu...

  • Page 309

    5. Open the air filter access door. 6. Remove the particulate air filters from the hvac air inlet housing. Pull the filter elements straight out of the housing. A/c air filter access door a/c air filter access door open 7 maintaining your vehicle 307.

  • Page 310

    7. Install the a/c air filter with the air filter position indicators pointing in the same direction as removal. Caution! The cabin air filter is identified with an arrow to indicate airflow direction through the filter. Failure to properly install the filter will result in the need to replace it mo...

  • Page 311

    Wiper blades clean the rubber edges of the wiper blades, the wind- shield, and rear window periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt, waxes, or road film, and help reduce streaking and smearing. Operation of the wipers on dry glas...

  • Page 312

    Function deactivation: the functionality is reset if: • the ignition is turned to the mar/run position. • number of subsequent activations is three. • two minutes timer has expired after turning the ignition off. Note: when turning the ignition on, the blades will go into the parking position. Front...

  • Page 313

    3. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly push the wiper blade until it snaps into place. Adding washer fluid the windshield washer fluid reservoir is located in the engine compartment, and the fluid level should be checked at regular in...

  • Page 314

    The vehicle is raised for lubrication or oil change. Replace as required. Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breath- ing co, refer to “safety ti...

  • Page 315

    The vehicle, turn off the engine and allow it to cool. Service, including a tune-up to manufacturer’s specifi- cations, should be obtained immediately. To minimize the possibility of catalytic converter dam- age: • do not shut off the engine or interrupt the ignition, when the transmission is in gea...

  • Page 316

    Coolant checks check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti- freeze). Check...

  • Page 317

    Caution! (continued) • do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use addi- tional rust inhibitors or antirust products, as they may not be compatible with the engine coolant and may plug the radiator. • this vehicle has not been designed for use with propyl...

  • Page 318

    Note: • it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the area where the vehicle is operated. • some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to ...

  • Page 319

    Remain in puddles on the ground. If ingested by a child or pet, seek emergency assistance immediately. Clean up any ground spills immediately. Coolant level the coolant expansion bottle provides a quick visual method for determining that the coolant level is ad- equate. With the engine off and cold,...

  • Page 320

    May result in unsatisfactory engine coolant (anti- freeze) performance, poor gas mileage, and increased emissions. Brake system in order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “maintenance schedule” for the proper maintenance in...

  • Page 321

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 322

    Leaks. Avoid using transmission sealers as they may adversely affect seals. Caution! Do not use chemical flushes in your transmission as the chemicals can damage your transmission com- ponents. Such damage is not covered by the new vehicle limited warranty. Fluid level check the fluid level is prese...

  • Page 323

    Hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- body protection. The following maintenance recommendations will en- able you to obtain maximum benefit from the corrosion resistance built into your vehicle. What causes corrosion? Corrosion...

  • Page 324

    Special care • if you drive on salted or dusty roads, or if you drive near the ocean, hose off the undercarriage at least once a month. • it is important that the drain holes in the lower edges of the doors, rocker panels, and trunk be kept clear and open. • if you detect any stone chips or scratche...

  • Page 325

    Caution! (continued) harsh brushes. These products and automatic car washes may damage the wheel’s protective finish. Such damage is not covered by the new vehicle limited warranty. Only car wash soap, mopar wheel cleaner or equivalent is recommended. When cleaning extremely dirty wheels including e...

  • Page 326

    Stain repel fabric cleaning procedure — if equipped stain repel seats may be cleaned in the following manner: • remove as much of the stain as possible by blotting with a clean, dry towel. • blot any remaining stain with a clean, damp towel. • for tough stains, apply mopar total clean, or a mild soa...

  • Page 327

    Caution! • direct contact of air fresheners, insect repellents, suntan lotions, or hand sanitizers to the plastic, painted, or decorated surfaces of the interior may cause permanent damage. Wipe away immedi- ately. • damage caused by these type of products may not be covered by your new vehicle limi...

  • Page 328

    Instrument panel bezels caution! When installing hanging air fresheners in your vehicle, read the installation instructions carefully. Some air fresheners will damage the finish of painted or decorated parts if allowed to directly contact any surface. Cleaning plastic instrument cluster lenses the l...

  • Page 329

    Fuses warning! • when replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Failure to use proper fuses may resu...

  • Page 330

    Cavity maxi fuse mini fuse description f03 20 amp yellow – ignition switch f04 40 amp orange – anti-lock brake pump f05 70 amp tan – electric power steering f06 30 amp green – radiator fan - low speed f07 50 amp red – radiator fan - high speed f08 40 amp orange – blower motor f09 – – not used f09 – ...

  • Page 331

    Cavity maxi fuse mini fuse description f23 – 20 amp yellow anti-lock brake valves f30 – 5 amp tan after run pump f81 70 amp tan – ptc (secondary) f82 40 amp orange – transmission f83 40 amp orange – ptc (primary) f84 – 7.5 amp brown transmission f85 – 15 amp blue front power outlet 12v f88 – 7.5 amp...

  • Page 332

    Cavity vehicle fuse num- ber mini fuse description 1 f12 7.5 amp brown right low beam 2 f32 7.5 amp brown front and rear ceiling lights trunk and door courtesy lights fuse panel cavity locations 330 maintaining your vehicle.

  • Page 333

    Cavity vehicle fuse num- ber mini fuse description 3 f53 7.5 amp brown instrument panel node 4 f38 20 amp yellow central door locking 5 f36 15 amp blue diagnostic socket, vehicle radio, climate control system, tpms, sunroof 6 f90 7.5 amp brown left high beam 7 f91 7.5 amp brown right high beam 8 f92...

  • Page 334

    Cavity vehicle fuse num- ber mini fuse description 19 f49 5 amp tan exterior mirror, gps, electric mirror, park- ing sensor 20 f31 5 amp tan climate control, seat regulation 21 f47 20 amp yellow driver power window rear interior fuses the rear interior fuse panel is located on the driver’s side in t...

  • Page 335

    Cavity vehicle fuse num- ber mini fuse description 3 f64 20 amp yellow hi fi system 4 f65 20 amp yellow sun blind 5 f66 20 amp yellow sunroof vehicle storage if you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery. • disconnect the negative ca...

  • Page 336

    Replacement bulbs interior bulbs bulb number overhead lamp c5w sun visors c5w courtesy lamp w5w glove compartment c5w rear courtesy lamp c5w exterior bulbs bulb number front low and high beam headlamp hir2ll front turn signal lamps wy21w front parking/daytime running lamps w21/5w front side marker l...

  • Page 337

    Bulb number center high mounted stop lamp led (see authorized dealer) front fog lamps h11 rear fog lamps - if equipped w16w license plate lamps w5w note: numbers refer to commercial bulb types that can be purchased from your authorized dealer. If a bulb needs to be replaced, visit your authorized de...

  • Page 338

    3. Remove the bulb when all the tabs are aligned with the openings in the metal holder. 4. Disconnect the electrical connector from the bulb. 5. Install the new bulb and rotate clockwise to lock in place. Bulb removal procedure electrical connector removal 336 maintaining your vehicle.

  • Page 339

    6. Reinstall the plastic cap. Front turn signal, parking and daytime running lamps 1. Turn front wheels inboard to access upper cover in wheel liner. 2. Open the upper cover on the front of the wheel liner. 3. Remove the cap from the back of the lower headlamp housing. 4. Rotate the bulb countercloc...

  • Page 340

    6. Reinstall the plastic cap and close the cover on the wheel liner. Front fog lamps to replace the front fog lights, see your authorized dealer. Front, rear roof lamps 1. Remove two screw and remove the lamp assembly. 2. Remove the socket bulb by turning counterclock- wise. 3. Remove bulb and repla...

  • Page 341

    Fluid capacities u.S. Metric fuel (approximate) 13.1 gallons 50 liters engine oil with filter 1.4l turbo engine 4 quarts 3.8 liters cooling system 1.4 liter turbo engine (mopar antifreeze/engine coolant 10 year/150,000 mile formula). 6.1 quarts 5.8 liters fluids, lubricants, and genuine parts engine...

  • Page 342

    Component fluid, lubricant, or genuine part engine oil filter – 1.4l turbo engine we recommend you use mopar engine oil filter. Spark plugs – 1.4l turbo engine we recommend you use mopar spark plugs. Fuel selection – 1.4l turbo engine 91 octane recommended – 87 octane acceptable, 0-15% ethanol. Caut...

  • Page 343

    Chassis component fluid, lubricant, or genuine part automatic transmission use only mopar aw-1 automatic transmission fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake master cylinder we recommend you use mopar dot 4. If dot 4 br...

  • Page 345

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . .344 ▫ maintenance chart . . . . . . . . . . . . . . . . . . .345 8.

  • Page 346

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate in th...

  • Page 347

    Maintenance chart required maintenance intervals . Refer to the maintenance schedules on the following page for the required maintenance intervals. At every oil change interval as indicated by oil change indicator system: • change oil and filter. • rotate the tires. Rotate at the first sign of irreg...

  • Page 348

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 349

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 351

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . . . . .350 ▫ prepare for the appointment. . . . . . . . . . . .350 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . .350 ▫ be reasonable with requests . . . ....

  • Page 352

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to bring the right papers with you, as well as your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the ser- vice...

  • Page 353

    Any communication to the manufacturer’s customer center should include the following information: • owner’s name and address • owner’s telephone number (home and office) • authorized dealer name • vehicle identification number (vin) • vehicle delivery date and mileage fiat customer center p.O. Box 2...

  • Page 354

    Service contract you may have purchased a service contract for a vehicle to help protect you from the high cost of unexpected repairs after the manufacturer’s new vehicle limited warranty expires. The manufacturer stands behind only the manufacturer’s service contracts. If you purchased a manufactur...

  • Page 355

    Reporting safety defects in the 50 united states and washington, d.C. If you believe that your vehicle has a defect that could cause a crash or cause injury or death, you should immediately inform the national highway traffic safety administration (nhtsa) in addition to notifying fca us llc. If nhts...

  • Page 356

    Service manuals these comprehensive service manuals provide the in- formation that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintaining, servicing, and repairing fca us llc vehicles. A complete working knowledge of the vehicle, system, and/or compone...

  • Page 357

    Index 10

  • Page 358

    Adding engine coolant (antifreeze) . . . . . . . . . . .315 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . .269 adding washer fluid . . . . . . . . . . . . . . . . . . . . .311 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . .268 air bag air bag operation . . . ....

  • Page 359

    Belts, seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 body mechanism lubrication . . . . . . . . . . . . . . . .308 b-pillar location . . . . . . . . . . . . . . . . . . . . . . . . .244 brake assist system . . . . . . . . . . . . . . . . . . . . . .233 brake fluid . . . . . . . ...

  • Page 360

    Compact spare tire . . . . . . . . . . . . . . . . . . . . . . .254 connector uci . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190 universal consumer interface (uci) . . . . . . . . .190 contract, service . . . . . . . . . . . . . . . . . . . . . . . . .352 coolant (antifreeze) . ....

  • Page 361

    Emergency trunk release . . . . . . . . . . . . . . . . . . .24 engine air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . .304 break-in recommendations . . . . . . . . . . . . . . . .64 checking oil level . . . . . . . . . . . . . . . . . . . . .302 compartment . . . . . . . . . . . . . ....

  • Page 362

    Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 octane rating . . . . . . . . . . . . . . . . . . . . . . . . .266 requirements . . . . . . . . . . . . . . . . . . . . . . . . .266 tank capacity . . . . . . . . . . . . . . . . . . . . . . . .339 fueling . . . . . . . . . . . . . ...

  • Page 363

    Passive entry programming . . . . . . . . . . . . . . .182 unlock liftgate . . . . . . . . . . . . . . . . . . . . . . . .182 key, replacement . . . . . . . . . . . . . . . . . . . . . . . . .13 keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 key, sentry (immobilizer) . . ...

  • Page 364

    Methanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 automatic dimming . . . . . . . . . . . . . . . . . . . . .74 electric powered . . . . . . . . . . . . . . . . . . . . . . .76 electric remote . . . . . ....

  • Page 365

    Pregnant women and seat belts . . . . . . . . . . . . . .32 preparation for jacking . . . . . . . . . . . . . . . . . . . .281 pretensioners seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 radial ply tires . . . . . . . . . . . . . . . . . . . . . . . . .251 radio frequency ge...

  • Page 366

    Operating instructions . . . . . . . . . . . . . . . . . . .30 pregnant women . . . . . . . . . . . . . . . . . . . . . . .32 pretensioners . . . . . . . . . . . . . . . . . . . . . . . . . .33 rear seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 reminder . . . . . . . . . . . . . ....

  • Page 367

    General information . . . . . . . . . . . . . .249, 253, 254 high speed . . . . . . . . . . . . . . . . . . . . . . . . . .251 inflation pressures . . . . . . . . . . . . . . . . . . . . .250 jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280 life of tires . . . . . . . . . . . . ....

  • Page 368

    Untwisting procedure, seat belt . . . . . . . . . . . . . . .32 vehicle identification number (vin) . . . . . . . . . . . .6 vehicle loading . . . . . . . . . . . . . . . . . . . . . . . . .246 vehicle modifications/alterations . . . . . . . . . . . . . .7 vehicle security alarm (security alarm) . ....

  • Page 369

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be obs...

  • Page 370

    O w n e r ’ s m a n u a l 2 0 1 7 2017 fia t ® 500l first edition rev 1 printed in u.S.A. ©2016 fca us llc. All rights reserved. Fiat is a registered trademark of fca group marketing s.P.A., used under license by fca us llc. 17bf-126-aa fiat ® 500l 16bf-126-ab second edition.