Fiat Barchetta Owner's Handbook Manual - page 51

50

8) Connect the heated rear window’s

electrical connector to the connector

located under the left side panel.

9)  Working from inside the car,

swing the sun visors down and lock

the hard top in position on the wind-

screen transom by turning the handles

fig. 64.

REMOVAL

1) Working from inside the car, low-

er the sun visors and release the hard

top from the windscreen transom by

pulling down and turning the handles

fig. 65 towards the inside of the car.

2) Remove the side panels A-fig. 66

from the hard top’s upholstery by un-

doing fixing screws B.

3) Disconnect the heated rear win-

dow’s electrical connector from the

connector located under the left side

panel.

4) Push red safety buttons A-fig. 67

upwards and release levers B.

5) Release hooks C from holes D

(for the sole purpose of better show-

ing anchorage points D in fig. 67, the

guard on the car has been removed).

6) Working from outside the car,

and with someone else to lend a hand,

raise the hard top and move it back-

wards.

7) Refit side panels A-fig. 66 over

the hard top upholstery and fix them

with screws B. 

fig. 64

P5S00736m

fig. 65

P5S00737m

fig. 67

P5S00738m

fig. 66

P5S00739m