Foxtech FH310IR-TR Manual - page 7
FOXTECH HOBBY
Co., Ltd
Add:
(3rd Floor) No.9 Haitai Fazhan Sixth Avenue
XiQing District Tianjin China
Web: www.foxtechfpv.com
Gimbal control
1)Yaw axis control:speed mode,connect Stick channel(or 3-position switch channel,
push stick to middle position to stop)
2)Pitch axis control:speed mode,connect Stick channel(or 3-position switch
channel, push stick to middle position to stop)
3)Mode control:angle mode,connect knob channel(speed mode: connect
3-position switch channel or rocker channel)
If connecting knob channel,rotate to one end,the gimbal is at lowest speed when
controlling YAW and PITCH axis.
Rotate the knob to any position,gimbal is at higher speed when controlling YAW and
PITCH axis.Rotate to knob to another end,gimbal back to center position.
4)Multi:tracking control,connect 3-position switch channel
Middle to low:quit tracking mode,cursor disappear
Low to middle:go to tracking mode,cursor appear
Middle to high:one square appears,object is locked,tracking is activated
Middle to high again:re-track mode,cursor appears in the square.Gimbal is still
tracking the object,now you can move the cursor to track another object(middle to
high stick again).
Camera control
1)Zoom control:daylight sensor zoom control,connect 3-position switch or stick channel
2)Focus:Picture in picture switch and palette switch,connect 3-position switch channel. Middle
to Low:palette switch.
Middle to High:picture in picture switch.
3)PIC/REC:taking picture/recording,connect 3-position
switch
channel Middle to high,recording start
Middle to high again,recording stop
Middle to low,taking picture
Middle to low,taking another picture