Foxtech FH310Z User Manual - page 6
FOXTECHFPV.COM
6
Position-3,Lock Mode: gimbal moves with low speed,head locked (gimbal Yaw only controlable by radio con
troller)
Position-2, Follow Mode: gimbal moves at high speedпј€gimbal yaws while the airframe is yawing).
Switch fast 1 time between position-2 and position-1, gimbal yaw axis returns to the centre position.
Switch fast 2 times between position-2 and position-1,gimbal tilt and roll axis return to the level position.
Switch fast 3 times between position-2 and position-1,gimbal gyro calibrating.
Switch fast 4 times between postion-2 and postion-1, gimbal gyro tempreture calibrating; please re start gi
mbal after calibration finished.
Switch fast 5 times between postion-2 and position-1,gimbal accelerator calibrating.
Note: Normally, please do not calibrate the gyro and accelerator, improper operation could result in gimbal
malfunction!
Gimbal Wire Diagram
Gimbal Working Model Introduction (3-Postion Switch required)