Foxun SX-EX11 Operating Instructions - page 3
Operating Instructions
3
*Note: When the sink can’t display the signal ,try to connect HDMI transmitter to the display device,
plug the power supply into Transmitter, press the “EDID copy button” and the light flashes, the EDID
data has been from the display device successfully, at least press ”EDID copy button” for 3 seconds,
The EDID will be reset to the default setting.
2) Connect CAT5e or 6cables to both the outputs of the transmitter and inputs of the Receiver. (The
cables must follow the standard of EIA-TIA 568B).
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
1. Status of signal connection 2. HDMI output 3. Status of power input
(d) The unit does not operate normally or exhibits a marked change in performance;
1) Connect the HDMI signal sources (Such as PS3, STB etc) to HDMI Transmitter.
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
(a) The DC power supply cord or AC adaptor has been damaged;
Receiver Panel
The unit should be serviced by qualified service personnel if:
4. CAT-5E/6 input 5. Power input
(e) The unit has been dropped or the cabinet damaged.
CONNECTING AND OPERATING
Attention: Insert/Extract cables gently.
MAINTENANCE
PRODUCT SERVICE
1) Damage requiring service:
(b) Objects or liquids have gotten into the unit;
(c) The unit has been exposed to rain;