1. DL manuals
  2. Foxun
  3. Matrix Switcher
  4. SX-SMX44
  5. Operating Instructions Manual

Foxun SX-SMX44 Operating Instructions Manual

Manual is about: 4x4 Seamless HDMI matrix & 2x2 Video Wall Controller

Summary of SX-SMX44

  • Page 1

    1 4x4 seamless hdmi matrix & 2x2 video wall controller model no: sx-smx44 operating instructions dear customer thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this ...

  • Page 2

    2 table of contents specifications package contents panel descriptions connecting and operating typical application control via remote control via rs232 ip control maintenance product service warranty specifications packing contents 1). 4x4 matrix (sx-smx44) x1 2). Remote controller x1 3). Cd rom (u...

  • Page 3

    3 panel descriptions ① power on/off. ② these led indicates the status of each output selection. ③ ir receive window. ④ input button in1~4: choose the desired input port from ports 1~4. ⑤ output button out1~4: choose the desired output port from ports 1~4. ⑥ all: press this button to set all the outp...

  • Page 4

    4 connecting and operating 1. Connect source devices to input ports of sx-smx44 2. Connect hdmi output port to tv or other hdmi sink devices. 3. Optional: connect rs232 cable from pc rs232 port . 4. Optional: connect an ethernet cable from the tcp/ip port on the matrix to a local area network. 5. Co...

  • Page 5

    5 1. Control via remote ① power on/off. ② matrix mode button. ③ video wall mode button. ④ output button: output 1/output 2/output 3/ output 4. ⑤ ptp button: output 1 display input 1, output 2 display input 2, output 3 display input 3, output 4 display input 4. ⑥ click “x” to close the output port. F...

  • Page 6

    6 2. Control via rs232 1) switch setting ① matrix mode: select the input port for output 1~4. ② video wall mode: all the four output will show the different part of the same input source. ③ on: factory defaults setting is all output is on, the button is green. Click “out1, out2, out3, out4”, it will...

  • Page 7

    7 the border line will decrease in vertical direction the border line will increase in vertical direction the border line will decrease in horizontal direction the border line will increase in horizontal direction 3) ip setting click ok button to set ip address for lan control (for example: 192.168....

  • Page 8

    8 5) rs232 command 6) web password reset the command length is 4 bytes. Rpw+ ‘ ↙ ’ “rpw” is the key word , ‘ ↙ ’ is carriage return. When you send the web password reset command to sx-smx44, if succeed, it will feedback "rpw", and the web password will be set as "0000000000". 3. Ip control note: use...

  • Page 9

    9 2).Click “web browser” button. A web browser will be shown. The default password is "0000000000", input the password and login. The device controller page will be displayed. Maintenance clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. Product ...

  • Page 10

    10 （ 4 ） safety check: after repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Warranty if your product does not work properly because of a defect in materials or workmanship, our company (referred to as "the warrantor" ) will, for...