1. DL manuals
  2. FPI
  3. Indoor Fireplace
  4. Hampton H25-LP
  5. Owners & Installation Manual

FPI Hampton H25-LP Owners & Installation Manual - Hampton

Manual is about: Direct Vent Gas Fireplace

Summary of Hampton H25-LP

  • Page 1

    Fpi fireplace products international ltd. 6988 venture st., delta, bc canada, v4g 1h4 918-101b models: h25-ng natural gas h25-lp propane 01/09/06 h25 direct vent gas fireplace owners & installation manual warning: if the information in these instructions are not followed exactly, a fire or explosion...

  • Page 2: Hampton

    2 hampton h25 direct vent freestanding gas stove hampton direct vent freestanding gas stove unit dimensions to the new owner: congratulations! You are the owner of a state-of-the-art hampton gas stove by fpi fireplace products international ltd. The h25 is a hand crafted appliance and has been desig...

  • Page 3: Table of Contents

    Hampton h25 direct vent freestanding gas stove 3 table of contents page page cathedral ceiling installations .................................. 25 support extension - round or square ....................... 25 high elevation ......................................................... 25 gas connection...

  • Page 4: Safety Label

    4 hampton h25 direct vent freestanding gas stove this is a copy of the label that accompanies each direct vent freestanding gas stove. We have printed a copy of the contents here for your review. Safety label copy of safety label for h25-ng & h25-lp note: hampton units are constantly being improved....

  • Page 5: Important:

    Hampton h25 direct vent freestanding gas stove 5 important: save these instructions the direct vent freestanding gas stove must be installed in accordance with these instruc- tions. Carefully read all the instructions in this manual first. Consult the building authority hav- ing jurisdiction to dete...

  • Page 6: Installation

    6 hampton h25 direct vent freestanding gas stove installation 5) this appliance is listed for alcove installa- tions, maintain minimum alcove clearances as follows, minimum width of 34-3/4" (882mm), a maximum depth of 36" (914mm), and minimum ceiling height of 51" (1295mm) from floor to ceiling. 6) ...

  • Page 7: Locating  Your

    Hampton h25 direct vent freestanding gas stove 7 locating your gas stove when selecting a location for your stove, en- sure that the clearances listed above are met as well as ensuring that there is adequate acces- sibility for servicing and proper operation. Manufactured mobile home additional requ...

  • Page 8: Installation

    8 hampton h25 direct vent freestanding gas stove installation 9) place the blower close to the base of the unit and feed the long red and black wires through the opening of the base of the unit and connect them to the thermodisc. 10) feed the short red and black wires through the small hole at the b...

  • Page 9: Installation

    Hampton h25 direct vent freestanding gas stove 9 installation precautions these venting systems are engineered prod- ucts that have been designed and tested for use with the h25-ng, and h25-lp. The warran- ty will be voided and serious fire, health or other safety hazards may result from any of the ...

  • Page 10: Installation

    10 hampton h25 direct vent freestanding gas stove exterior vent terminal locations a= clearance above grade, veranda, porch, deck, or balcony *(min. 12"/30cm) b= clearance to window or door that may be opened *(12"/30cm) c= clearance to permanently closed window *(min. 12"/30cm) d= vertical clearanc...

  • Page 11: Installation

    Hampton h25 direct vent freestanding gas stove 11 946-506/p vent guard (optional) 640-530/p riser vent terminal 946-205 vinyl siding shield for riser vent terminal 946-208/p vent guard (optional) - riser vent terminal 946-523/p astrocap horizontal cap 946-206 vinyl siding standoff - astrocap install...

  • Page 12: Rigid Pipe Venting Systems

    12 hampton h25 direct vent freestanding gas stove rigid pipe venting systems horizontal or vertical terminations alternate horizontal termination caps the fpi astrocap tm and fpi riser vent terminal is certified for installations using fpi venting systems as well as simpson dura-vent®, direct vent g...

  • Page 13: Installation

    Hampton h25 direct vent freestanding gas stove 13 installation offset to vertical terminations venting arrangements - horizontal terminations using dura-vent venting system dura-vent snorkel termination riser vent termination venting arrangements vertical terminations systems for residential manufac...

  • Page 14: Installation

    14 hampton h25 direct vent freestanding gas stove installation horizontal venting with two (2) 90 o elbows option v h + h1 a) 2' min. 4' max. B) 3' min. 5' max. C) 4' min. 6' max. D) 5' min. 7' max. E) 6' min. 8' max. Horizontal venting with two (2) 90 o elbows option h v h + h1 a) 1' max. 1' min. 3...

  • Page 15: Installation

    Hampton h25 direct vent freestanding gas stove 15 vertical venting with two (2) 90 o elbows option v h v + v1 a) 1' min. 4' max. 2' min. B) 2' min. 5' max. 3' min. C) 3' min. 6' max. 4' min. D) 4' min. 7' max. 5' min. E) 5' min. 8' max. 6' min. Vertical venting with two (2) 90 o elbows with these op...

  • Page 16: Installation

    16 hampton h25 direct vent freestanding gas stove venting arrangements - vertical terminations with co-linear flex system for both residential & manufactured homes into masonry fireplaces the shaded area in the diagram shows the allowable vertical terminations. Note: must remove 4 screws from stove ...

  • Page 17: Installation

    Hampton h25 direct vent freestanding gas stove 17 dv stove horizontal vent kit (#946-116 & #946-216) installation review the following sequence of instructions which are typical of most installations. The sequence may vary depending on wall thick- ness. Refer to pages 10 to 16 for vent location and ...

  • Page 18: Installation

    18 hampton h25 direct vent freestanding gas stove installation note: the pipe s e a m should be f a c i n g down. Note: to make the installation more aes- thetically pleasing, we recom- mend framing out a square that the cap can be mounted on. Note: if installing ter- m i n a t i o n o n a siding co...

  • Page 19: Installation

    Hampton h25 direct vent freestanding gas stove 19 installation residential and manufactured homes / mobile homes minimum horizontal termination installations you will require the following components with your new hampton rear vent direct vent freestanding gas stove. Please review your product to ma...

  • Page 20: Dura-Vent Termination Kit

    20 hampton h25 direct vent freestanding gas stove dura-vent basic horizontal kit # 970 1 90 o elbow 1 wall thimble cover 1 horiz. Sq. Term. Cap dura-vent termination kit planning your dura-vent installation there are two basic types of dura-vent direct vent system installations: horizontal termina- ...

  • Page 21: Installation

    Hampton h25 direct vent freestanding gas stove 21 installation dura-vent venting components the simpson dura-vent direct vent system offers a complete line of component parts for installation of both horizontal and vertical instal- lation. Many items are offered in decorative black, as well as galva...

  • Page 22: Dura-Vent Vertical

    22 hampton h25 direct vent freestanding gas stove diagram 7 dura-vent vertical termination 1) maintain the 1-1/4" clearances (air spaces) to combustibles when passing through ceilings, walls, roofs, enclo- sures, attic rafter, or other nearby combustible surfac- es. Do not pack air spaces with insul...

  • Page 23: Installation

    Hampton h25 direct vent freestanding gas stove 23 installation offset chart diagram 12 7) ensure vent is vertical and secure the base of the flashing to the roof with roofing rails, slide storm collar over the pipe section and seal with a mastic. 8) install the vertical termination cap by twist lock...

  • Page 24: Converting A Class-

    24 hampton h25 direct vent freestanding gas stove converting a class- a metal chimney or masonry chimney to a direct vent system there are two different types of direct vent conversion systems listed below. Follow the appropriate directions for your installation. A) through an existing factory built...

  • Page 25: Aeration

    Hampton h25 direct vent freestanding gas stove 25 aeration adjustment the burner aeration is factory set but may need adjusting due to either the local gas supply, air supply or altitude. Natural gas 3-16" (4.76 mm) propane 1/4" (6.4 mm) the aeration adjustment gears are located on the right side of...

  • Page 26: Installation

    26 hampton h25 direct vent freestanding gas stove installation this conversion must be done by a qualified gas fitter if in doubt do not do this conversion !! Gas pipe pressure testing the appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve du...

  • Page 27: Installation

    Hampton h25 direct vent freestanding gas stove 27 installer notice: these instructions must be left with the appliance. Burner orifice 7) unscrew the pilot orifice with the allen key and replace with the lp pilot orifice in the kit. 8) remove burner orifice with a 1/2" wrench and discard. Use a wren...

  • Page 28: Log Set Installation

    28 hampton h25 direct vent freestanding gas stove a) d) b) c) log set installation 1) shut off the gas supply. 2) lift off the cast top and remove the glass front (see manual). 3) carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into posit...

  • Page 29: Installation

    Hampton h25 direct vent freestanding gas stove 29 6) take the embers and place on the burner in the space between the 2 front logs. Do not put embers on the burner in the area between the front logs and the rear log. See photo below. 7) place the center cross log on the locating pin in the top of th...

  • Page 30: Optional Remote

    30 hampton h25 direct vent freestanding gas stove caution do not connect the millivolt remote control wires to the 120v wires. 3) install 3 aaa alkaline batteries in transmit- ter and 4 aa alkaline batteries in the receiver. Install the receiver and its cover in the wall. Switch the remote receiver ...

  • Page 31: Installation

    Hampton h25 direct vent freestanding gas stove 31 wiring diagram - h25-ng & h25-lp caution: label all wires prior to disconnection when servicing con- trols. Wiring errors can cause im- proper and dangerous operation. If any of the original wires as supplied with the appliance must be replaced, it m...

  • Page 32: Automatic

    32 hampton h25 direct vent freestanding gas stove automatic convection fan operation the fan operates automatically - turn the knob at the top right rear corner to adjust to the desired speed. The fan will turn on as the stove comes up to operating temperature. After the unit has been turned off and...

  • Page 33: Operating Instructions

    Hampton h25 direct vent freestanding gas stove 33 copy of the lighting plate instructions operating instructions.

  • Page 34: Maintenance

    34 hampton h25 direct vent freestanding gas stove maintenance top view of pilot flame maintenance instructions 1) always turn off the valve before cleaning. For relighting, refer to lighting instructions. Keep the burner and control compartment clean by brushing and vacuuming at least once a year. W...

  • Page 35: Fan Maintenance

    Hampton h25 direct vent freestanding gas stove 35 to remove fan: 1) unplug or disconnect power source to stove. 2) remove the rear access panel on the back of the stove by removing the 2 screws under the rear panel, then lift off the 2 screws at the top. Take care not to cut wires when lowering the ...

  • Page 36: Removing Valve

    36 hampton h25 direct vent freestanding gas stove 11) carefully lift the burner tray assembly out. Removing valve if your valve requires maintenance or replace- ment, use the following instructions: note: always close off the gas supply before removing the valve. 1) if optional fan is installed, dis...

  • Page 37: Parts List

    Hampton h25 direct vent freestanding gas stove 37 parts list main assembly 1) 942-421** casting - top 3) 942-381** casting - leg 4) 942-431** casting - side 5) 942-441** casting - front 6) 350-921** casting - front deco grill 7) 942-461** casting - skirt 8) 260350 gasket for rear relief plate 9) 290...

  • Page 38: Burner & Log Assembly

    38 hampton h25 direct vent freestanding gas stove burner & log assembly 350-574/p valve assembly s.I.T. - natural gas 60) 910-378 valve s.I.T. - natural gas 904-430 #42 orifice - n.G. 63) 910-190 piezo ignitor & nut 64) 908-672 control panel decal 65) 490-061 switch plate 936-170 orifice gasket 66) ...

  • Page 39: Warranty

    Hampton h25 direct vent freestanding gas stove 39 warranty hampton fireplace products are designed with reliability and simplicity in mind. In addition, our internal quality assurance team carefully inspects each unit thoroughly before it leaves our facility. Fpi fireplace products international ltd...

  • Page 40: Http://www.Hampton-Fire.Com

    Installer: please complete the following information dealer name & address: ________________________________________________ ______________________________________________________________________ installer: ______________________________________________________________ phone #: _____________________...