Fracino Cybercino User Manual - page 13
Cybercino Users Manual – Draft Edition – 7th
th
January 2009
13
[07]
exit cappuccino configuration
6.
To configure a large black coffee
a.
In general configuration mode, press button 08, followed by button 04. This will
enter the large black coffee configuration mode.
b.
Press button 04 again to step through the large black coffee configuration. The first
stage is the grind (preset by the grinder configuration mode).
c.
If this is acceptable, press button 04 again.
d.
The next stage is the water volume. To start the brew press button 04 and allow the
counter to cycle up.
e.
When the correct volume has been reached, press button 04 again.
f.
The setting will be stored. To confirm that this is acceptable, press button 02 to
produce a test large black coffee.
g.
Press button 07 to exit black coffee configuration mode.
SEQUENCE:
[08]
to prefix the configuration for large
[04]
to enter large black coffee configuration
[04]
step 1, grind time
[04]
step 2, water time start
[04]
step 2, water time stop
[02]
test large black coffee
[07]
exit large black coffee configuration
7.
To configure a large latte
a.
In general configuration mode, press button 07 followed by button 05. This will enter
the large latte configuration mode.
b.
Press button 05 again to step through the large latte configuration. The first stage is
the grind (preset by the grinder configuration mode).
c.
If this is acceptable, press button 05 again.
d.
The next stage is the water volume. To start the brew press button 05 and allow the
counter to cycle up.