1. DL manuals
  2. Fractal Audio
  3. Recording Equipment
  4. MFC-101
  5. Owner's Manual

Fractal Audio MFC-101 Owner's Manual

Other manuals for MFC-101: Owner's Manual
Manual is about: MARK II

Summary of MFC-101

  • Page 1

    2 doc v1.0.1 owner’s manual copyright © 2010 all rights reserved. No part of this publication may be reproduced in any form without the permission of fractal audio systems.

  • Page 3

    Doc v1.0.1 i important safety instructions warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Caution: to reduce the risk of fire or electric shock, do not remove screws. There are no user serviceable parts inside. Refer servicing to qualified se...

  • Page 4: Certificate Of Conformity

    Ii doc v1.0.1 certificate of conformity fractal audio systems, usa, hereby declares on its own responsibility that the following product mfc101 – midi foot controller that is covered by this certificate and marked with ce label conforms to following standards: en60065 (iec 60065) safety requirement ...

  • Page 5: Foreword

    Doc v1.0.1 iii foreword thank you for your purchase of the fractal audio systems mfc-101. Musical instrument foot control dates back to the 1200s, when organ pedals doubled the number of limbs which could be used by a single person during a performance. Centuries later, electric instruments were equ...

  • Page 6: Table Of Contents

    Contents fractal audio systems mfc-101 manual iv doc v1.0.1 table of contents foreword .......................................................................................... Iii table of contents .............................................................................. Iv 1 overview ..........

  • Page 7

    Fractal audio systems mfc-101 manual contents doc v1.0.1 v 5.1 axe-fx ia switches ................................................................................. 16 5.1.1 list of available axe-fx functions ...............................................................................................

  • Page 8

    Contents fractal audio systems mfc-101 manual vi doc v1.0.1 10 copy functions ...................................................................... 33 11 names ...................................................................................... 34 12 complete menu reference .........................

  • Page 9

    Fractal audio systems mfc-101 manual contents doc v1.0.1 vii 12.4.7 ia switch control change (cc#) settings ............................................................................................. 49 12.4.8 ia switch control change on/off values ....................................................

  • Page 10: Table of Figures

    Contents fractal audio systems mfc-101 manual viii doc v1.0.1 14 appendix .................................................................................. 67 14.1 comparison table: axe-fx mode on vs. Off ....................................... 67 14.2 firmware update error codes .....................

  • Page 11: Overview

    Fractal audio systems mfc-101 manual overview doc v1.0.1 1 1 overview 1.1 main features the fractal audio systems mfc-101 is a powerful, versatile, easy-to-use midi foot controller designed for use with the fractal audio systems axe-fx and/or any other midi devices such as modules, amps, effects, sy...

  • Page 12: 1.2

    Overview fractal audio systems mfc-101 manual 2 doc v1.0.1 1.2 hardware overview the mfc-101 has 21 heavy duty footswitches, each with its own bi-color led. Each footswitch has a primary function, labeled below it, while 14 of the switches also have secondary functions, labeled above. The main displ...

  • Page 13

    Fractal audio systems mfc-101 manual overview doc v1.0.1 3 presets are loaded). If this feature is enabled, the save footswitch led will flash when relevant changes are detected and this footswitch will function as save instead of edit. See p. 62 for more information. Up and down are used to select ...

  • Page 14

    Overview fractal audio systems mfc-101 manual 4 doc v1.0.1 1.2.3 rear panel features figure 1-4: mfc-101 back panel diagram power 9vac : plug the supplied ac adapter into this jack. If you are using an axe-fx or other device to supply phantom power to the mfc-101 over a 7-pin midi cable, you must in...

  • Page 15: 1.3

    Fractal audio systems mfc-101 manual overview doc v1.0.1 5 1.3 software map performance mode is always running while the mfc-101 is used normally as a midi foot controller. Depending on the desired function, it may be placed into one of three “operating modes”: preset , song or set mode . Axe-fx mod...

  • Page 16: 1.4

    Overview fractal audio systems mfc-101 manual 6 doc v1.0.1 1.4 navigating in edit mode the footswitches are used to navigate the menus, pages and parameters of edit mode. Figure 1-7: navigating edit mode to enter edit mode, press edit , followed by one of the 5 menu footswitches to open a menu. Each...

  • Page 17: Getting Connected

    Fractal audio systems mfc-101 manual getting connected doc v1.0.1 7 2 getting connected before making connections, be sure to turn down the volume of your amp and switch off all power! The mfc-101 supports a number of different setup scenarios. A few common possibilities are diagrammed below. 7-pin ...

  • Page 18

    Getting connected fractal audio systems mfc-101 manual 8 doc v1.0.1 important : be sure to use a high quality 5-conductor or 7-conductor cable for single cable connections with the axe-fx. Every standard midi cable has 5 pins on each end, but lower-quality cables may not have all 5 pins wired up! If...

  • Page 19: Basic Settings

    Fractal audio systems mfc-101 manual basic settings doc v1.0.1 9 3 basic settings 3.1 axe-fx mode axe-fx mode (turned on by default) makes using the mfc-101 easier and more intuitive. Axe-fx mode is fully independent of other modes and provides a number of capabilities and benefits when using the mf...

  • Page 20: 3.2

    Basic settings fractal audio systems mfc-101 manual 10 doc v1.0.1 3.2 axe-fx midi channel a factory-fresh mfc-101 expects the axe-fx to be on midi channel 1 (the unit’s default setting). If you have modified this setting in your axe-fx, you will need to make the same setting in the mfc-101 for axe-f...

  • Page 21: 3.4

    Fractal audio systems mfc-101 manual basic settings doc v1.0.1 11 3.4 operating modes the mfc-101 offers three different variants of performance mode, called “operating modes”. These are preset mode, song mode, and set mode. The details of these operating modes are covered throughout this manual. Ke...

  • Page 22: 3.5

    Basic settings fractal audio systems mfc-101 manual 12 doc v1.0.1 3.5 starting up preset mode+axe-fx mode on when the mfc-101 is used with an axe-fx, it will power up, query the axe-fx, and load whichever mfc-101 preset was loaded when the unit was last powered off. The mfc-101 preset number and the...

  • Page 23: Presets & Preset Mode

    Fractal audio systems mfc-101 manual presets & preset mode doc v1.0.1 13 4 presets & preset mode an mfc-101 preset is a set of pre-programmed midi instructions, able to be loaded from a preset footswitch and sent to your connected device(s). Preset mode provides a straightforward, logically organize...

  • Page 24: 4.2

    Presets & preset mode fractal audio systems mfc-101 manual 14 doc v1.0.1 4.2 bank style bank style determines which preset will load automatically (or not…) when a new bank or song is selected. The default behavior is for the mfc-101 preset corresponding to the current footswitch to be loaded. Other...

  • Page 25: 4.4

    Fractal audio systems mfc-101 manual presets & preset mode doc v1.0.1 15 4.4 other preset capabilities in addition to midi program change commands described above, presets also have the capability to send a number of additional midi commands: presets store a snapshot of ia switch on/off states, whic...

  • Page 26: Instant Access Switches

    Instant access switches fractal audio systems mfc-101 manual 16 doc v1.0.1 5 instant access switches instant access (ia) switches are typically used like traditional stompboxes to turn effects on or off, but with the deep midi capabilities of the mfc-101 there are many other creative possibilities f...

  • Page 27

    Fractal audio systems mfc-101 manual instant access switches doc v1.0.1 17 5.1.1 list of available axe-fx functions “none” filter 1 multi delay 1 reverb 1 amp 1 filter 2 multi-delay 2 reverb 2 amp 2 filter 3˚ panner/tremolo 1 ring modulator˚ cab 1 filter 4˚ panner/tremolo 2 rotary 1 cab 2 flanger 1 ...

  • Page 28: 5.2

    Instant access switches fractal audio systems mfc-101 manual 18 doc v1.0.1 5.1.4 axe-fx tap tempo as described above, the functions which may be assigned to an ia switch include axe-fx tap tempo, allowing the axe-fx system tempo to be controlled remotely by tapping an instant access switch (#16 is a...

  • Page 29

    Fractal audio systems mfc-101 manual instant access switches doc v1.0.1 19 instant access switches can send the following types of midi instructions when turned on: up to 2 different midi control change messages with custom values (0–127). Any one midi program change command on any channel. Up to 16...

  • Page 30

    Instant access switches fractal audio systems mfc-101 manual 20 doc v1.0.1 5.2.2 other ia switch capabilities each ia switch can be programmed to send a program change command on any midi channel when turned on, and a second such command when turned off. For more information, see ia switch program c...

  • Page 31: 5.3

    Fractal audio systems mfc-101 manual instant access switches doc v1.0.1 21 5.2.4 the save edits footswitch the edit footswitch doubles as a save switch which can be used to store changes to ia switch states on-the- fly without entering edit mode as described above in section 5.2.3 . You may remember...

  • Page 32: 5.4

    Instant access switches fractal audio systems mfc-101 manual 22 doc v1.0.1 5.4 switch links switch links allow you to set up two global groups of 5 mutually exclusive ia switches each. Only one switch in a particular group can be on at a given time. This type of setup is useful for emulating, for ex...

  • Page 33: Internal Ccs

    Fractal audio systems mfc-101 manual internal ccs doc v1.0.1 23 6 internal ccs the mfc-101 allows you to set up 17 “internal control changes”—think of them as virtual switches. These are similar to instant access switches in that they send cc# messages and can have custom on and off values, but unli...

  • Page 34: 6.2

    Internal ccs fractal audio systems mfc-101 manual 24 doc v1.0.1 6.2 preset internal cc states each preset stores whether the on message or the off message will be sent for each enabled internal control change when the selected preset is loaded. This provides a kind of configurable snapshot capabilit...

  • Page 35: Expression Pedals

    Fractal audio systems mfc-101 manual expression pedals doc v1.0.1 25 7 expression pedals 7.1 connecting and calibrating expression pedals allow you to control various sound settings in real time with your foot. Classic examples include the sweep of a wah, whammy or volume pedal. Up to four expressio...

  • Page 36: 7.3

    Expression pedals fractal audio systems mfc-101 manual 26 doc v1.0.1 3. Press page footswitch 15x to get to the global expression pedal setup screen: 4. Press incr or decr to select an expression pedal to edit: xp1, xp2, xp3 or xp4 5. Press parameter footswitch to select the cc# field 6. Tap and/or ...

  • Page 37: External Switches

    Fractal audio systems mfc-101 manual external switches doc v1.0.1 27 8 external switches external footswitches provide an additional means to control your axe-fx or a connected midi device. Each switch can be set up—globally or with custom settings for any given preset—to send custom off and on valu...

  • Page 38: 8.2

    External switches fractal audio systems mfc-101 manual 28 doc v1.0.1 8.2 external switch midi functions external footswitches must be programmed to send midi data. Like expression pedals, external switches may be set up globally, as follows, or individually for “one-off” preset-based switch setups (...

  • Page 39: 8.3

    Fractal audio systems mfc-101 manual external switches doc v1.0.1 29 tog “toggle” – whenever any state change is detected in the connected switch, both the on and off midi messages will be sent in quick sequence (~250ms apart) use this setting if you want a connected momentary switch to behave as if...

  • Page 40: Songs & Sets

    Songs & sets fractal audio systems mfc-101 manual 30 doc v1.0.1 9 songs & sets song mode and set mode are counterparts to preset mode. Remember that all of these share the same set 128 mfc-101 presets, and that axe-fx mode runs independently of all three. Here’s a review of the differences between p...

  • Page 41: 9.2

    Fractal audio systems mfc-101 manual songs & sets doc v1.0.1 31 9.2 adding presets to a song a song is similar to a bank, except that it contains up to 15 mfc-101 presets assigned to the numbered footswitches in any order you choose. Songs are likewise subject to the global bank size and style setti...

  • Page 42

    Songs & sets fractal audio systems mfc-101 manual 32 doc v1.0.1 4. Press the incr or decr footswitches to select a set to edit 5. Press the parameter footswitch to move to the set songs (“slots”) field. 6. Press incr or decr to select one of the 50 set song slot to edit. 7. Press the parameter foots...

  • Page 43: Copy Functions

    Fractal audio systems mfc-101 manual copy functions doc v1.0.1 33 10 copy functions with the likelihood of many entries in your rig being based off of similar templates, the capability to copy settings from one mfc-101 item to another can be a timesaver. Using the copy menu, the following types of i...

  • Page 44: Names

    Names fractal audio systems mfc-101 manual 34 doc v1.0.1 11 names besides preset names, which appear in the display, the mfc-101 stores “friendly” names for many other entities. These can be shown while programming to make it easier to remember all of the connected devices and assigned functions. Th...

  • Page 45: Complete Menu Reference

    Fractal audio systems mfc-101 manual complete menu reference doc v1.0.1 35 12 complete menu reference the following comprises a complete parameter reference for the mfc-101. From within any page of any menu, the following commands apply: page press either of these two footswitches (#5 or #6) to save...

  • Page 46: 12.1

    Preset menu reference fractal audio systems mfc-101 manual 36 doc v1.0.1 12.1 the preset menu use this menu to select presets and edit their parameters, including name, instant access switch states, internal control change states, custom message, and preset external switch and expression pedals. Imp...

  • Page 47

    Fractal audio systems mfc-101 manual preset menu reference doc v1.0.1 37 12.1.2 preset program changes edit : preset : page (2x) preset program changes is used to set the midi program change (pc) messages sent by the currently selected mfc-101 preset. One program change may be set per midi channel, ...

  • Page 48

    Preset menu reference fractal audio systems mfc-101 manual 38 doc v1.0.1 12.1.4 preset internal control change states edit : preset : page (4x) preset internal control change states is used to set whether the on message or off message for each enabled internal control change ( 12.4.11 and 12.4.12 ) ...

  • Page 49

    Fractal audio systems mfc-101 manual preset menu reference doc v1.0.1 39 12.1.6 preset external switch settings edit : preset : page (6x) preset external switch settings is used to make settings for the preset which override the global external switch settings ( 12.4.13 ). You must first select a pr...

  • Page 50

    Preset menu reference fractal audio systems mfc-101 manual 40 doc v1.0.1 12.1.8 preset expression pedal settings edit : preset : page (8x) preset expression pedal settings is used to make midi and initial value settings for the selected preset which override the global expression pedal settings ( 12...

  • Page 51: 12.2

    Fractal audio systems mfc-101 manual song/set menu reference doc v1.0.1 41 12.2 the song/set menu use the pages of this menu to select songs or sets and edit their parameters. For an overview of song and set operating modes, see chapter 9 on p. 30 12.2.0 song edit edit : song/set song edit is used t...

  • Page 52

    Copy menu reference fractal audio systems mfc-101 manual 42 doc v1.0.1 12.2.2 set edit edit : song/set : page (2x) set edit is used to assign mfc-101 songs to the selected set. Each of 10 sets has 50 song “slots.” the parameter footswitches move between set number, set song (aka “slot number”) and s...

  • Page 53: 12.3

    Fractal audio systems mfc-101 manual copy menu reference doc v1.0.1 43 12.3 the copy menu the copy menu is used for copying presets, banks, songs, sets, instant access switches, and internal control change settings from one mfc-101 memory location to another. Note : you cannot copy an entry to itsel...

  • Page 54

    Copy menu reference fractal audio systems mfc-101 manual 44 doc v1.0.1 12.3.2 copy song edit : copy : page (2x) copy song is used to copy mfc-101 songs from one location to another. Use the parameter footswitches to move between the source song and destination song parameters. To execute, press ente...

  • Page 55

    Fractal audio systems mfc-101 manual copy menu reference doc v1.0.1 45 12.3.4 copy instant access switch setting edit : copy : page (4x) copy instant access switches is used to copy the settings from one instant access switch to another. Use parameter footswitches to move between source ia switch an...

  • Page 56: 12.4

    Midi menu reference fractal audio systems mfc-101 manual 46 doc v1.0.1 12.4 the midi menu the midi menu is used to set parameters which determine the midi output of the mfc-101 12.4.0 axe-fx midi channel edit : midi axe-fx transmit channel is used to set the channel on which the mfc-101 will transmi...

  • Page 57

    Fractal audio systems mfc-101 manual midi menu reference doc v1.0.1 47 12.4.3 mfc-101 midi receive channel edit : midi : page (3x) mfc-101 midi receive (“rx”) channel is used to specify the channel on which the mfc-101 will respond to midi program change messages received at its midi in port, if thi...

  • Page 58

    Midi menu reference fractal audio systems mfc-101 manual 48 doc v1.0.1 12.4.6 ia switch axe-fx functions edit : midi : page (6x) the ia switch axe-fx functions setting is used to assign axe-fx functions to each ia switch. These settings are in effect to the exclusion of all other midi messages for t...

  • Page 59

    Fractal audio systems mfc-101 manual midi menu reference doc v1.0.1 49 12.4.7 ia switch control change (cc#) settings edit : midi : page (7x) ia switch control change settings is used to specify the controller number and midi channel for each of two available midi cc commands (c1 and c2) that an ins...

  • Page 60

    Midi menu reference fractal audio systems mfc-101 manual 50 doc v1.0.1 12.4.9 ia switch program change settings edit : midi : page (9x) or page (8x) ia switch program change settings is used to specify a single program change command to be sent on a specified channel when the selected switch is turn...

  • Page 61

    Fractal audio systems mfc-101 manual midi menu reference doc v1.0.1 51 12.4.10 ia switch custom midi messages edit : midi : page (10x) or page (7x) ia switch custom midi message settings is used to enter a 16 byte hexadecimal custom midi message to be sent when a given ia switch is turned on, and an...

  • Page 62

    Midi menu reference fractal audio systems mfc-101 manual 52 doc v1.0.1 12.4.11 internal control change settings edit : midi : page (11x) or page (6x) this page is used to enable individual internal ccs by assigning their cc# and midi channel. Use the parameter footswitches to move between internal c...

  • Page 63

    Fractal audio systems mfc-101 manual midi menu reference doc v1.0.1 53 12.4.13 global external switch settings edit : midi : page (13x) or page (4x) the global external switch settings page is used to set up each of four optional external switches with midi and switch behavior settings. Use the para...

  • Page 64

    Midi menu reference fractal audio systems mfc-101 manual 54 doc v1.0.1 12.4.15 global expression pedal settings edit : midi : page (15x) or page (2x) global expression pedal settings is used to globally configure each of four optional expression pedals with midi and initial value settings. Use the p...

  • Page 65: 12.5

    Fractal audio systems mfc-101 manual setup menu reference doc v1.0.1 55 12.5 the setup menu the mfc-101 will re-synchronize with a connected axe-fx if any axe-fx-related parameters have changed when returning to performance mode from the setup menu with axe-fx mode turned on. 12.5.0 axe-fx mode edit...

  • Page 66

    Setup menu reference fractal audio systems mfc-101 manual 56 doc v1.0.1 12.5.3 mfc-101 display offset edit : setup : page (3x) mfc-101 display offset is used to offset the numbers of mfc-101 presets so they match the preset numbers of a connected axe-fx using display offset (causing its presets to b...

  • Page 67

    Fractal audio systems mfc-101 manual setup menu reference doc v1.0.1 57 12.5.6 bank size edit : setup : page (6x) bank size , a global setting, is used to specify how many footswitches on the mfc-101 will be used to select presets, and how many will be used as instant access switches. Use the incr o...

  • Page 68

    Setup menu reference fractal audio systems mfc-101 manual 58 doc v1.0.1 12.5.8 ia switch types edit : setup : page (8x) ia switch types is used to set the switch behavior for instant access switches. Parameter footswitches select between instant access switch number and switch type parameters. Selec...

  • Page 69

    Fractal audio systems mfc-101 manual setup menu reference doc v1.0.1 59 12.5.10 ia switch link settings edit : setup : page (10x) ia switch link settings is used to set up each of two global groups of mutually exclusive instant access switches. Parameter footswitches move between the link group sele...

  • Page 70

    Setup menu reference fractal audio systems mfc-101 manual 60 doc v1.0.1 12.5.11 send ia switch link off messages edit : setup : page (11x) or page (10x) send ia switch link off messages determines whether the off state midi commands for linked ia switches (see 12.5.10 above) are sent or not sent whe...

  • Page 71

    Fractal audio systems mfc-101 manual setup menu reference doc v1.0.1 61 12.5.13 external switch hardware type edit : setup : page (13x) or page (8x) external switch hardware type is used to set up the mfc-101 according to the physical type of up to four optional external switches—whether momentary (...

  • Page 72

    Setup menu reference fractal audio systems mfc-101 manual 62 doc v1.0.1 12.5.15 global preset edit : setup : page (15x) or page (6x) global preset is used to disable or set the number of the global preset. This is turned off by default. For an overview, see section 4.5, on p.15 to enable the global ...

  • Page 73

    Fractal audio systems mfc-101 manual setup menu reference doc v1.0.1 63 12.5.17 sysex data dump/load edit : setup : page (17x) or page (4x) sysex dump and load is used to transmit a sysex dump containing all of the user settings warning: sysex receive is destructive and cannot be undone! It is stron...

  • Page 74

    Setup menu reference fractal audio systems mfc-101 manual 64 doc v1.0.1 12.5.18 delete and reset factory settings edit : setup : page (18x) or page (3x) delete is used to reset all or some of the mfc-101 to factory settings. Warning: deleting mfc-101 user data is destructive and cannot be undone! It...

  • Page 75

    Fractal audio systems mfc-101 manual setup menu reference doc v1.0.1 65 12.5.19 display contrast edit : setup : page (19x) or page (2x) display contrast is self-explanatory. Adjust as desired using the incr/decr footswitches. 12.5.20 firmware information edit : setup : page (20x) or page (1x) firmwa...

  • Page 76: System Functions

    Appendix fractal audio systems mfc-101 manual 66 doc v1.0.1 13 system functions 13.1 firmware upgrade the firmware of the mfc-101 is field-updateable using a special “boot” (power-on) mode. Firmware updates will be released through our website at http://www.Fractalaudio.Com. Important : it is recomm...

  • Page 77: Appendix

    Fractal audio systems mfc-101 manual appendix doc v1.0.1 67 14 appendix 14.1 comparison table: axe-fx mode on vs. Off axe-fx mode on axe-fx mode off preset name display read from the current axe-fx preset, whether the mfc-101 is in preset, song, or set mode read from mfc-101 preset memory, whether t...

  • Page 78: 14.2

    Appendix fractal audio systems mfc-101 manual 68 doc v1.0.1 14.2 firmware update error codes code description solution 1 invalid start message the sysex start message was corrupted. Retry and if the problem persists then there is a problem with the image. 2 unexpected start message a sysex start mes...

  • Page 79: 14.3

    Fractal audio systems mfc-101 manual appendix doc v1.0.1 69 14.3 axe-fx default bank presets table mfc-preset bank a bank b bank c mfc-preset bank a bank b bank c 000 5 000 128 256 064 064 192 320 001 001 129 257 065 065 193 321 002 002 130 258 066 066 194 322 003 003 131 259 067 067 195 323 004 004...

  • Page 80: 14.4

    Appendix fractal audio systems mfc-101 manual 70 doc v1.0.1 14.4 midi implementation chart function transmitted received remarks basic channel default changed 1 1-16 none 1-16 the mfc-101 is shipped with almost all midi messages disabled. Exceptions are expression pedals 1 and 2, which are used for ...

  • Page 81: 14.5

    Fractal audio systems mfc-101 manual appendix doc v1.0.1 71 14.5 factory default settings this section lists all of the factory default settings for the mfc-101. General configuration: axe-fx mode: on operating mode: preset mfc-101 display offset: 0 bank size: 5 bank style: current link group a: all...

  • Page 82

    Appendix fractal audio systems mfc-101 manual 72 doc v1.0.1 instant access switches (all) type: toggle axe-fx functions: see table 1, below control change 1: see table 2, below control change 2: midi channel 1, cc#: off value = 0, on value = 127 on message program change: midi channel 1, number: off...

  • Page 83: 14.6

    Fractal audio systems mfc-101 manual appendix doc v1.0.1 73 14.6 specifications general presets: 128 songs: 100, up to 15 presets in each song sets: 10, up to 50 songs in each set bank sizes: 1, 5, 10, or 15 bank styles: current, first, none preset midi data program changes: 16 (1 per channel. Axe-f...

  • Page 84: 14.7

    Appendix fractal audio systems mfc-101 manual 74 doc v1.0.1 14.7 custom midi message primer creating custom midi messages for presets or ia switches in the mfc-101 opens a world of possibilities “outside the box.” while any midi data can be stored and sent, the most common types will likely be addit...

  • Page 85

    Fractal audio systems mfc-101 manual appendix doc v1.0.1 75 14.7.2 8.2 control change control change messages consist of three bytes. The first byte is 0xbn, where n is the midi channel number in hexadecimal minus 1. The second byte specifies the continuous controller number and has a range of 0 to ...

  • Page 86: 14.8

    Appendix fractal audio systems mfc-101 manual 76 doc v1.0.1 14.8 warranty fractal audio systems warrants that your new fractal audio systems product shall be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. During the warranty period, frac...

  • Page 87: Index

    Fractal audio systems mfc-101 manual index doc v1.0.1 77 15 index a axe-fx channel, 10 display offset, 10 axe-fx mode enabling or disabling, 9, 55 overview, 9 b bank size, 13 bank style, 14 banks default, 14 c connectors expansion, 4 ext. Switch, 4 midi, 4 pedal, 4 power, 4 copy save, 33 d default b...