Franke FilterFlow mini Installation Manual & Technical Information

Summary of FilterFlow mini

  • Page 1

    Franke filterflow mini cartridge housing installation guide & technical information please retain for future reference franke filterflow mini typical installation.

  • Page 2: Thank You For Purchasing

    Thank you for purchasing a franke filterflow water filter system replacement filter cartridges we recommend that only genuine replacement cartridges and spare parts are used to service your franke filterflow. These can be obtained on-line at www.Frankefilterflow.Co.Uk or call freephone 0808 165 0008...

  • Page 3

    Section 2: important things to consider water supply (water fittings) regulations 1999 familiarise yourself with the requirements of the water supply regulations 1999: www.Legislation.Gov.Uk/uksi/1999/1148/ contents/made maximum working pressure 6 bar/90psi measure the pressure during the ‘low deman...

  • Page 4

    Section 4: principal components section 5: installation shut off the mains water supply install the stop valve install the stopvalve (k) in the chosen position in the adjacent 15mm pipework. Note. For diy installation a self piercing valve is available as an alternative to the stop valve; visit www....

  • Page 5

    Install the filter cartridge and assemble the filter housing unpack the new filter cartridge (e) and screw it into the housing head. Hand tighten the cartridge sufficient to make a watertight seal. Important. Do not overtighten the cartridge. Over tightening may shear off the threaded section of the...

  • Page 6

    6 section 7: frequently asked questions limescale still forms in my kettle the frf02 and frf01 cartridges supplied as standard with franke filterflow systems will not reduce limescale. They are first and foremost a health and security cartridge, designed to significantly reduce possible harmful wate...

  • Page 7

    7 1. Locate the shut-off valve and turn off the mains water supply to the filter housing. 5. Screw the new cartridge in to the head. Tighten it firmly to make a seal. Do not over tighten as this may cause the threaded section to shear. 2. Turn the dispenser tap to “on” to release the pressure in the...

  • Page 8

    Warranty what is covered by the franke filterflow guarantee? - the repair or replacement of your drinking water filter system if your system is found to be defective due to faulty materials or within 2 years of purchase, at the discretion of franke filterflow. - if any part is no longer available or...